Welcome to awslagi.com – Sharing AWS, Google Cloud, Microsoft Azure IT Exams. It's free for all!

HPE7-A01: HPE Network Campus Access Professional (HPE7-A01)

Master the HP / HPE HPE Network Campus Access Professional (HPE7-A01) (HPE7-A01) certification exam with 78 realistic practice questions covering Switching, Authentication/Authorization, WLAN, Security.

4.8★★★★★(319 ratings)
20,831 studentsAdvanced
Prepare for the HP / HPE HPE Network Campus Access Professional (HPE7-A01) (HPE7-A01) certification with scenario-based practice questions modeled on real exam objectives. You will build practical confidence across key domains including Switching, Authentication/Authorization, WLAN, Security. Each question includes structured answer options and hint answers to help you identify knowledge gaps quickly, reinforce core HP / HPE concepts, and pass the HPE7-A01 exam on your first attempt.

What you'll learn

  • Switching
  • Authentication/Authorization
  • WLAN
  • Security
  • Network Resiliency and device virtualization
  • Managing and Monitoring

HPE7-A01

Lectures2
Questions78
Duration30 week
Students20,831

$20.00

Full Free Question Bank (78 Questions)

HPE7-A01: HPE Network Campus Access Professional (HPE7-A01) (HPE7-A01) Practice Questions & Verified Answers

Click any option to test your knowledge, or reveal the verified answer and detailed explanation below each question.

Jump to Section:
Question #1Part 1Switching

Refer to the exhibit. For Access-1, which MSTP setting must be configured identically to load-balance VLANs?

ASpanning-tree instance VLAN mapping
BSpanning-tree cist mapping
CSpanning-tree root-guard setting
DSpanning-tree bpdu-guard setting
Question #2Part 1Authentication/Authorization

Which network components use the RADIUS protocol to communicate for authentication and accounting?

Aan access point and the endpoint device
Ban endpoint device and a RADIUS authentication server
Ca Network Access Server and an endpoint device
Da Network Access Server and a RADIUS authentication server
Question #3Part 1WLAN

Refer to the image. A customer reports weak Wi-Fi coverage in their office and notes that the office across the hall has a much better signal. What is the most likely cause of this issue?

AThe AP only supports 5 GHz.
BThe AP only supports 2.4 GHz.
CThe AP is an outdoor access point.
DThe AP is using a directional antenna.
Question #4Part 1Security

Your Director of Security asks you to assign AOS-CX switch management roles to new employees according to their specific job requirements. After configuration was completed, it was observed that a user assigned the administrator’s role did not have the proper level of access on the switch. The user should have been limited to viewing nonsensitive configuration information, and a level of 1 should have been assigned to their role. Which default management role should have been assigned to the user?

Asysops
Bauditors
Cconfig
Doperators
Question #5Part 1WLAN

You are deploying a bonded 80 MHz-wide channel. Compared with an unbonded 20 MHz-wide channel, what difference in noise floor does a client using the bonded channel perceive?

A6dB
B3dB
C8dB
D4dB
Question #6Part 1Network Resiliency and device virtualization

A customer requires a network-hardware refresh to replace an aging 5406R core-switch pair that uses a spanning-tree configuration with CX 8360-32YC switches. What benefit does VSX clustering provide in the new solution?

Aa dual control plane provides better resiliency
Bdual HPE Aruba Networking AP LAN port connectivity for PoE redundancy
Cfaster MSTP converge processing
Dstacked data-plane
Question #7Part 1Authentication/Authorization

A manufacturing client is having installers deploy seventy headless scanners and fifty IP cameras in its warehouse. These new devices do not support 802.1X authentication. How can HPE Aruba Networking use MPSK to reduce the IT administration overhead associated with this deployment while maintaining a secure environment?

AUse MPSK Local to automatically provide unique pre-shared keys for devices.
BHave the installers generate keys with HPE Aruba Networking ClearPass Self Service Registration.
CPre-define the unique pre-shared keys in HPE Aruba Networking Central before deployment.
DMPSK Local will allow the cameras to share a key and the scanners to share a different key.
Question #8Part 1Network Resiliency and device virtualization

When configuring an AOS-CX VSX pair, which information does the Inter-Switch Protocol synchronize in the configuration that is created?

