What does Flow Control functionality offer?
Ethernet flow control manages congestion by sending PAUSE frames that temporarily halt Ethernet transmission, allowing an overloaded receiver time to process buffered traffic.
Master the HP / HPE Architecting Multi-Site HPE Storage Solutions (HPE0-J79) (HPE0-J79) certification exam with 27 realistic practice questions covering Architecting Multi-Site HPE Storage Solutions.
HPE0-J79
$20.00
Click any option to test your knowledge, or reveal the verified answer and detailed explanation below each question.
Ethernet flow control manages congestion by sending PAUSE frames that temporarily halt Ethernet transmission, allowing an overloaded receiver time to process buffered traffic.
The HPE 3PAR ASIC offloads data processing and data movement from the controller’s control processors, separating metadata/control work from I/O data-path work. This reduces processor contention and enables more consistent performance for mixed IOPS- and throughput-intensive workloads, including workloads that add replication processing. HPE documents that the ASIC enables this separation so transaction-intensive workloads are not delayed by throughput-intensive workloads.
HPE StoreServ Management Console (SSMC) centralizes 3PAR management and reporting, including system health summaries and performance analytics. Its dashboard and analytics capabilities support rapid evaluation of StoreServ health and performance.
High I/O wait and approximately 30 ms average I/O latency indicate that storage response time is constraining the Oracle workloads. An HPE 3PAR all-flash array provides the low-latency, high-IOPS media needed to reduce that bottleneck; 16 Gb/s StoreFabric complements the array with a high-speed host connection. Spinning-disk and hybrid configurations retain dependence on slower disk media or cache effectiveness, so they are less suitable for directly and consistently resolving the observed latency.
Inter Volume Group Fast Resync eliminates the need for a full Remote Copy resynchronization after moving a volume between Remote Copy volume groups. Avoiding the full data transfer uses intersite bandwidth efficiently and minimizes the performance effect on Remote Copy operations.
HPE 3PAR Peer Persistence uses synchronous Remote Copy to provide transparent host-I/O failover between paired storage systems at metropolitan-distance data centers. This enables a deployment to begin with a locally redundant array and later add a peer array at the second site for geographically independent availability. The capability is supported across current HPE 3PAR StoreServ models subject to the applicable support matrix and required software configuration; identical controller-node counts are not the defining requirement.
If a primary site is permanently lost in a two-site HPE StoreVirtual Multi-Site SAN, quorum can be manually recovered at the secondary site by using the Recover Quorum command-line function with HPE Support. Automatic protection requires an appropriately deployed third-site Failover Manager, so it is not the recovery action after this loss of quorum.
HPE Single Point of Connectivity Knowledge (SPOCK) provides HPE storage compatibility matrices and interoperability information, including supported connectivity configurations. It is the appropriate resource for validating storage-system support with a particular switch.
HPE 3PAR StoreServ is differentiated by its Mesh-Active architecture, which uses a high-speed full-mesh interconnect to make volumes active across controllers, and by purpose-built ASICs that offload storage data-processing functions. Its management capabilities are also a key design comparison area because they affect operational simplicity and administration.
Thin deduplication removes redundant data blocks, reducing the flash capacity that must be purchased. Adaptive sparing distributes spare capacity across SSDs rather than reserving dedicated spare drives, increasing usable capacity while retaining drive-failure protection. Together, these technologies reduce the effective cost per usable gigabyte of an all-flash system.
HPE 3PAR Peer Persistence provides transparent array failover for stretched host clusters. It uses ALUA to present optimized paths to the primary array and redirect I/O to the surviving array when the primary storage array fails.
File Persona Remote Copy failover unmounts the File Provisioning Group (FPG) on the source system and mounts it on the target system. This interrupts established NAS sessions, so clients must reconnect to their NAS shares after the failover completes.
Jumbo Frames and MTU settings must be configured consistently end to end across the iSCSI network path, including the initiator, target, network adapters, and every intervening switch. A device that does not support the configured larger frame size breaks the end-to-end Jumbo Frame configuration. Microsoft’s iSCSI guidance specifically requires consistent MTU settings across the entire iSCSI path.
Virtual Volumes used by the same application, such as its data and log volumes, should be placed in the same Remote Copy group. This supports application-level failover and replication consistency.
HPE StoreOnce Backup provides a local disk-based backup target for rapid recovery and can efficiently replicate or copy deduplicated backup data to an off-site StoreOnce target for disaster recovery and long-term retention.
Periodic Asynchronous Remote Copy acknowledges writes locally and replicates changed data at defined intervals, avoiding the synchronous remote-write acknowledgment delay that WAN latency and limited bandwidth impose on application I/O. It trades zero data-loss recovery point objectives for improved production I/O performance.
Express Protect uses StoreOnce Catalyst to perform direct backups from supported storage arrays to HPE StoreOnce Backup systems. The required license is an HPE StoreOnce Catalyst license; HPE states this is the only license needed to unlock the feature.
FLOGI exchanges fabric-login service parameters between the N_Port and F_Port. It also negotiates the receive buffer-to-buffer credit values used for link-level flow control; each side uses the peer's advertised receive credit value as its transmit credit value.
Data Protector Automated Replication Synchronization (ARS) synchronizes replicated backup media information and metadata so that the receiving Data Protector environment recognizes replicated media. This provides the catalog awareness missing when StoreOnce VTL replication occurs independently at the storage layer.
I/O path preferencing sets preferred host-to-storage paths so application servers use storage systems at their local site, reducing cross-site I/O under normal operation.
HPE 3PAR’s Online Import capability provides hardware-assisted migration from supported third-party storage systems. It can migrate volumes and host configuration information to a 3PAR system without changing host configurations or interrupting data access, reducing the complexity and professional-services effort of moving to a new vendor platform.
HPE Smart SAN for HPE 3PAR includes Target Driven Peer Zoning, which automates zoning for supported SAN fabrics. HPE OneView can also perform SAN auto-zoning with Broadcom Brocade Fibre Channel switch fabrics through a Brocade Fabric OS SAN manager.
Jumbo-frame sizing and configuration can differ between switch vendors, including how Ethernet overhead is accounted for. The selected MTU/frame size must be compatible across the entire iSCSI data path; enabling jumbo frames only on storage nodes or only on switch ports is insufficient.
Application-managed snapshots coordinate the workload with storage snapshot creation so pending writes and transactions are flushed or quiesced before capture. This provides an application-consistent recovery point; an array snapshot alone can otherwise contain incomplete application state.
HPE 3PAR Peer Persistence keeps failback completely transparent to the hosts and the applications running on them, just as it does for failover. The return to the original configuration does not require host-side disruption or reconfiguration.
HPE Smart SAN supports select HPE FlexFabric 5900CP switches and supported HPE StoreFabric Fibre Channel host adapters, including QLogic Fibre Channel HBAs. Smart SAN is implemented across the storage array, supported SAN switches, and supported FC host adapters; it does not require an H-series SAN switch or a physical 3PAR Service Processor.
FIPS 140-2 is a U.S. government compliance standard that defines security requirements and validation levels for cryptographic modules.
Explore related HP exam dumps and free practice question banks.
"The content displayed here is a promotional preview and contains only 50% of the actual exam database. To access the complete set of updated questions, please upgrade to the Full Version."
👉 Click the button and follow the instructions to secure your full access immediately!