Welcome to awslagi.com – Sharing AWS, Google Cloud, Microsoft Azure IT Exams. It's free for all!

HPE7-A08: HPE Network Switching Professional (HPE7-A08)

Master the HP / HPE HPE Network Switching Professional (HPE7-A08) (HPE7-A08) certification exam with 81 realistic practice questions covering Manage, maintain, optimize, and monitor the wired network solution, Troubleshoot the wired network solution, Create the implementation plan for the wired network solution, Install and configure the wired network solution.

4.8★★★★★(352 ratings)
20,838 studentsAdvanced
Prepare for the HP / HPE HPE Network Switching Professional (HPE7-A08) (HPE7-A08) certification with scenario-based practice questions modeled on real exam objectives. You will build practical confidence across key domains including Manage, maintain, optimize, and monitor the wired network solution, Troubleshoot the wired network solution, Create the implementation plan for the wired network solution, Install and configure the wired network solution. Each question includes structured answer options and hint answers to help you identify knowledge gaps quickly, reinforce core HP / HPE concepts, and pass the HPE7-A08 exam on your first attempt.

What you'll learn

  • Manage, maintain, optimize, and monitor the wired network solution
  • Troubleshoot the wired network solution
  • Create the implementation plan for the wired network solution
  • Install and configure the wired network solution

HPE7-A08

Lectures2
Questions81
Duration30 week
Students20,838

$20.00

Full Free Question Bank (81 Questions)

HPE7-A08: HPE Network Switching Professional (HPE7-A08) (HPE7-A08) Practice Questions & Verified Answers

Click any option to test your knowledge, or reveal the verified answer and detailed explanation below each question.

Jump to Section:
Question #1Part 1Manage, maintain, optimize, and monitor the wired network solution

You have configured 802.1X and MAC authentication in an office environment. During testing, you found that devices without 802.1X support take several minutes to obtain an IP address. What can you do to improve the connection time for these devices while maintaining a secure configuration?

ADisable 802.1X on ports connecting to devices that don’t support it.
BIncrease the 802.1X EAPOL timeout value on all ports.
CConfigure auth-precedence to MAC, then 802.1X authentication.
DDecrease the MAC auth start value on all ports.
Question #2Part 1Manage, maintain, optimize, and monitor the wired network solution

You need to perform a packet capture on a CX switch and copy the complete output directly to an SCP server. What is the best method for doing this?

AConfigure a mirror session to the CPU, use tshark to capture it to a PCAP file.
BConfigure a mirror session with another port on the switch as the destination.
CInspect the summary of the packets in real time on the switch using tcpdump.
DConfigure a mirror session using ERSPAN to a computer running Wireshark.
Question #3Part 1Troubleshoot the wired network solution

You are reviewing a VSX LAG configuration and notice thelacp fallbackcommand. Why might it have been configured?

ATo allow operation with active or passive LACP.
BTo support devices that require PXE Boot.
CFor backwards compatibility with LACP v1.
DFor operation using a single partner LACP interface.
Question #4Part 1Troubleshoot the wired network solution

You recently enabled ARP protection on your CX switches, and many users now report that they can no longer access the network. What must you configure to resolve the issue?

AIGMP snooping
BDynamic IP lockdown
CDHCP reservations
DDHCP snooping
Question #5Part 1Troubleshoot the wired network solution

You are investigating a performance problem with a VSX LAG and have executed these troubleshooting commands: ```text show run int 1/1/11 show run int 1/1/11 vsx-peer ``` Which troubleshooting methodology does this demonstrate? show run int 1/1/11 show run int 1/1/11 vsx-peer

ATop-down/Bottom-up
BSpot the difference
CFollow the path
DReplace configuration
Question #6Part 1Create the implementation plan for the wired network solution

A company must run BGP in a multihomed setup with two ISPs and advertise a block of public address space that it owns. Which AS number would be an example of an appropriate number?

A65535
B64813
C63473
D65218
Question #7Part 1Install and configure the wired network solution

An eBGP configuration is established from an HPE Aruba Networking CX 6300 switch to two peers. Both peers advertise the 10.200.0.0/23 subnet using the default configuration. Which configuration implementation would cause the route through peer A to be preferred over peer B?

ADefine a route-map with set local-preference 200 and bind it to peer B BGP import configuration.
BDefine a route-map with set metric 200 and bind it to peer A BGP import configuration.
CDefine a route-map with set local-preference 200 and bind it to peer A BGP import configuration.
DDefine a route-map with set metric 200 and bind it to peer B BGP import configuration.
Question #8Part 1Manage, maintain, optimize, and monitor the wired network solution

Which settings are configurable in a Local User Role?