ARPVST+
BSVI
CUDLD
DMSTP
Question #9Part 1WLAN

A large retail customer wants to generate a rich set of contextual data from the location information of wireless clients in its stores. Which standard uses Round Trip Time (RTT) and Fine Time Measurements (FTM) to determine a client's distance from an AP?

A802.11l
B802.11k
C802.11mc
D802.11v
Question #10Part 1Security

Your Director of Security asks you to assign AOS-CX switch-management roles to new employees according to their specific job requirements. After configuration was completed, it was observed that a user assigned the administrators role did not have the appropriate switch access level. The user should have been restricted to viewing nonsensitive configuration information and assigned level 1 for their role. Which default management role should have been assigned to this user?

Aoperators
Bsysadmin
Cconfig
Dsysops
Question #11Part 1Security

Your manufacturing client is deploying two hundred wireless IP cameras and fifty headless scanners in its warehouse. These new devices do not support 802.1X authentication. How can HPE Aruba Networking enhance security for these new IP cameras in this environment?

AMPSK Local will allow the cameras to share a key and the scanners to share a different key.
BMPSK provides for each device in the WLAN to have its own unique pre-shared key.
CHPE Aruba Networking Central will derive the unique pre-shared keys when the devices are deployed.
DUse MPSK Local to automatically provide unique pre-shared keys for devices.
Question #12Part 1Security

Which SNMPv3-supported feature offers an advantage over SNMPv2c?

ACommunity strings
BGetBulk
CEncryption
DTransport mapping
Question #13Part 1Authentication/Authorization

A customer has asked you to assign a switch-management role to a new user. The customer requires that the user role can view nonsensitive switch configuration information and, for all resources other than \login and \logout, has only the REST API GET method. Which default AOS-CX user role satisfies these requirements?

Asysops
Bconfig
Csysadmin
Doperators
Question #14Part 1Security

A manufacturing client is deploying two hundred wireless IP cameras and fifty headless scanners in its warehouse. These new devices do not support 802.1X authentication. How can HPE Aruba Networking improve security for these new IP cameras in this environment?

AMPSK provides for each device in the WLAN to have its own unique pre-shared key.
BHPE Aruba Networking Central will derive the unique pre-shared keys when the devices are deployed.
CUse MPSK Local to automatically provide unique pre-shared keys for devices.
DHPE Aruba Networking ClearPass performs the 802.1x authentication and installs a certificate.
Question #15Part 1Switching

What does LLDP-MED enable?

AVoice VLANs can be automatically configured for VoIP phones.
BGVRP VLAN information can be used to dynamically add VLANs to a trunk.
CiSCSI client devices can set the required MTU setting for the port.
DiSCSI client devices can request to have flow control enabled.
Question #16Part 1Switching

You are configuring an SVI on an AOS-CX switch that must have these characteristics: - VLAN ID = 25 - IPv4 address 10.105.43.1 with mask 255.255.255.0 - IPv6 address fd00:5708:::f02d:4df6 with a 64 bit prefix length - Member of VRF eng - VRF eng and VLAN 25 have not yet been created Which command list satisfies the requirements using the fewest commands?

A![](https://cdn.examcademy.com/images/questions/1785603888878-bp2vab80.png)
B![](https://cdn.examcademy.com/images/questions/1785603890979-aynmvg5w.png)
C![](https://cdn.examcademy.com/images/questions/1785603893259-imwdk8h5.png)
D![](https://cdn.examcademy.com/images/questions/1785603895537-4nubywtz.png)
Question #17Part 1WLAN

In an AOS-10 architecture that uses an AP, a gateway, and traffic forwarding mode set tomixed, what occurs when a client connects to an open Enhanced SSID for which the VLAN assignment is bridged?

AAuthenticated Diffie-Hellman is not utilized
BThe gateway will not respond.
CNo encryption is applied.
DRADIUS protocol is utilized.
Question #18Part 1WLAN

A customer is experiencing Wi‑Fi 6 clients staying connected to poorly performing APs when less-utilized APs with better SNR are available. Which technology should you deploy?

