Yes, NVMe-oF is a significant part of this advanced track. \

Click the Exhibit button. You are asked to serve iSCSI LUNs in an existing SVM on your AFF A220 using ONTAP 9.5. You verified that the iSCSI license is configured on your cluster and that the iSCSI protocol is enabled. Referring to the exhibit, what is needed to allow hosts to log into the iSCSI target?

Correct Answer: Create new LIFs with the iSCSI data protocol.

A company has 20 ESX hosts. Ten of the hosts are connected using FC, and the rest are connected over iSCSI. The FC host HBA queue depth is set to 32, and the iSCSI LUN queue depth is set to 64. The FC hosts are now experiencing random connectivity issues. In this scenario, what would be the reason for the disconnects?

Correct Answer: The queue depth is not consistent across the cluster.

You want to ensure maximum performance of iSCSI LUNs on an AFF A220. In this scenario, which two actions will accomplish this task? (Choose two.)

Correct Answer: Disable flow control.

You are provisioning storage to an ESX host that uses iSCSI. According to NetApp best practice, which three actions accomplish this task? (Choose three.)

Correct Answer: Install Virtual Storage Console (VSC) for VMware.

Click the Exhibit button. A customer has an AFF A700 connected to a Cisco switch and has verified connectivity but cannot see any LUNs. The customer issued the run -node scaling-01 -command fcp topology show command to verify the connection. Referring to the exhibit, what needs to be enabled on the Cisco switch?

Correct Answer: NPIV needs to be enabled.

Click the Exhibit button. A customer is using both FC and NVMe in a cluster. The customer needs to do some work on AFF_1. Referring to the exhibit, what will happen?

Correct Answer: The NVMe namespaces on AFF_1 will be unavailable after takeover by AFF_2.

Click the Exhibit button. You have an existing 2-node AFF A300 cluster with premium bundle licensing applied. You need to have consistently low front end latency, and have determined that NVMe satisfies this requirement. Referring to the exhibit, which two actions would accomplish this task? (Choose two.)

Correct Answer: Apply the license for NVMe.

Click the Exhibit button. Referring to the exhibit, what happens when you change the type for port 1a from target to initiator?

Correct Answer: The port type for 1a changes to initiator, and you must reboot the controller for the changes to take effect.

A customer that is using an AFF A220 has a problem with a host for a new FC LUN. Other LUNs on the same SVM are working properly. This LUN is not visible on the host. Which configuration does the customer need to verify in their solution?

Correct Answer: LUN mapping with igroup

A customer has an existing 8-node cluster that consists of six FAS2650 nodes and two FAS2554 nodes. The customer wants to expand the cluster by adding two AFF A220 nodes. Which resource would be used to determine whether this configuration is supported?

Correct Answer: Hardware Universe (HWU)

You deployed a new SVM for FC access, and you used the vserver fcr, create -vserver svm1 - status-admin up command to enable FC service on the SVM. You then created the LIFs for the FC protocol. When you review the status of the LIFs, they show that the admin status is up, but the operational status is down. You have already verified that the ports are physically connected. In this scenario, what is the next step to bring the LIFs up?

Correct Answer: Use the network interface modify command to change the operational status of the LIFs.

Yes, NVMe-oF is a significant part of this advanced track. \

Welcome to awslagi.com – Sharing AWS, Google Cloud, Microsoft Azure IT Exams. It's free for all!

NetApp Certified Implementation Engineer\xe2\x80\x94SAN Specialist

Become an elite SAN specialist with expert implementation skills for enterprise ONTAP.

4.8★★★★★(282 ratings)

17,748 studentsIntermediate

This NCIE-SAN update validates your ability to implement high-performance SAN environments on modern ONTAP clusters. You will learn about NVMe implementation, advanced Fabric configuration, and how to optimize storage for massive-scale database workloads (Oracle/SQL). Distinguish yourself as a block-storage expert. This certification proves you have the skills to lead complex SAN transformation projects, ensuring the highest levels of performance and reliability for critical business applications.

What you'll learn

NVMe-over-Fabric (NVMe-oF)
- Advanced SAN fabrics (Brocade/Cisco)
- Optimizing for enterprise DBs
- Advanced MPIO and host-side tuning
- SAN security and isolation

NS0-509

Lectures1

Quizzes0

Duration30 week

Students17,748

$20.00

📢 Unlock Full Access to Success!

"The content displayed here is a promotional preview and contains only 50% of the actual exam database. To access the complete set of updated questions, please upgrade to the Full Version."

👉 Click the button and follow the instructions to secure your full access immediately!