AVLAN
BClearPass server
CDescription
DAuthentication method
EACL
Question #9Part 1Troubleshoot the wired network solution

Refer to the exhibit from an HPE Aruba Networking CX6000: Two CX 6000 switches are interconnected using LAG 1. Based on the output, which statement is true?

AThe local switch is configured with LACP mode passive.
BThe remote switch is configured with LACP mode static.
CThe remote switch is configured with LACP mode passive.
DThe local switch is configured with LACP mode active.
Question #10Part 1Manage, maintain, optimize, and monitor the wired network solution

OSPF peering is configured between HPE Aruba Networking CX 6300 switches using BFD. Given the following configuration on switch A, with switch B using its default settings: ```text (config-if)# bfd min-transmit-interval=1000 (config-if)# bfd-min-echo-receive-interval=1000 (config-if)# bfd detect-multiplier=5 ``` If a link fails, how long does it take for the relationship to be brought down? (config-if)# bfd min-transmit-interval=1000 (config-if)# bfd-min-echo-receive-interval=1000 (config-if)# bfd detect-multiplier=5

AAfter 1000ms
BAfter 500ms
CAfter 5000ms
DAfter 1500ms
Question #11Part 1Troubleshoot the wired network solution

You applied the following OSPF configuration but receive the output from the command shown below. What is the reason? ![Question Image](https://cdn.examcademy.com/images/questions/1783912135042-n2337i3l.png) ![Question Image](https://cdn.examcademy.com/images/questions/1783912139344-0mic6r4s.png)

AOSPF interfaces are passive by default.
BA Layer-3 interface has not been associated with a VRF.
CA different OSPF process ID is used on each switch.
DA loopback interface hasn’t been configured on Agg-2.
Question #12Part 1Install and configure the wired network solution

Your customer’s CISO wants to deploy colorless ports throughout the network. What must you configure to fulfill this requirement?

AActive gateway
BDownloadable User Roles
CVirtual active forwarding
DDownloadable fingerprints
Question #13Part 1Install and configure the wired network solution

Which source lets you download NAE agent scripts directly through the CX switch UI?

AHPE Networking Support Portal
BAruba Solutions Exchange
CAirheads Community
DGitHub Community
Question #14Part 1Install and configure the wired network solution

A customer already has a gateway cluster that they use to tunnel traffic from APs and wants to configure the same capability for their CX switches. Which tunneling option should be recommended?

AUBT
BGRE
CIPSec
DVNBT
Question #15Part 1Create the implementation plan for the wired network solution

You are discussing with a customer the replacement of an existing L3 aggregation switch pair. How would you describe the HPE Aruba Networking active-gateway as a benefit in the new solution?

AIt has a sub millisecond failover time for the virtual IP.
BIt is supported on stacked HPE Aruba Networking solutions.
CIt can be run in compatibility mode with industry standard first-hop-protocols.
DIt will distribute sessions equally over the switch pair.
Question #16Part 1Manage, maintain, optimize, and monitor the wired network solution

An HPE Aruba Networking CX switch is managed through HPE Aruba Networking Central. If configuration changes must be validated in the switch’s Global view, which information is available from the Audit trail?

AThe configuration changes history is up to 7 years.
BThe configuration difference that was pushed to the device.
CThe method used to create the configuration (template, multi-edit, or GUI).
DThe username of the person who pushed the configuration.
Question #17Part 1Install and configure the wired network solution

Refer to the exhibit. ![Question Image](https://cdn.examcademy.com/images/questions/1783915695143-pdh1ds37.png) The customer wants to use Dynamic Segmentation for wired users in Building B. Which statement is true for this scenario?

AThe CX 6100 switches need to have the CX Premium license applied to support the requirement.
BThe CX 6100 switches need to have a GRE tunnel to the Aruba CX 8325.
CThe CX 6100 switches need to have a VXLAN tunnel to the Aruba 9240.
DThe CX 6100 switches would need to be replaced with CX 6200 series.
Question #18Part 1Troubleshoot the wired network solution

You are trying to configure an interface, but receive the error message below. What could explain this? ```text Access-1(config)# interface 1/1/1 Invalid input: interface ``` Access-1(config)# interface 1/1/1 Invalid input: interface

AThe command must be run from the manager context.
BThe switch is in password recovery mode.
CThe switch is being managed by HPE Aruba Networking Central.
DAuthorization is enabled for CLI commands.
Question #19Part 1Create the implementation plan for the wired network solution

You are deploying a pair of VSX switches alongside existing HPE Comware switches. As part of your migration strategy, you want to configure a common first-hop redundancy protocol. Which of these would be suitable?