AHPE Aruba Networking ClientMatch
BHPE Aruba Networking AirMatch
CHPE Aruba Networking Adaptive Radio Management
DHPE Aruba Networking ClearPass
Question #19Part 1WLAN

You are performing tests in your lab with the following equipment specifications: - AP1 has a radio that produces a 16 dBm signal. - AP2 has a radio that produces a 13 dBm signal. - AP1 has an antenna with an 8 dBi gain. - AP2 has an antenna with a 12 dBi gain. - The antenna cable for AP1 has a 4 dB loss. - The antenna cable for AP2 has a 3 dB loss. What is the calculated Equivalent Isotropic Radiated Power (EIRP) for AP1?

A40 dBm
B32 dBm
C15 dBm
D20 dBm
Question #20Part 1Switching

On a CX 8325, how do you configure IP address `10.10.10.1` for the interface in its default state for SVI 100 access and port `1/1/1`?

Aint vlan 100, ip address 10.10.10.1/24, int 1/1/1, switching, vlan access 100
Bint vlan 100, ip address 10.10.10.1/24, int 1/1/1 vlan access 100
Cint vlan 100, ip address 10.10.10.1/24, int 1/1/1, trunking, valn native 100
Dint vlan, ip address 10.10.10.1/24, int 1/1/1, no routing, vlan access 100
Question #21Part 1Managing and Monitoring

A customer uses stacked CX 6200 and CX 6300 switches for access, with a VSX pair of CX 8325 switches as a collapsed core. 802.1X is used for authentication. Because cabling is limited, some unmanaged switches remain in use. At times, devices behind those switches cause network outages. The switch must send a warning to the helpdesk when the issue occurs. You have been asked to implement an effective solution to this problem. What is the solution?

AConfigure loop protection on all edge ports of the CX 6200 and CX 6300 switchesSet up the trap-option
BConfigure loop guard on all edge ports of the CX 6200 and CX 6300 switchesSet up the trap-option
CConfigure spanning tree on the CX 8325 switchesSet the trap-option
DConfigure spanning tree on the CX 6200 and CX 6300 switchesNo trap option is needed
Question #22Part 1Connectivity

You are assisting an onsite network technician with bringing up an HPE Aruba Networking 9004 gateway through ZTP for a branch office. The technician was instructed to connect any port for the ZTP process to begin. Thirty minutes after the gateway was connected, new users began reporting that they could no longer access the internet. One affected user reported an IP address of `172.16.0.81`; however, the branch office network is intended to use `10.231.81.0/24`. What should the technician do to resolve the issue and start the ZTP process correctly?

AMove the cable on the gateway to G0/0/1, and add the device’s MAC and Serial number in HPE Aruba Networking Central.
BFactory default and reboot the gateway to restart the process.
CTurn off the DHCP scope on the gateway, and set DNS correctly on the gateway to reach HPE Aruba Networking Activate.
DMove the cable on the gateway from port G0/0/1 to port G0/0/0.
Question #23Part 1WLAN

You are performing tests in your lab with the following equipment specifications: - AP1 has a radio that produces a 17 dBm signal. - AP2 has a radio that produces a 9 dBm signal. - AP1 has an antenna with an 8 dBi gain. - AP2 has an antenna with a 12 dBi gain. - The antenna cable for AP1 has 2 dB of loss. - The antenna cable for AP2 has 3 dB of loss. What is the calculated Equivalent Isotropic Radiated Power (EIRP) for AP1?

A-2 dBm
B18 dBm
C2 dBm
D23 dBm
Question #24Part 1Routing

You need distinct routing-table requirements in a CX 6300 VSF configuration. Assuming the correct Layer 2 VLAN already exists, how would you create a new OSPF configuration for a separate routing table?

ACreate a new routing table, and attach OSPF process ID to it.
BCreate a new OSPF process ID with vrf name.
CAttach OSPF process ID in the VRF configuration.
DAttach a new OSPF process ID with a custom routing table.
Question #25Part 1Authentication/Authorization

A network administrator is troubleshooting issues that guest users encounter while connecting to and authenticating with the network. The access switches are AOS-CX switches. Which command should the administrator use to view information about the role assigned to a guest user?

Adiag-dump captiveportal client verbose
Bshow aaa authentication port-access interface all client-status
Cshow port-access captiveportal profile
Dshow port-access role
Question #26Part 1Switching

A customer uses a legacy application that communicates at Layer 2. The customer wants to keep the application operating to a remote site that is connected through Layer 3. All legacy devices connect to a dedicated CX 6200 switch at each site. Which technology on the CX 6200 can be used to satisfy this requirement?

