Welcome to awslagi.com – Sharing AWS, Google Cloud, Microsoft Azure IT Exams. It's free for all!

HPE7-A07: HPE Campus Access Mobility Expert (HPE7-A07)

Master the HP / HPE HPE Campus Access Mobility Expert (HPE7-A07) (HPE7-A07) certification exam with 29 realistic practice questions covering Connectivity, Troubleshooting, Routing, WLAN.

4.8★★★★★(383 ratings)
20,837 studentsIntermediate
Prepare for the HP / HPE HPE Campus Access Mobility Expert (HPE7-A07) (HPE7-A07) certification with scenario-based practice questions modeled on real exam objectives. You will build practical confidence across key domains including Connectivity, Troubleshooting, Routing, WLAN. Each question includes structured answer options and hint answers to help you identify knowledge gaps quickly, reinforce core HP / HPE concepts, and pass the HPE7-A07 exam on your first attempt.

What you'll learn

  • Connectivity
  • Troubleshooting
  • Routing
  • WLAN
  • Network Resiliency and virtualization
  • Switching

HPE7-A07

Lectures1
Questions29
Duration30 week
Students20,837

$20.00

Full Free Question Bank (29 Questions)

HPE7-A07: HPE Campus Access Mobility Expert (HPE7-A07) (HPE7-A07) Practice Questions & Verified Answers

Click any option to test your knowledge, or reveal the verified answer and detailed explanation below each question.

Question #1Part 1Connectivity

You are deploying a new AOS-10 mobility gateway cluster. Because of customer requirements, the gateways must use static IP addresses and may communicate on port 443 only with URLs matching `*.central.arubanetworks.com`. How can these gateways be successfully onboarded into HPE Aruba Networking Central?

AChoose Static Activate and Configure:• system name• switch role• ACP FQDN address• uplink port information• IP address and default gateway• DNS IP address• controller country code• timezone and clock• admin password
BChoose Full Setup and Configure:• system name• switch role• ACP FODN address• uplink port information• IP address and default gateway• DNS IP address• controller country code• timezone and clock• admin password
CChoose Static Activate and Configure-• controller VLAN• uplink port information• IP address• default gateway• DNS IP address
DChoose Full Setup and Configure:• controller VLAN• uplink port information• IP address and default gateway• DNS IP address
Question #2Part 1Troubleshooting

You configured a tunneled SSID with a captive portal and an HPE Aruba Networking ClearPass Guest Self Registration workflow. During testing, after you launch the self-registration workflow and registration succeeds, the login action displays the following error: ![Question Image](https://cdn.examcademy.com/images/questions/1784313799874-mwregmwa.png) What is the best solution for resolving this error?

AYou need to be connected to the guest SSID while testing.
BYou need to include the root and intermediate certificates in the captive portal certificate for your access points.
CYou need to change the Login Address in ClearPass to securelogin.arubanetworks com.
DYou need to include the root and intermediate certificates in the captive portal certificate for your gateway.
Question #3Part 1Routing

A BGP routing table has several routes to the same destination prefix. With reference to the table below, which route would be indicated by a>symbol?

AA
BB
CC
DD
EE
Question #4Part 1WLANSelect 2

A university operates a campus with several buildings divided into east and west wings that are L3-separated. The east wing has 1600 APs, while the west wing has 1200 APs. Each wing has one gateway cluster managed by HPE Aruba Networking Central, and each cluster contains a single 7210 mobility gateway. The gateways use DHCP relay and route every client VLAN. A new business-critical, real-time faculty application requires users to roam within their wings, but not between wings, with no disconnections or added delay. Which changes must the network administrator make to meet this requirement successfully, without performance degradation and in accordance with best practices? (Choose two.)

ARemove the DHCP relay from the gateways and enable the DHCP server instead
BReplace the 7210 mobility gateway in the east wing with a pair of 9012 mobility gateways.
CRun L2 for all SSIDs and permit the users’ VLANs in the gateway's uplinks.
DAdd a single 7210 mobility gateway to each cluster.
EReplace the 7210 mobility gateway in the west wing with a pair of 7030 mobility gateways.
Question #5Part 1Routing

Refer to the exhibits. ![Question Image](https://cdn.examcademy.com/images/questions/1784311044289-xf8h4ks5.png) An engineer applied the displayed configuration to R1 and R2. However, the routers’ OSPF adjacency never advances beyond the `EXSTART/DR` state, as shown below. ![Question Image](https://cdn.examcademy.com/images/questions/1784311049986-yslkjjom.png) Which configuration action on either router will enable R1 and R2 to advance past the `EXSTART/DR` state?