AActive Gateway
BHSRP
CVRRP
DActive Forwarding
Question #20Part 1Install and configure the wired network solutionSelect 2

Review the sFlow configuration shown below. Which statements are true? (Choose two.) ![Question Image](https://cdn.examcademy.com/images/questions/1783915699661-30ro3nk8.png)

A1 out of every 1024 data bytes is collected.
BData is collected every 1024 seconds.
CData is collected every 30 seconds.
D1 out of every 30 data bytes is collected.
E1024 out of 1400 data bytes are collected.
Question #21Part 1Manage, maintain, optimize, and monitor the wired network solution

Two companies have merged, and BGP is being used for routing. The customer states that its routing table currently contains about 3,800 routes and wants to keep the overall route count below 5,000. An example BGP routing table from the company being merged is shown below: ![Question Image](https://cdn.examcademy.com/images/questions/1783915592765-gg033hkh.png) Based on this example BGP routing table from the merging company, what should the customer consider to meet the routing-table-size requirement?

ASet the route metrics equal for each prefix
BAdvertise routes only using a primary path
CEnforce routing policies with aggregation
DImport only 0.0.0.0/0 route
Question #22Part 1Install and configure the wired network solution

Refer to the exhibit. ![Question Image](https://cdn.examcademy.com/images/questions/1783915919000-mq4k2rlu.png) A senior network architect created the configuration shown above. You are implementing the setup in Buildings A and B. The actual fiber distance between the building locations is 350 m / 1,148 ft using OM4 cabling. What must be changed in the configuration, based on the actual environmental conditions, to complete the installation?

AChange the 10SR optics to 25LR optics to support distances over 300m / 984ft
BChange the 10SR optics to 10LR optics to support distances over 300m / 984ft
CChange the 10SR optics to 10SR / MMF C-Class XCVR OM4 to support up to 400m / 1312ft distance
DChange the 10SR optics to 25SR optics to support distances over 300m / 984ft
Question #23Part 1Troubleshoot the wired network solution

OSPF peering is configured between HPE Aruba Networking CX 6300 switches using BFD. You made the following configuration on switch B, while switch A remains at its default configuration: ![Question Image](https://cdn.examcademy.com/images/questions/1783913931081-j5d9493m.png) Which BFD Tx/Rx interval values will switch A use in `show bfd session`?

ASwitch A show BFD sessions using 300ms
BSwitch A show BFD sessions using 6000ms
CSwitch A show BFD sessions using 2000ms
DSwitch A show BFD sessions using 500ms
Question #24Part 1Manage, maintain, optimize, and monitor the wired network solution

You have advised that a customer use a modern management approach for their new CX switches. Which of the following would this involve?

AREST API
BYAML
CSNMP
DNAE
EXML
Question #25Part 1Troubleshoot the wired network solution

You have configured a LAG interface to a Gateway on a VSX pair using the following commands. ![Question Image](https://cdn.examcademy.com/images/questions/1783915691020-rzu9ef17.png) After verifying the link aggregation group (LAG) status on the Gateway, only one member link is up. What is the cause?

AThe ‘multi-chassis’ parameter is missing.
BThe ‘vsx-sync’ parameter is missing.
CThe gateway only supports LACP passive.
DLACP fallback should be enabled.
Question #26Part 1Manage, maintain, optimize, and monitor the wired network solution

Which statement about managing VSX switches in HPE Aruba Networking Central is accurate when one switch might not be completely configured?

AConfiguration using MultiEdit is not possible.
BVSX sync can have configuration sync issues.
CRequires switches to run firmware 10.13.x or later.
DConfiguration using the UI interface is not possible.
Question #27Part 1Troubleshoot the wired network solution

You are assisting another engineer in troubleshooting a newly downloadable user-role configuration between CX switches and ClearPass. Which switch configuration should you check?

AHTTPS client certificate
BREST API credentials
CSNMP community string
DUser-role configuration
Question #28Part 1Manage, maintain, optimize, and monitor the wired network solutionSelect 2

You have set up NAE monitoring for CPU and memory utilization and BGP peer state. What are two proactive ways to ensure BGP performs well without triggering NAE alerts? (Choose two.)