AEthernet over IP (EoIP)
BStatic VXLAN
CGeneric Routing Encapsulation (GRE)
DInclusive Multicast Ethernet Tag (IMET)
Question #27Part 1Switching

On a CX 6000 48G switch with uplinks 1/1/47 and 1/1/48, what occurs when a client port detects a loop and thetx-disableparameter is used?

AThe ports that confirmed the loop are disabled.
BThe ports that transmitted and received the loop are disabled.
CThe port that transmitted the loop is disabled.
DThe port that received the loop is disabled.
Question #28Part 1Network Resiliency and device virtualization

You need distinct routing-table requirements in a CX 6300 VSF configuration. Assuming that the correct Layer-2 VLAN already exists, how would you create a new SVI for a separate routing table?

ACreate a new interface VLAN and attach vrf custom-vrf.
BCreate a new VLAN, and attach the routing table to it.
CCreate a new VLAN, and attach the VRF to it.
DCreate a new VRF. and add new SVIs under the configuration.
Question #29Part 1RoutingSelect 2

You are configuring Policy Based Routing (PBR) for a subnet that will test a new default route for the network. Traffic sourced from `10.2.250.0/24` must use a new default route through `10.1.1.253`. Other non-default routes for this subnet must remain unaffected by this change. Which two components are required for this solution? (Choose two.)

A![](https://cdn.examcademy.com/images/questions/1785603825121-6m3ychyy.png)
B![](https://cdn.examcademy.com/images/questions/1785603828715-99lk9w5p.png)
C![](https://cdn.examcademy.com/images/questions/1785603832895-hdkjn40g.png)
D![](https://cdn.examcademy.com/images/questions/1785603835014-ky3hv5fs.png)
E![](https://cdn.examcademy.com/images/questions/1785603838811-3k07j3wo.png)
Question #30Part 1Managing and Monitoring

Because of a shipping error, five (5) HPE Aruba Networking AP-515s and one (1) CX 6300 were delivered directly to your new branch office. You have configured a new group persona in HPE Aruba Networking Central for the new branch-office devices, but you do not know their MAC addresses or serial numbers. The office manager receives text-message instructions on their smartphone to onboard all the new hardware into Aruba Central. Which application must the office manager use on their phone to complete this task?

AHPE Aruba Networking Onboard App
BHPE Aruba Networking CX Mobile App
CHPE Aruba Networking Installer App
DHPE Aruba Networking Central App
Question #31Part 1Switching

For the CX 6400 switch, what does virtual output queueing (VOQ) provide that differs from most conventional campus switches?

Alarge egress packet buffers
Blarge ingress packet buffers
Cper port ASICs
DVSX
Question #32Part 1Managing and Monitoring

Which component does the HPE Aruba Networking Analytics Engine (NAE) use?

ALisp-based agents
BSwift-based scripts
CPython-based agents
DRuby-based scripts
Question #33Part 1Managing and Monitoring

Refer to the output from a CX6100 switch: ![Question Image](https://cdn.examcademy.com/images/questions/1783905684461-ruzcml7y.png) Which correct detail can be observed from the output above?

AThe dBm values for Tx are too far away from 0, and the link is down.
Bthe dBm values for Rx are within acceptable values, and the link is up.
CThe dBm values for Rx are too low, indicating that the link is down.
DThe dBm values for Tx are too high and affect Rx signals.
Question #34Part 1Switching

Which approach is the best practice for handling voice traffic with dynamic segmentation on AOS-CX switches?

ASwitch authentication and local forwarding of the voice traffic.
BCentral authentication and port-based tunneling of the voice traffic.
CSwitch authentication and user-based tunneling of the voice traffic.
DController authentication and port-based tunneling of all traffic.
Question #35Part 1WLAN

Refer to the exhibit. ![Question Image](https://cdn.examcademy.com/images/questions/1783906116399-51up1u32.png) A company with 1,471 employees has deployed 200 AP-635 access points. To use the 6 GHz band, the administrator has tried to configure a new WPA3-OWE SSID in HPE Aruba Networking Central, but it is not functioning as expected. What is the correct action to resolve the issue?

AChange the SSID to WPA3-Enhanced Open.
BChange the SSID to WPA3-Personal.
CChange the SSID to WPA3-Enterprise (CNSA).
DChange the SSID to WPA3-Enterprise (CCM).
Question #36Part 1Security

Using HPE Aruba Networking best practices, which feature should be enabled for visitor networks that need encryption but do not require authentication?