ARemove the layer 3 MTU configuration.
BEnsure the OSPF process is not configured with passive-interface default
CChange the IP address and mask applied to interface 1/1/1
DChange R1 and R2 to a network type of point-to-point.
Question #6Part 1WLAN

Refer to the exhibit. Which wireless connection phase has just finished?

AL3 authentication and encryption
BMAC Authentication and 4-way handshake
C802.11 enhanced open association
DL2 authentication and encryption
Question #7Part 1Network Resiliency and virtualization

A customer's infrastructure is configured, following best practices, to use both primary and secondary gateway clusters in the SSID profile. What is a valid reason that AP connections are evenly divided between the primary and secondary gateway clusters?

AThe primary gateway cluster is up. but some APs are unable to reach the primary gateway cluster. These APs would connect to the secondary gateway cluster.
BThe primary gateway cluster is up. but some APs cannot reach the secondary gateway cluster These APs would connect to the secondary gateway cluster.
CThe secondary gateway cluster is heterogeneous.
DThe secondary gateway cluster is homogeneous.
Question #8Part 1Switching

A campus topology uses VSX in a collapsed-core topology. The customer added redundant SFP+ transceivers and reconfigured its mobility gateways from a single link to an aggregate link. You are asked to verify the CLI output for the link-aggregation configuration for one mobility gateway cluster member below. ![Question Image](https://cdn.examcademy.com/images/questions/1785602716052-ul1rmu7l.png) Which configuration is valid?

A![](https://cdn.examcademy.com/images/questions/1785602718814-as2gyh97.png)
B![](https://cdn.examcademy.com/images/questions/1785602721222-507nch6s.png)
C![](https://cdn.examcademy.com/images/questions/1785602724367-z0d3uks6.png)
Question #9Part 1Network Resiliency and virtualization

A customer's infrastructure follows best practices by using both primary and secondary gateway clusters in the SSID profile. Why are its 144 APs split equally between the primary gateway cluster and the secondary gateway cluster?

AThe primary and secondary gateway clusters are up. but the cluster preemption is not enabled.
BThe primary and secondary gateway clusters are up. and the cluster preemption is enabled.
CThe secondary gateway cluster is a homogeneous cluster with six nodes.
DThe secondary gateway cluster is a heterogeneous cluster with four nodes.
Question #10Part 1Routing

An OSPF router learns a route to an external network through both an E1 and an E2 advertisement. Both routes have identical path costs. Which route will the router prefer?

AThe router will prefer the E1 path.
BThe router will prefer the E2 path.
CThe router will use both paths equally utilizing ECMP.
DBoth routes will be suppressed until the path conflict has been resolved.
Question #11Part 1WLAN

Refer to the exhibit. Which statement is correct?

AThe SSID supports implicit beamforming.
BThe SSID supports sending neighbor reports.
CThe SSID supports RC4 encryption.
DThe SSID supports 802.11ac clients.
Question #12Part 1WLAN

A customer wants to let its IT Helpdesk configure IoT devices to connect to one SSID with a unique PSK that cannot be used by other devices. Which solution would you recommend?

AMPSK Local
BMPSK AES with HPE Aruba Networking ClearPass
CMPSK AES with HPE Aruba Networking Central Cloud Authentication
DMPSK AES with MAC Auth
Question #13Part 1Switching

A customer is evaluating device profiles on a CX 6300 switch. The test device has these attributes: - MAC address = `81:cd:93:13:ab:31` - LLDP sys-desc = `iotcontroller` The test device is assigned the `iot-dev` role. However, the customer requires the `iot-prod` role to be applied. ![Question Image](https://cdn.examcademy.com/images/questions/1784313808178-flntoz6x.png) Given the configuration, what causes the `iot-dev` role to be applied to the device?

AAn external RADIUS server is unreachable.
BThe device-profile precedence order is not configured.
CThe LLDP system description matches the lldp-group configuration.
DThe test device does not support CDP
Question #14Part 1Authentication/Authorization

You configured WPA3-SAE with the following MAC Authentication Role Mapping in HPE Aruba Networking Central Cloud Authentication and Policy: ![Question Image](https://cdn.examcademy.com/images/questions/1784313814247-x83156ot.png) Assuming all other settings remain at their defaults, a new Android phone connects to the network. Which role is assigned to the client on its first connection?

Aiot-local
Bclient will be rejected network access
Cbyod
Dunmatched-device
Question #15Part 1Switching

A client connected to a tunneled open network is receiving an incorrect VLAN. Your customer has a gateway and provided a packet capture from a switch-port mirror on the upstream switch, along with packet captures from the IPsec tunnel and the GRE tunnel, to help identify the VLAN sent from the controller to the AP. Where can the VLAN assignment be seen?