AConfigure route reflectors.
BConfigure VRF.
CConfigure route filtering.
DConfigure ECMP.
EOptimize your prefix lists with Regular expressions.
Question #29Part 1Create the implementation plan for the wired network solution

Refer to this partial exhibit from an HPE Aruba Networking CX 8325: ![Question Image](https://cdn.examcademy.com/images/questions/1783912404636-1ixyx3d1.png) If a new CX 8325 is being deployed, which switch profile should be used to deliver gateway and routing services?

AThe L3-agg profile should be selected instead of the factory default.
BSpine profile should be selected instead of the factory default.
CL3-core profile should be used, which is the factory default.
DLeaf profiled should be used, which is the factory default.
Question #30Part 1Install and configure the wired network solution

An HPE Aruba Networking CX switch is configured for IGMP, as shown in the following output: ![Question Image](https://cdn.examcademy.com/images/questions/1783913934424-ff2kupge.png) Which statement is true regarding the possible supported message types?

AJoin and Query
BLeave and Report
CQuery and Report
DJoin, Leave, Query, and Report
Question #31Part 1Troubleshoot the wired network solution

You added a switch that has an existing configuration to an existing group in HPE Aruba Networking Central, but its configuration is not synchronizing. What could be causing this?

AOnly switches with factory default config can be added to a group with existing config.
BAruba-central support mode has not been enabled locally on the switch.
CThe switch is still pending authorization on the organization settings page.
DThe switch is configured in a VSX pair, which HPE Aruba Networking Central does not support.
Question #32Part 1Troubleshoot the wired network solution

You are implementing a design in which the campus network must use a spanning-tree topology isolated from the data center network. The core switches are connected through a single Layer 2 interface that carries multiple VLANs. When you inspect the switches, you find that the campus core regards the data center core as the root bridge. Which configuration can you apply to the campus-to-data-center core link to resolve this issue?

ARoot guard
BBPDU filter
CBPDU guard
DAdmin edge
Question #33Part 1Manage, maintain, optimize, and monitor the wired network solution

You rebootedsw-agg2in a VSX configuration while attempting to live-upgrade the cluster, and then observe this condition: What is the proper method for live-upgrading the VSX cluster?

AUse the issu update-software option.
BAlways reload the primary switch first with the new image.
CUse vsx update-software option.
DSet the VSX to compatibility mode first, before rebooting the secondary switch.
Question #34Part 1Manage, maintain, optimize, and monitor the wired network solution

You are diagnosing a complex, intermittent BGP issue. You must collect all relevant data and be notified of the precise time—and instant—at which the problem occurs. Which monitoring tool is most appropriate for this task?

ADebug destination syslog
BHPE Aruba Networking Central
CSNMP get
DNAE
Question #35Part 1Install and configure the wired network solution

Refer to the following partial exhibit from an HPE Aruba Networking CX 8325: ![Question Image](https://cdn.examcademy.com/images/questions/1785603982993-h69t5uaf.png) A new port on 1/1/25 must be reconfigured for an ISP router using the IP address `10.10.10.2/30`. What configuration correctly provides layer-3 connectivity without the risks of layer-2 loops?

A![](https://cdn.examcademy.com/images/questions/1785603985235-1ijqjoht.png)
B![](https://cdn.examcademy.com/images/questions/1785603987505-oeqxm9cw.png)
C![](https://cdn.examcademy.com/images/questions/1785603989761-s3q2ywe2.png)
D![](https://cdn.examcademy.com/images/questions/1785603992170-lzj1e3io.png)
Question #36Part 1Manage, maintain, optimize, and monitor the wired network solution

A customer is concerned that users might connect unmanaged switches to the network and cause outages. Which CX switch feature should be recommended?

APort security
BBPDU Guard
CLoop protection
DMAC authentication
Question #37Part 1Install and configure the wired network solution

You are deploying CX switches in a network containing over 100 VLANs. Which version of STP should you configure?

ARPVST+
BMSTP
CPVST+
DRSTP
Question #38Part 1Troubleshoot the wired network solution

You are validating a new VSX deployment and have run the command shown below. Based on its output, which statement is true? ![Question Image](https://cdn.examcademy.com/images/questions/1783914299084-pd2qrwgw.png)

AVSX on both switches is in a healthy state.
BISL failure would result in a split-brain condition.
CThis device has the highest configured VSX priority.
DThe ISL has been configured in the mgmt.VRF.
Question #39Part 1Install and configure the wired network solution

Based on the configuration below, OSPF has been configured at a small branch site that requires only one default route to reach the Internet and every other site. However, when you inspect the routing table, additional OSPF routes besides the default route are still present. ![Question Image](https://cdn.examcademy.com/images/questions/1783915686302-jomm9la9.png) Which OSPF area type should you configure?