AWired Equivalent Privacy
BOpportunistic Wireless Encryption
COpen Authentication mode
DWi-Fi Protected Access 3 Personal
Question #37Part 1Managing and Monitoring

What is used to retrieve data that is stored in a Management Information Base (MIB)?

ALLDP-MED
BTLV
CSNMPv3
DSRTP
Question #38Part 1WLAN

What is the main benefit of BSS coloring?

ABSS color tags improve performance by allowing clients on the same channel to share airtime.
BBSS color tags are applied to Wi-Fi channels and can reduce the threshold for interference.
CBSS color tags are applied to client devices and can reduce the threshold for interference.
DBSS color tags are applied on the wireless controllers and can reduce the threshold for interference.
Question #39Part 1Routing

You need distinct routing-table requirements in a CX 6300 VSF configuration. Assuming the appropriate Layer-2 VLAN already exists, how would you create a new SVI for a separate routing table?

ACreate a new VLAN, and attach the routing table to it.
BCreate a new SVI and use attach vrf command.
CCreate a new VLAN, and attach the VRF to it.
DCreate a new routing table, and attach VLANs to it.
Question #40Part 1Routing

A CX 6300 VSF stack has an OSPF adjacency to a neighboring device through SVI 10 over LAG 1. The following configuration was created on the switch: ![Question Image](https://cdn.examcademy.com/images/questions/1785603826916-ulnm6w5u.png) What must be done to advertise the newly created networks through OSPF without creating new adjacencies?

A![](https://cdn.examcademy.com/images/questions/1785603830909-8isi3f86.png)
B![](https://cdn.examcademy.com/images/questions/1785603833012-64zyhb9o.png)
C![](https://cdn.examcademy.com/images/questions/1785603835529-n72oj90d.png)
D![](https://cdn.examcademy.com/images/questions/1785603838557-se5g1djq.png)
Question #41Part 1WLAN

You must ensure that the HPE Aruba Network being configured for a client can provide plug-and-play provisioning for access points. What enables this capability?

ASRTP
BLLDP-MED
CUCC Service
DCSMA
Question #42Part 1WLAN

What is the main benefit of BSS coloring?

ABSS color tags improve performance by allowing APs on the same channel to be farther apart.
BBSS color tags are applied to client devices and can reduce the threshold for interference.
CBSS color tags are applied on the wireless controllers and can reduce the threshold for interference.
DBSS color tags are applied to Wi-Fi channels and can reduce the threshold for interference.
Question #43Part 1Network Resiliency and device virtualization

The customer currently uses two (2) 5406 modular switches, configured with MSTP as their core switches. You are proposing a new solution. What would you explain about the AOS-CX VSX switch pair when the Primary VSX node is replaced and the system MAC is replaced?

AConfigure vMAC on the Primary VSX node under VSX to retain MAC after hardware replacement.
BDuring the initial VSX configuration, the system-mac is assigned with a fixed MAC based on VSX ID.
CVSX will select the MAC address from a node that is a higher ID.
DVSX will select the MAC address from a node that is the lower ID.
Question #44Part 1Troubleshooting

You are diagnosing an issue involving a pair of Aruba CX 8360 switches configured with VSX. Each switch contains multiple VRFs. You must determine the IP address of a specific client device whose MAC address is known. You run the `show arp` command on the primary switch of the pair, but no entry matches the client MAC address. The client device connects to a CX 6100 switch through a VSX LAG. Which action can successfully identify the IP address?

ARun the following command on the CX 6100 switch:show arp all-vrfs
BRun the following command on the VSX primary switch:show mac-address-table
CRun the following command on the VSX secondary switch:show arp summary
DRun the following command on the VSX primary switch:show arp all-vrfs
Question #45Part 1Network Resiliency and device virtualization

You are proposing new CX 8360 VSX switches to replace a customer’s current core switches. The customer is concerned about the possibility of a split-brain scenario between the VSX pair. How is the VSX pair affected when the ISL is down and keepalive is up?

AThe VSX pair is out-of-sync.
BThe VSX pair nodes are still forwarding traffic.
CThe VSX pair is not at risk.
DThe VSX LAGs are in a degraded state.
Question #46Part 1WLAN

Which standard, supported by certain HPE Aruba Networking APs, can allow a customer to accurately locate wireless client devices to within a few meters?

