Practice Exam:
https://awslagi.com/vmware-cloud-foundation-specialist-5v0-31-22-part-1
https://awslagi.com/vmware-cloud-foundation-specialist-5v0-31-22-part-2
https://awslagi.com/vmware-cloud-foundation-specialist-5v0-31-22-part-3

Q20. A VMware Cloud Foundation administrator is required to enable Workload Management (vSphere with Tanzu) on an existing workload domain cluster, which is currently licensed with a vSphere Enterprise Plus license. Which action, if any, is required to complete this task?

A. Add a license for vSphere with Tanzu with sufficient CPU capacity to both the SDDC Manager and vCenter Server, and then assign the license to the cluster in vCenter Server.
B. Add a license for vSphere with Tanzu with sufficient CPU capacity to the SDDC Manager inventory, and then assign the license to the cluster in SDDC Manager.
C. No action is required since the vSphere Enterprise Plus license supports vSphere with Tanzu.
D. No action is required since SDDC Manager licenses include an entitlement for vSphere with Tanzu.

Q21. Which two requirements are needed to add new hosts to an existing VI workload in a VMware Cloud Foundation environment? (Choose two.)

A. The host uses only the VLAN network.
B. The host uses heterogenous hardware.
C. The host uses a minimum of four network ports.
D. The host uses the same storage type as the existing cluster hosts.
E. The host uses the same network pool.

Q22. Which two configuration steps must a VMware Cloud Foundation administrator apply to achieve north/south connectivity while setting up an edge VM node for a workload domain from the SDDC Manager user interface? (Choose two.)

A. ToR Switches VRFs
B. vSphere VDS Uplinks
C. NSX VDS Uplinks
D. OSPF Configuration
E. BGP Configuration

Q23. An administrator must configure the user authentication for a new VMware Cloud Foundation (VCF) deployment. Where would the identity provider be configured to reach this goal?

A. vCenter Server
B. SDDC Manager
C. Workspace ONE Access
D. vRealize Suite Lifecycle Manager

Q24. What is the correct sequence of steps to add a new VI Workload Domain in a VMware Cloud Foundation environment?

A. 1. Configure DNS.
2. Create a network pool.
3. Commission hosts.
4. Add licenses to SDDC Manager.
5. Create the workload domain.
B. 1. Configure DNS.
2. Commission hosts.
3. Create a network pool.
4. Add licenses to SDDC Manager.
5. Create the workload domain.
C. 1. Create a network pool.
2. Commission hosts.
3. Add licenses to SDDC Manager.
4. Create the workload domain.
D. 1. Create a network pool.
2. Commission hosts.
3. Create the workload domain.
4. Add licenses to SDDC Manager.

Q25. An administrator is tasked with preparing hosts for the deployment of a new Workload Domain in a VMware Cloud Foundation environment. The ESXi hosts have HBA cards that require the installation of a separate and the most recent VMware Installation Bundles (VIBs). Which ESXi imaging method should the administrator use?

A. VMware Imaging Appliance
B. VMware vSphere Auto Deploy
C. Download and burn the base ESXi Installer ISO Image to a DVD
D. VMware vSphere Lifecycle Manager Image

Q26. During a VCF design workshop, the architect gathered the following customer requirements:

• There should be two environments: PROD and DEV.
• PROD and DEV workloads should communicate without traversing the physical network.
• The PROD workload domain should be separate from the DEV workload domain.
• The VCF infrastructure design should be flexible and scalable as much as possible.

How many total NSX manager cluster(s) will be deployed as part of the solution?

A. 1
B. 4
C. 2
D. 3

Q27. During the design phase for a greenfield VMware Cloud Foundation (VCF) deployment, the following design decision has been agreed upon:

• Developer Ready Infrastructure needs to be deployed

The Infrastructure Architect is working with the client to fill the Planning and Preparation Workbook. The Option for ‘Developer Ready Infrastructure using VMware Cloud Foundation’ has been set to ‘Deploy’. The ‘Developer Ready Infrastructure using VMware Cloud Foundation’ is displaying an error, and its Final Result is stating ‘Excluded’.

Which option should be enabled in the Planning and Preparation Workbook to address this issue?

A. Stretched Cluster for Management Domain
B. Clustered Workspace ONE Access
C. Identity and Access Management for VMware Cloud Foundation
D. Stretched Cluster for Workload Domain

Q28. A systems administrator is tasked to deploy VMware Cloud Foundation (VCF) and has already deployed the VMware Cloud Builder appliance. What is the next step the systems administrator should take?

A. Upload the Deployment Parameter Workbook.
B. Configure the Management Domain using custom certificates.
C. Deploy the Management Domain using VMware Cloud Builder.
D. Prepare and configure the ESXi hosts to be used in the deployment.

Q29. Which two configurations are part of the VMware Cloud Builder validation process? (Choose two.)

A. Passwords: Validates specified passwords. Checks for minimum length, invalid characters, and format
B. License key: Validates format, validity, and expiry for ESX, vSAN, vCenter Server, NSX, vRealize Suite, and Log Insight license keys
C. Network configuration: Validates CIDR to IP address validity, IP addresses in use, gateways, invalid or missing VLANs, invalid or missing MTU, and network spec availability for all components
D. Availability configuration: Validates the access to the configured backup locations
E. Certificates: Validates certificates for ESX, vCenter Server, and NSX

Q30. VCF design workshops were conducted, and the architect collected the following customer requirements for the newly planned VCF infrastructure:
The new VCF infrastructure must target two zones: DEV/UAT and DMZ.
The security team would like to have full management and network isolation between these two zones.
12 hosts have been ordered for the solution.
DEV/UAT workloads must comply with an erasure coding vSAN storage policy with the ability to tolerate the failure of two hosts.
Which workload domain sizing will be required to achieve these requirements?