ATotally Not-So-Stubby Area
BStub Area
CTotally Stubby Area
DNot-So-Stubby Area
Question #40Part 1Install and configure the wired network solution

Which two configuration tasks are required when you create a device profile for an AP?

AAssociate a QoS policy
BAssociate an ACL
CAssociate a role
DAssociate a VLAN
EAssociate an LLDP group
Question #41Part 1Manage, maintain, optimize, and monitor the wired network solution

Which actions are valid for an NAE agent?

AGenerate an SNMP trap.
BSet critical alarm level.
CStart/stop a packet capture.
DCreate a new TAC case.
ELog to a remote syslog server.
Question #42Part 1Troubleshoot the wired network solution

You are investigating a complex routing problem following a recent change. The customer has just called to report that the problem now affects all users. What should you do next?

ACollect a ‘show tech’ and log a case with TAC.
BRestore the last-known working configuration.
CAsk the customer to send logs from each user.
DExplain to the customer what the issue is.
Question #43Part 1Manage, maintain, optimize, and monitor the wired network solution

Refer to the exhibit: ![Question Image](https://cdn.examcademy.com/images/questions/1783915709365-1jnzxocj.png) According to HPE Aruba Networking VSX best practices, what change is required to the configuration?

AReplace the CX8325 1/1/47 and 1/1/48 ports with SFP28 connectivity.
BReplace the CX8325 1/1/47 and 1/1/48 ports with SFP56 connectivity.
CReplace the CX6300[1-2]/1/49 and [1-2]/1/50 ports with QSFP28 connectivity.
DReplace the CX6300 [1-2]/1/49 and [1-2]/1/50 ports with SPF56 connectivity.
Question #44Part 1Install and configure the wired network solutionSelect 2

Refer to the exhibit. ![Question Image](https://cdn.examcademy.com/images/questions/1783915913257-ms95y2sf.png) With the current software running on an HPE Aruba Networking CX 8320 VSX, what is the best method to upgrade the VSX cluster with minimal downtime? (Choose two.)

AUpload new image to the secondary boot-bank on both switches.
BUse vsx update-software boot-bank secondary.
CUse vsx update-software boot-bank primary.
DUse issu update-software confirm.
Question #45Part 1Manage, maintain, optimize, and monitor the wired network solution

You are deploying a directly connected routing design using OSPF between an HPE Aruba Networking CX 6300 and an ISP router. Which configuration change would reduce the OSPF LSDB size?

Aconfigure the network type to broadcast
Bconfigure the network type to point-to-point
Cincrease the OSPF dead timers
Dincrease the OSPF hello timers
Question #46Part 1Troubleshoot the wired network solution

A critical alert from your network monitoring system indicates that the ISL between two VSX core switches is down. What can be determined from the following log output? ![Question Image](https://cdn.examcademy.com/images/questions/1783915710470-sbyz0z24.png)

ABoth switches are forwarding traffic over VSX lags.
BDownstream switches are not able to forward traffic.
CKeepalive packets are being dropped.
DCore-2 has disabled its VSX lag interfaces.
Question #47Part 1Create the implementation plan for the wired network solution

A large hotel customer wants to use one VLAN per floor while isolating each room’s wired network from every other room. Which CX switch feature should you recommend as the simplest solution?

APVLAN
BVPN
CUBT
DVXLAN
Question #48Part 1Manage, maintain, optimize, and monitor the wired network solution

When using Strict Priority (SP) together with other queuing types, how can starvation of lower-priority queues be prevented?

AApply multiple queuing profiles to the same interface.
BConfigure WFQ DWRR instead of queuing.
CApply shaping to queue 7.
DConfigure a higher weight for lower priority queues.
Question #49Part 1Manage, maintain, optimize, and monitor the wired network solution

You need to upgrade a re-provisioned Mobility Gateway that currently uses LACP. Which feature enables this without removing interfaces from the LAG?

ALACP fallback
BLACP active
CLACP passive
DLACP static
Question #50Part 1Troubleshoot the wired network solution

A database administrator reports intermittent connectivity problems with a SQL server hosted in the data center and provides the source and destination IP addresses. Which troubleshooting methodology is most appropriate to begin with?

AFollow the path
BDivide and conquer
CSpot the difference
DTop-down/Bottom-up
Question #51Part 1Install and configure the wired network solution

You have just configured WMM-to-DSCP mapping on your HPE Aruba Networking APs and want to ensure that only the appropriate traffic is prioritized on the wired network. What should you configure to accomplish this?