A802.11mc
B802.11ah
C802.11be
D802.11v
Question #47Part 1Security

A customer wants to enforce wired security as near to the source as possible. The wired security must satisfy these requirements: - Allow ping from the IT management VLAN to the user VLAN. - Deny ping originating from the user VLAN to the IT management VLAN. The customer uses CX 6300s. What is the correct way to implement these requirements?

AApply an outbound ACL on the user VLAN denying icmp echo traffic toward the IT management VLAN.
BApply an outbound ACL on the user VLAN allowing icmp echo-reply traffic toward the IT management VLAN.
CApply an inbound ACL on the user VLAN denying icmp echo traffic toward the IT management VLAN.
DApply an inbound ACL on the user VLAN allowing icmp echo-reply traffic toward the IT management VLAN.
Question #48Part 1Security

A company deployed Dynamic Segmentation using its CX switches and gateways. Following a security audit of its network, it found that the tunnels established between the CX switch and the HPE Aruba Networking gateway are not encrypted. The company is concerned that malicious actors could attempt to inject spoofed messages at the gateway to disrupt communications or obtain network information. Which action must the administrator take to address this situation?

AEnable Enhanced security
BEnable Secure Mode Enhanced
CEnable Enhanced PAPI security
DEnable GRE security
Question #49Part 1Network Resiliency and device virtualization

You must build a keepalive network between two CX 8325 switches for a VSX configuration. How should the keepalive connection be established?

Aloopback 0 and OSPF area 0 in default VRF
Brouted port in custom VRF
CSVI, VLAN trunk allowed all on ISL in default VRF
DSVI, VLAN trunk allowed on all ISL in custom VRF
Question #50Part 1Network Resiliency and device virtualization

You are proposing new CX 8360 VSX switches to replace a customer’s current core switches. The customer is concerned about the possibility of a split-brain condition between the VSX pair. How is the VSX pair affected if the keepalive connection is down but the ISL is operational?

AThe VSX pair is still in protected mode.
BThe VSX pair forwards traffic normally.
CThe VSX pair is not at risk.
DThe VSX pair uses only the primary node for traffic forwarding.
Question #51Part 1WLAN

A new network design is being evaluated to reduce client latency in a high-density environment. The design must achieve this by removing contention overhead through dedicating subcarriers to clients. Which technology is the best fit for this use case?

AChannel Bonding
BOFDMA
CWMM
DMU-MIMO
Question #52Part 1Authentication/Authorization

A customer asks you to assign a switch management role to a new user. The customer requires that the role allow the user to view nonsensitive switch configuration information and use only the REST API GET method for all resources other than \login and \logout. Which default AOS-CX user role satisfies these requirements?

Aoperators
Bconfig
Cadministrators
Dauditors
Question #53Part 1Network Resiliency and device virtualization

For AOS-10 Gateways, which device persona is available only when configuring a Gateway-only group?

AEdge
BBranch
CMobility
DVPN Concentrator
Question #54Part 1WLAN

A manufacturing client is deploying twenty headless scanners in its warehouse. The new devices do not support 802.1X authentication. When using MPSK Local, how does the gateway determine the device’s role and VLAN derivation rules?

AFrom the Type-Length-Value based on the Aruba-MPSK-Key-Name.
BIt pulls the device roles from HPE Aruba Networking Central during deployment.
CFrom the device’s Calling-Station-ID in the RADIUS Access-Request.
DFrom the MPSK roles defined in HPE Aruba Networking Central’s security dashboard.
Question #55Part 1TroubleshootingSelect 2

A network administrator is trying to troubleshoot a connectivity problem between a group of users and a specific server. The administrator must inspect packets over time from their desktop; however, they are not directly connected to the AOS-CX switch involved in the traffic flow. Which statements are correct about the ERSPAN session that must be configured on an AOS-CX switch? (Choose two.)

AOn the source AOS-CX switch, the destination specified is the switch to which the administrator’s desktop is connected.
BThe encapsulation protocol used is VXLAN.
COn the source AOS-CX switch, the destination specified is the administrator’s desktop.
DThe encapsulation protocol used is GRE.
EThe encapsulation protocol is UDP.
Question #56Part 1Connectivity

On a CX 6300 24G, how does a server DAC behave by default in interface 1/1/26?