AThe GRE tunnel will include the VLAN tag assignment.
BVLAN tag assignment will not be captured in any of the packet captures.
CVLAN tag assignment will be included in the port mirror.
DIPsec tunnel will include the VLAN tag assignment.
Question #16Part 1Performance OptimizationSelect 2

ACME has an AOS-CX 6200 VSF switch stack with an uplink oversubscription ratio of 9.6:1. Its low-priority TCP traffic is marked with a yellow DSCP color. Refer to the exhibit. ![Question Image](https://cdn.examcademy.com/images/questions/1784313812751-j7i3blry.png) The company is considering adding two more nodes to the stack without adding uplinks because of existing wiring constraints. An architect has proposed this configuration: ![Question Image](https://cdn.examcademy.com/images/questions/1784313815759-g7hufwcx.png) What is the impact of applying the `acmethreshold` profile as shown? (Choose two.)

AAll upper-layer protocol traffic egressing LAG1 will be subject to drop probability
BAll TCP traffic egressing LAG1 will be subject to drop probability
CVoIP packets egressing any queue on LAG1 will more likely be protected from uplink over-utilization
DYellow-flagged TCP traffic egressing LAG1 will be subject to drop probability
EOnly VoIP packets egressing queue 5 on LAG1 will likely be protected from uplink over-utilization
Question #17Part 1Authentication/Authorization

Refer to the exhibit. Which user role is assigned when a voice client attempts to connect for the first time while the RADIUS server is unavailable?

ACRITICAL_VOICE
BCRITICAL_AUTH
CPRE_AUTH
DDEFAULT_AUTH
Question #18Part 1WLAN

A new SSID was created with the security settings shown. ![Question Image](https://cdn.examcademy.com/images/questions/1784311045889-84qt27l4.png) Some, but not every, user reports that their client device cannot connect to this SSID. What is the reason?

AWPA3 Enterprise is not backward compatible with WPA2 Enterprise.
BThe WPA3 Enterprise GCM-256 mode does not support transition mode
CThe primary server's shared key differs from the shared key configured for this server on HPE Aruba Networking Central.
DMAC authentication after a failed 802.1X authentication is not possible as the option "MAC Authentication Fail-Through" is disabled
Question #19Part 1Troubleshooting

An AOS-10 multi-site deployment includes sites with AP-only bridged SSIDs and other sites with APs and gateways running tunneled SSIDs. Client session-state synchronization errors occur between secure lab environments and public-facing areas at several sites. What is causing these issues?

AThe sites with issues are the overlay AP with gateway sites because the connection to HPE Aruba Networking Central is interrupted.
BThe sites with issues are the AP-only deployments because the connection to HPE Aruba Networking Central is interrupted.
CThe DTLS connections are down between APs in the lab and APs in public areas.
DThe affected clients are associated with an SSID with 11r and 11k disabled.
Question #20Part 1WLAN

A customer recently deployed a wireless system using AP-535s to provide connectivity for employees responsible for uploading large video files for review. The customer wants to use features that deliver throughput gains for large data uploads. Which feature can be enabled to satisfy the requirement while also allowing spatially separated clients to access the channel?

AUL MU-MIMO
BDL MU-MIMO
CUL-TXBF
DOFDMA
Question #21Part 1Troubleshooting

A customer has a gateway connected to a device on gigabitethernet 0/0/3 and configures an Asset ID TLV on the device for inventory management. See the exhibit. ![Question Image](https://cdn.examcademy.com/images/questions/1784311101672-g35y65uc.png) The customer reports that the Asset ID is not displayed. What is causing this issue?

ALLDP TX is not enabled
BLLPD-MED needs to be enabled
CMTU size is too small.
DUnknown TLVs cannot be displayed
Question #22Part 1WLAN

A network administrator needs to configure an 802.1 X supplicant for a wireless network that includes: 1. AES encryption 2. EAP-MSCHAPv2-based user and machine authentication 3. Server-certificate validation in Microsoft Windows 10 The network administrator creates a WLAN profile and selects the **change connection settings** option. The administrator then changes the security type to **Microsoft: Protected EAP (PEAP)** and enables user and machine authentication under **Additional Settings**. What must the network administrator do next to complete the task?

AChange default RC4 encryption for AES.
BEnable server certificate validation
CChange the security type to Microsoft: Smart Card or other certificate.
DEnable user authentication.
Question #23Part 1Troubleshooting

A customer added third-party USB dongles to the USB ports on their AOS-10 access points. The customer uses AP-615 and AP-635 access points. Each AP connects by a Cat 6A cable to a CX 6300F Class 4 PoE switch. All APs are in the same group in HPE Aruba Networking Central and use the same configuration. However, many dongles do not power up. Which option will resolve this issue?