ADSCP trust on the AP user-role
BDSCP trust on ports connected to APs
CLLDP based on QoS policy
DColorless ports
EDSCP trust globally
Question #52Part 1Manage, maintain, optimize, and monitor the wired network solution

You have advised that a customer use a modern management approach for their new CX switches. Which of the following would this include?

ASNMP
BREST API
CXML
DNAE
EYAML
Question #53Part 1Install and configure the wired network solution

You need to configure BGP on an HPE Aruba Networking switch with AS 65010. What is required when creating peering with neighboring devices that use eBGP AS 65100?

AUse of peer AS65001
BUse of route-reflector
CUse of directory connected peer
DUse of address-family ipv4 internal
Question #54Part 1Manage, maintain, optimize, and monitor the wired network solution

Refer to the exhibit: ![Question Image](https://cdn.examcademy.com/images/questions/1783915599035-c30f1t9n.png) The current startup configuration on the HPE Aruba Networking CX 6300 switch no longer contains a device profile created on the previous day. Based on the exhibit, how can you verify whether the configuration was removed without modifying the current configuration?

AUse show checkpoint to see the changes created between the available checkpoints.
BUse checkpoint diff to check for differences between the startup-config and available checkpoints.
CUse copy startup-config checkpoint <checkpoint-name> to see the changes created between the available checkpoints.
DUse checkpoint rollback to see the changes created between the available checkpoints.
Question #55Part 1Create the implementation plan for the wired network solution

Your company must run BGP in a multihomed configuration with two ISPs and advertise a block of public address space it owns. Which AS number is an example of a suitable number?

A64813
B65218
C63477
D65535
Question #56Part 1Install and configure the wired network solution

What should be configured for an interface connected to a device whose DSCP markings cannot be trusted?

AApply a dscp-map to the interface to assign a Local Priority value.
BConfigure ‘qos trust none’.
CApply a classifier-based policy to the interface to assign a Local Priority value.
DConfigure ‘qos trust cos’.
Question #57Part 1Create the implementation plan for the wired network solution

Refer to the exhibit: ![Question Image](https://cdn.examcademy.com/images/questions/1783915708852-6pzqftzw.png) The customer wants to use Dynamic Segmentation for wired users in Building B. Which statement is true for this scenario?

AThe CX 6100 switches would need to be replaced with CX 6300 series.
BThe CX 6100 switches need to have the CX Advanced license applied to support the requirement.
CThe CX 6100 switches need to have a GRE tunnel to the HPE Aruba Networking 9240.
DThe CX 6100 switches need to have a static VXLAN tunnel to the HPE Aruba Networking CX 8325.
Question #58Part 1Install and configure the wired network solution

You are planning a 10 Gbps connection between two CX switches. Which type of SFP port is required?

ASFP28
BSFP+
CSFP
DQSFP+
Question #59Part 1Troubleshoot the wired network solution

Refer to the exhibit. ![Question Image](https://cdn.examcademy.com/images/questions/1783914294250-0oh79tvr.png) Interfaces 1/1/53 and 1/1/54 were inadvertently disconnected from Switch-A, the primary VSX member. Client A is experiencing network disruption on its connections to Router-

AConfigure VSX shutdown on-split on SW-B.
BConfigure keepalive VLAN on upstream lag.
CConfigure VSX shutdown on-split on SW-A.
DConfigure keepalive using mgmt ports between SW-A and SW-B.
Question #60Part 1Create the implementation plan for the wired network solution

Your company must run BGP in a multihomed setup with two ISPs and advertise a block of public address space that it owns. Which AS number is an example of a suitable number?

A64813
B63476
C65535
D65218
Question #61Part 2Troubleshoot the wired network solution

You are configuring OSPF on every device shown. After checking the OSPF neighbor table on each device, you find that Router-1 and Access-1 have neighbors in the2WAYstate. What is the reason for this?

AThis is normal behavior for OSPF neighbors on a broadcast network.
BRouter-1 and Access-1 have reached a tie in the DR election.
CRouter-1 and Access-1 have no OSPF networks to advertise.
DIGMP snooping has been configured on Router-1 and Access-1.
Question #62Part 2Create the implementation plan for the wired network solution

Your company must run BGP in a multihomed configuration with two ISPs, advertising a block of public address space that it owns. Which AS number would be an example of a suitable number?