APort in established in unsupported mode.
BPort remains disabled.
CPort requires allow-unsupported-transceiver to be enabled.
DPort will be enabled for 1/10/25G speeds.
Question #57Part 1Managing and MonitoringSelect 2

Which two statements about HPE Aruba Networking Network Analytics Engine (NAE) agents are true? (Choose two.)

AA single NAE agent can be used by multiple NAE scripts.
BA single NAE script can be used my multiple NAE agents.
CNAE scripts must be reviewed and signed by HPE Aruba Networking before being used.
DNAE agents will never consume more than 10% of switch processor resources.
ENAE agents are active at all times.
Question #58Part 1Managing and Monitoring

Which component does the HPE Aruba Networking Network Analytics Engine (NAE) use?

ACurrent State Database
BPostgreSQL Database
CJSON-based scripts
DPerl-based agents
Question #59Part 1Network Resiliency and device virtualization

You are proposing new CX 8360 VSX switches to replace a customer’s current core switches. The customer is concerned about the potential for a split-brain scenario between the VSX pair. How is the VSX pair affected if both the ISL and keepalive are down?

AThe VSX node with lower system-id continues forwarding.
BBoth VSX nodes will automatically reboot and keep LAG interfaces shutdown.
CBoth VSX nodes will still forward traffic.
DThe VSX node with higher uptime continues forwarding.
Question #60Part 1WLANSelect 2

Which requirements ensure that WMM operates effectively? (Choose two.)

AAll APs need to be from the AP-5xx series and AP-6xx series which are Wi-Fi CERTIFIED 6.
BThe AP needs to be connected via a tagged VLAN to the wired port.
CThe Client must be Wi-Fi CERTIFIED for WMM and configured for WMM marking.
DThe APs and the controller are Wi-Fi CERTIFIED for WMM, which is enabled.
EThe AOS-10 APs installed have to be converted to controlled mode.
Question #61Part 2WLAN

How is Dynamic Multicast Optimization (DMO) configured in an HPE Aruba Networking wireless network?

ADMO is configured globally for each SSID in use in the network.
BDMO is configured individually for each SSID in use in the network.
CThe controller converts multicast streams into unicast streams.
DThe AP uses QoS to provide equal air time for multicast traffic.
Question #62Part 2Authentication/Authorization

On a CX switch, how would you use loopback 1 as the primary interface for the RADIUS protocol?

ASet radius-group with ip source loopback 1.
BConfigure radius servers with interface loopback 1.
CUse loopback 1 with radius-destination.
DDefine loopback 1 with source-interface.
Question #63Part 2Switching

How can you allow the new VLAN 100 between the VSX pair on inter-switch link 256 for ports 1/45 and 2/45?

Avlan trunk add 100 in LAG256
Bvlan trunk allowed 100 in LAG256
Cvlan trunk allowed all in LAG256
Dvlan trunk allowed 100 for ports 1/45 and 1/46
Question #64Part 2WLAN

Refer to the image. A customer complains of weak Wi-Fi coverage in their office. They state that the office across the hall receives a much stronger signal. What is the likely cause of this issue?

AThe AP is using an internal antenna.
BThe AP is using an omni-directional antenna.
CThe AP is using an external antenna.
DThe AP is using a directional antenna.
Question #65Part 2WLAN

You are deploying a bonded 80 MHz-wide channel. How does the noise floor perceived by a client using this bonded channel differ from that of an unbonded 20 MHz-wide channel?

A4dB
B3dB
C2dB
D6dB
Question #66Part 2WLAN

Refer to the image. Your customer reports weak Wi-Fi coverage in their office. They state that the office across the hall has a much stronger signal. What is the most likely cause of this issue?

AThe AP is using an omni-directional antenna.
BThe AP only supports 5 GHz.
CThe AP is a remote access point.
DThe AP is using a directional antenna.
Question #67Part 2Routing

What are two benefits of dividing a larger OSPF area into several smaller areas?

AIt reduces the total number of LSAs.
BIt simplifies the configuration.
CIt extends the LSDB.
DIt increases stability.
EIt reduces processing overhead.
Question #68Part 2Authentication/Authorization

A customer asks you to assign a switch-management role to a new user. The customer requires that the user role have access only to the Web UI **System > Log** page and only to the `GET` method of the REST API for the `/logs/event` resource. Which default AOS-CX user role meets these requirements?