AMove the AP-635 access points to a different group in HPE Aruba Networking Central to configure the dongles separately from the AP-615.
BReplace the Class 4 PoE switches with Class 6 PoE switches.
CCreate two separate service profiles in the IoT tab of the HPE Aruba Networking Central configuration settings.
DPerform a "poe disable" followed by a "poe enable" for the switch ports which connect to the APs so that the APs reboot.
Question #24Part 1Routing

Refer to the exhibits. ![Question Image](https://cdn.examcademy.com/images/questions/1784311101825-iwiuz9ll.png) ![Question Image](https://cdn.examcademy.com/images/questions/1784311105474-o3qesqkg.png) Which statement is true based on the following CLI output from a CX 6300?

AThere are no active fabric clients on the CX switch with RD 172.16.10.1.
BA wired client with IP address 10.203.1.100 has a host route that is not being properly advertised.
CThe overlay loopback addresses are advertised in the fabric with 24-bit subnet masks.
DA wired client with IP address 10.203.1.100 is on a remote CX 6300 in the fabric with loopback IP address 172.21.11.2.
Question #25Part 1Troubleshooting

Employees at your customer’s site who are connected to the wired network report a poor user experience. The customer has HPE Aruba Networking User Experience Insight (UXI) sensors deployed on premises. These sensors have been operating for several months. They test both the wired network (through each sensor’s wired interface) and the wireless networks. The customer used the UXI dashboard to identify the cause of the poor user experience. For further details, the customer asked you to review the packet captures downloaded from the sensors through the UXI dashboard. In the `.zip` file downloaded from the UXI sensors, you examined the `"datagrams"` `.pcap` file but could not find any issues. How can this be explained?

AThe datagrams captured on the physical Ethernet interface are in a different pcap file
BThe "datagrams" pcap file only contains the successful tests. Failed tests are contained in the "datagrams-failed" pcap file
CThe UXI sensor could not upload the latest test results to the cloud, so the packet capture is outdated
DThe default filters of the packet captures do not allow failed tests to be captured by the sensor.
Question #26Part 1Security

A customer says their HPE Aruba Networking ClearPass Guest captive portal is not working. The page loads, but users cannot browse after they select **Connect**. They have uploaded a valid, publicly trusted `*.aruba-training.com` certificate. Refer to the exhibit. ![Question Image](https://cdn.examcademy.com/images/questions/1784313817196-jbw6bjun.png) Which option would explain this problem?

A*.aruba-training.com needs to be entered in the Address field for the ClearPass Guest.
BHTTPS certificate is not required in ClearPass Guest
CHTTPS wildcard certificates are not supported.
Dcaptiveportal-login.aruba-training.com needs to be entered in the Address field for the ClearPass Guest
Question #27Part 1Connectivity

Refer to the exhibit. ![Question Image](https://cdn.examcademy.com/images/questions/1784313796587-puki2nok.png) After VRRP has been configured between SW-1 and SW-2, both switches appear as active. What could be causing this issue?

AVRRP preemptive mode is disabled.
BSW-1 can’t reach SW-2 on VLAN 10.
CBoth switches are configured as VRRP 'primary.'
DSW-2 has no priority configurations for VRRP 1.
Question #28Part 1Network Resiliency and virtualization

A customer's infrastructure is configured to use both primary and secondary gateway clusters in the SSID profile. What is a valid reason for an AP to fail over to the secondary gateway cluster?

AThe secondary gateway cluster is up. but the AP is unable to reach the secondary gateway cluster.
BThe secondary gateway cluster is homogeneous
CThe secondary gateway cluster is heterogeneous.
DThe primary gateway cluster is up. but the AP is unable to reach the primary gateway cluster.
Question #29Part 1Network Resiliency and virtualization

Which configuration is recommended to ensure consistent link aggregation in a campus topology that uses VSX with two aggregation switches and downlinks to access switches?

AKeep the MTU values at the default setting for GRE and VXLAN communications.
BUse the command "vsx-sync mclag-interfaces" under the VSX context.
CUse the command "vsx-sync active-gateways" under the VSX context.
DUse a custom LACP hash algorithm for improved load balancing.

📢 Unlock Full Access to Success!

"The content displayed here is a promotional preview and contains only 50% of the actual exam database. To access the complete set of updated questions, please upgrade to the Full Version."

👉 Click the button and follow the instructions to secure your full access immediately!