A. 12-hosts workload domain for both zones, having an 8-hosts DEV/UAT cluster, and a 4-hosts DMZ cluster
B. 8-hosts DEV/UAT workload domain, having a 4-hosts DEV cluster, and a 4-hosts UAT cluster, in addition to a 4-hosts DMZ workload domain, having a 4-hosts DMZ cluster
C. 8-hosts DEV/UAT workload domain, having an 8-hosts DEV/UAT cluster, and a 4-hosts DMZ workload domain, having a 4-hosts DMZ cluster
D. 12-hosts workload domain for both zones, having a 4-hosts DEV cluster, a 4-hosts UAT cluster, and a 4-hosts DMZ cluster

Q31. An administrator is tasked with deploying a VMware Cloud Foundation environment that consists of three VI Workload Domains. Each VI Workload Domain is comprised of two clusters, with 18 hosts in each cluster. Which option fulfills this requirement while minimizing the number of NSX-T Manager instances?

A. Deploy one medium-sized NSX-T Manager cluster per VI Workload Domain.
B. Deploy one medium-sized NSX-T Manager cluster for all VI Workload Domains.
C. Deploy one large-sized NSX-T Manager cluster per VI Workload Domain.
D. Deploy one large-sized NSX-T Manager cluster for all VI Workload Domains.

Q32. A systems administrator has recently added newly-commissioned hosts in the VI workload domain, and IP addresses are automatically configured to their associated network pool. The administrator reviews which storage options require only vMotion and NFS networks in the network pool. Which two storage options have this requirement? (Choose two.)

A. vSAN
B. vVols on NFS
C. vSAN and NFS
D. NFS
E. vVols on ISCSI

Q33. A vSphere administrator is tasked with enabling Workload Management on a VMware Cloud Foundation Workload Domain. Which three components are configured as part of the Supervisor Cluster control plane after this task is completed? (Choose three.)

A. Kubernetes Grid Orchestrator
B. Kubernetes Mission Control
C. kubectl-vSphere
D. Spherelet
E. Tanzu Kubernetes Grid Service
F. Container Runtime Executive

Q34. During the design phase for a greenfield VMware Cloud Foundation (VCF) deployment, the following design decisions have been agreed upon:
Stretched Cluster needs to be deployed
Identity and Access Management for VMware Cloud Foundation needs to be deployed
The Infrastructure Architect is working with the client to fill the Planning and Preparation Workbook. The Option for Stretched Cluster has been set to ‘Include’. The ‘Identity and Access Management’ is displaying an error, and its Final Result is stating ‘Excluded’.
Which option should be enabled in the Planning and Preparation Workbook to address the issue?

A. Apply Signed Certificates
B. Consolidated Management Domain
C. Clustered Workspace One Access
D. NSX Routing for Management Domain

Q35. A VMware administrator, who works for the U.S defense department, has been asked to upgrade the VMware Cloud Foundation software in a secure location. Due to security concerns, the VCF environment does not have any internet access.
The administrator can connect a laptop to the SDDC manager network but is not allowed to carry any storage media into the facility. To complete this work, the administrator has been given access to a network port where the laptop can be connected for internet access.
Which steps can the administrator follow to download the latest VCF software bundles?

A. 1. Download the latest VCF software bundles on the laptop.
2. Copy the bundles to SDDC manager using file sharing.
B. 1. Download all required OVAs onto the laptop.
2. Copy them to a USB drive.
3. Attach the drive to the SDDC manager appliance.
C. 1. Copy the bundle transfer utility from SDDC manager onto the laptop.
2. Use the utility to download the latest software bundles for the upgrade.
3. Copy the bundles to SDDC manager using file sharing.
D. 1. Download the latest bundle transfer utility from myvmware.com.
2. Use the utility to download the latest software bundles for the upgrade.
3. Copy the bundles to SDDC manager using file sharing.

Q36. A VMware Cloud Foundation consultant has a requirement to enable task-based backups for the SDDC Manager. What are two steps that need to be pre-configured to achieve this goal? (Choose two.)

A. Register with a VADP image-level backup solution.
B. Create an Image-Based backup job.
C. Register VCSA with a backup proxy.
D. Create a File-Based backup job.
E. Register an external backup repository.

Q37. A vSphere administrator is planning to deploy a new VMware Cloud Foundation environment and is tasked with identifying the necessary external services that will be required for a new stretched-cluster implementation. Which three services should be considered as dependencies in this situation? (Choose three.)

A. BGP
B. DNS
C. NTP
D. vSAN
E. DHCP
F. Syslog

Q38. Which statement accurately describes a Tanzu Spherelet?

A. A Spherelet runs as a VM on the supervisor cluster.
B. The Spherelet runs as an agent on the vCenter server of the Tanzu-enabled VCF workload domain.
C. A Spherelet upgrade does not have any impact on the PODs running on the supervisor cluster node.
D. The Spherelet communicates with the control plane’s API server.

Q39. An administrator is tasked with deploying an additional cluster within VI Workload Domain which has been created with vSAN as a principal storage. Which types of principal storage may the administrator configure during this process?

A. NFS v4.1, VMFS on FC, vSAN
B. vSAN, iSCSI, SMB 3.0
C. iSCSI, vVols, vSAN, NFS v4.1
D. vVols, vSAN, NFS v3, VMFS on FC

Q40. An architect needs to create a VMware Cloud Foundation (VCF) VI Workload Domain design with these requirements:
Design blueprint needs to be repeatable for additional regions

Multiple availability zones –
Seven nodes per availability zone to host the workloads
vSAN storage will be used
What is the maximum accepted latency supported by vSAN between the two availability zones?

A. 5 ms
B. 10 ms
C. 100 ms
D. 150 ms