A65535
B63479
C65218
D64813
Question #63Part 2Troubleshoot the wired network solution

While troubleshooting a situation in which the customer created a new VLAN on a primary HPE Aruba Networking CX 8100 VSX switch, only some traffic from the connected access switch across a LAG is working. Which troubleshooting methodology should be used to isolate the issue?

AReplace the configuration using the previous checkpoint on the primary VSX.
BDivide and conquer by rebooting the secondary VSX switch.
CFollow the path and check the connectivity from the access to the primary VSX.
DSpot the difference by comparing the VSX switch configurations.
Question #64Part 2Troubleshoot the wired network solution

After IGMP snooping is configured on a Layer 2 VLAN, multicast applications stop functioning. What additional configuration is required?

AEnable IGMP snooping on the Layer 3 interface for the VLAN.
BEnable IGMP on the Layer 3 interface for the VLAN.
CEnable PIM-SM on the Layer 3 interface for the VLAN.
DEnable PIM-DM on the Layer 3 interface for the VLAN.
Question #65Part 2Manage, maintain, optimize, and monitor the wired network solutionSelect 2

Refer to the exhibit. ![Question Image](https://cdn.examcademy.com/images/questions/1783920817842-1sj2zj5u.png) Based on the software currently running on an HPE Aruba Networking CX 8320 VSX, what is the best method for upgrading the VSX cluster with minimal downtime? (Choose two.)

AUse issu update-software validate.
BUse issu update-software confirm.
CUse vsx update-software boot-bank secondary.
DUse vsx update-software boot-bank primary.
EUpload new image lo the secondary boot-bank on both switches.
Question #66Part 2Install and configure the wired network solution

Refer to the exhibit showing an HPE Aruba Networking CX 6300M VSF: ![Question Image](https://cdn.examcademy.com/images/questions/1783920814786-ujuwc3l1.png) Which VSF configuration is required for the stack to operate and avoid split-brain?

Avsd split-detect mgmt
Bvsf conductor-member 2
Cvsf start-auto-stacking
Dvsf secondary-member 2
Question #67Part 2Install and configure the wired network solution

You must enable HTTPS access on an HPE Aruba Networking CX 8100 for SVI 100, which was created after the default settings. How can you meet this requirement?

AUse the command https-server vrf mgmt to allow HTTPS access.
BThe HTTPS server is accessible by default.
CThe HTTPS server is accessible only from mgmt VRF.
DUse the command https-server vrf default to allow HTTPS access.
Question #68Part 2Manage, maintain, optimize, and monitor the wired network solution

A Linux SFTP server is configured with IP address 192.168.1.100, and the CX8325 switch has managed IP address 192.168.1.200. How can the saved switch configuration be backed up to a remote location?

AUse the command scp [email protected]:/ running-config on the SFTP server.
BUse the command scp [email protected]:/ startup-config on the SFTP server.
CUse the command copy running-config sftp://[email protected]/switch_config_cfg vrf default on the switch.
DUse the command copy startup-config sftp://[email protected]/switch_config.cfg vrf mgmt on the switch.
Question #69Part 2Troubleshoot the wired network solution

You attempted to configure DHCP snooping, but it is not operating as expected. Based on the output, what must you configure?

AEnable dhcpv4-snooplng globally.
BEnable dhcpv4-snooplng on VLAN 100.
CConfigure an authorized DHCP server
DConfigure a dhcpv4 trusted interface
Question #70Part 2Manage, maintain, optimize, and monitor the wired network solution

Two companies have merged, and BGP is used for routing. The customer has stated that it currently has about 3,800 routes in the routing table and wants to keep the total route count below 5,000. An example BGP routing table from the company being merged is provided below: ![Question Image](https://cdn.examcademy.com/images/questions/1783915922141-hadaoisy.png) Based on the provided BGP routing-table example from the merging company, what should the customer consider to meet the routing-table-size requirement?

AAdvertise routes only using a primary path
BEnforce routing policies with aggregation
CImport only 0.0.0.0/0 route
DSet the route metrics equal for each prefix
Question #71Part 2Create the implementation plan for the wired network solution

A customer asks whether their new CX switches will support their existing legacy management system. Which of these would this include?

ACLI
BREST API
CNAE
DHTTPS
ESNMP
Question #72Part 2Install and configure the wired network solution

Refer to the exhibit: ![Question Image](https://cdn.examcademy.com/images/questions/1783920810311-ifk87i1m.png) A senior network architect has created the configuration shown. You are implementing the setup in Buildings A and D. The actual fiber distance between the building locations is 90 m / 295 ft, using OM4 cabling. What must be changed in the configuration based on the actual environmental conditions, or what is valid about the configuration?