Aoperators
Badministrators
Cauditors
Dsysops
Question #69Part 2Managing and Monitoring

On a CX switch, how can loopback 0 be used as the primary interface for the sFlow protocol?

ASet sflow collector server with interface loopback 0.
BConfigure sflow server group ip source with loopback 0.
CUse loopback 0 with sflow-destination.
DDefine loopback 0 with source-interface.
Question #70Part 2Authentication/Authorization

Your customer wants to learn more about how roles help maintain consistent policy enforcement in a distributed overlay fabric. How would you explain this concept to them?

ARole-based policies are tied to IP addresses which have an advantage over IP-based policies and role names are sent between VTEPs.
BRole-based policies enhance User Based Tunneling across the campus network and the policy traffic is protected with IPsec.
CGroup Based Policy ID is applied on ingress VTEP after device authentication and policy is enforced on egress VTEP.
DGroup Based Policy ID is applied on egress VTEP after device authentication and policy is enforced on ingress VTEP.
Question #71Part 2Routing

What is an OSPF transit network?

Aa network that uses tunnels to connect two areas
Ba network that connects to a different routing protocol
Ca special network that connects two different areas
Da network on which a router discovers at least one neighbor
Question #72Part 2Network Resiliency and device virtualization

A customer uses a legacy application that communicates at Layer 2. The customer wants to keep the application operational across a campus connected through Layer 3. Legacy devices connect to CX 6300 switches throughout the campus. Which technology minimizes flooding so that the legacy application can operate efficiently?

AEthernet over IP (EoIP)
BGeneric Routing Encapsulation (GRE)
CStatic VXLAN
DEVPN-VXLAN
Question #73Part 2Authentication/Authorization

A customer wants to enable wired authentication throughout all of its CX switches. One requirement is that the switch must be able to authenticate a single computer connected through a VoIP phone. Which feature must be enabled to meet this requirement?

ADevice-Based Mode
BMulti-Domain Authentication
CMulti-Auth Mode
DMAC Authentication
Question #74Part 2WLAN

A large retail customer wants to generate a rich set of contextual data from the location information of wireless clients in its stores. Which standard uses Round Trip Time (RTT) and Fine Time Measurements (FTM) to calculate a client's distance from an AP?

A802.11i
B802.11w
C802.11mc
D802.11k
Question #75Part 2Authentication/AuthorizationSelect 2

A network engineer has recently found that a wired device attached to a CX switch is behaving improperly on the network. To resolve the problem, a new HPE Aruba Networking ClearPass policy has been implemented to stop the device from reconnecting to the network. Which two actions must be implemented so ClearPass can perform a CoA and change access for this wired device? (Choose two.)

AConfirm that NTP is configured on the switch and ClearPass.
BUse Dynamic Segmentation.
CBounce the switchport.
DConfigure dynamic authorization on the switchport.
EConfigure dynamic authorization on the switch.
Question #76Part 2Performance Optimization

You need to ensure that voice traffic sent through an AOS-CX arrives with the lowest possible latency. What is the best scheduling mechanism for this task?

ARate limiting
BQoS shaping
CStrict scheduling
DDWRR scheduling
Question #77Part 2Network Resiliency and device virtualization

Which feature enables the device to stay operational when a remote link fails between a Gateway cluster and a RADIUS server located either in the cloud or in a datacenter?

AMAC Authentication
BAuthentication survivability
CMAC caching
DOpportunistic key caching
Question #78Part 2WLAN

How is Multicast Transmission Optimization implemented in an HPE Aruba Networking wireless network?

AWhen this option is enabled the minimum default rate for multicast traffic is set to 12 Mbps for 5 GHz.
BThe optimal rate for sending multicast frames is based on the lowest unicast rate across all associated clients.
CThe optimal rate for sending multicast frames is based on the highest broadcast rate across all associated clients.
DThe optimal rate for sending multicast frames is based on the lowest broadcast rate across all associated clients.

📢 Unlock Full Access to Success!

"The content displayed here is a promotional preview and contains only 50% of the actual exam database. To access the complete set of updated questions, please upgrade to the Full Version."

👉 Click the button and follow the instructions to secure your full access immediately!