Asystem interface-group 1 speed 1 /10g for ports 1-4 is the default for CX 8325
Bsystem interface-group 1 speed 25g for ports 1-4 is the default for CX 8325
Csystem interface-group 1 speed 1/10g for ports 1-12 is the default for CX 8325
Dsystem interface-group 1 speed 25g for ports 1-12 is the default for CX 8325
Question #73Part 2Manage, maintain, optimize, and monitor the wired network solution

How would you explain to a new HPE Aruba Networking CX customer how the switch protects against malicious DHCP-server and ARP-poisoning use cases in a network where client-to-server communication is required?

AThe control-plane policy can configured with the allowed DHCP servers.
BThe system configuration database protects the information of authenticated clients.
CDHCP-snooping-table and ARP protection will together maintain valid information.
DPrivate VLANs can be used to isolate the server resources to protect false DHCP servers.
Question #74Part 2Troubleshoot the wired network solution

You are configuring OSPF between two CX switches, but no neighbors appear. Based on the output, how do you resolve the issue? ![Question Image](https://cdn.examcademy.com/images/questions/1783915707850-vkrancps.png)

AConfigure no ip ospf passive on the VLAN 102 interface.
BConfigure no ip ospf cost 100 on the VLAN 102 interface.
CRemove the max-metric router-lsa on-startup to allow faster formation of adjacency.
DConfigure ip ospf network broadcast on the VLAN 102 interface.
Question #75Part 2Troubleshoot the wired network solution

Based on the following output from an HPE Aruba Networking CX 6300: Which statement about the output is true?

AThe defined route map is used in BGP with neighbor remote-as export.
BThe advertised AS path is longer than by default.
CThe advertised routes have a MED value of 100.
DThe advertised AS paths are configured in an IP prefix-list.
Question #76Part 2Manage, maintain, optimize, and monitor the wired network solution

Your customer’s CX switches are managed in HPE Aruba Networking Central. If a VSX primary switch is unintentionally powered off, which alert will be triggered?

ASwitch Reboot
BSwitch Disconnected
CSwitch Stack Conductor Change
DSwitch STP Root Change
Question #77Part 2Troubleshoot the wired network solution

You have successfully configured an eBGP connection that is in the **established** state with two ISPs. After further testing, you find that Internet connectivity does not work, and both ISPs state that they are not receiving a route for your company’s /24 public address range. What further configuration is needed?

AApply an inbound route-map allowing a prefix-list matching the /24 to the ISP peering interfaces.
BConfigure a static route to the /24 via a loopback interface and redistribute connected routes into BGP.
CCreate a loopback interface with an address within the /24 and enable BGP on the loopback interface.
DConfigure a static null route to the /24 public network while creating a matching network statement in the BGP config.
Question #78Part 2Troubleshoot the wired network solution

You recently changed a switch configuration and, soon afterward, observed a spike in CPU utilization in the NAE dashboard. You are concerned that the high CPU may be impacting users. What should you do to restore services as quickly as possible?

AReboot the switch.
BPause NAE monitoring.
CRevert the change.
DDisable debug logging.
Question #79Part 2Troubleshoot the wired network solution

After configuring BFD for OSPF, monitoring alerts indicate high CPU utilization on the switches. Based on the configuration below, how should the issue be resolved?

AEnable ICMP active mode.
BEnsure BFD is enabled on all passive OSPF interfaces.
CEnable BFD echo mode.
DDisable ICMP redirects.
Question #80Part 2Troubleshoot the wired network solution

You added a switch that already has a configuration to an existing group in HPE Aruba Networking Central, but its configuration is not synchronizing. What could be the cause?

AThe switch is configured in a VSX pair, which HPE Aruba Networking Central does not support.
BOnly switches with factory default config can be added to a group with existing config.
CConfiguration auto-commit has been disabled for the group in HPE Aruba Networking Central.
DThe switch is still pending authorization on the organization settings page.
Question #81Part 2Install and configure the wired network solution

With the QoS queueing configuration below on a 1000Mbps interface, how much bandwidth will be available to Local Priority 4 traffic when no other traffic type is being sent?

A1000Mbps
B500Mbps
C200Mbps
D100Mbps

📢 Unlock Full Access to Success!

"The content displayed here is a promotional preview and contains only 50% of the actual exam database. To access the complete set of updated questions, please upgrade to the Full Version."

👉 Click the button and follow the instructions to secure your full access immediately!