Welcome to awslagi.com – Sharing AWS, Google Cloud, Microsoft Azure IT Exams. It's free for all!

HPE6-A85: HPE Network Campus Access Associate Exam

Master the HP / HPE HPE Network Campus Access Associate Exam (HPE6-A85) certification exam with 85 realistic practice questions covering Connectivity, WLAN, Security, Performance Optimization.

4.8★★★★★(158 ratings)
17,562 studentsIntermediate
Prepare for the HP / HPE HPE Network Campus Access Associate Exam (HPE6-A85) certification with scenario-based practice questions modeled on real exam objectives. You will build practical confidence across key domains including Connectivity, WLAN, Security, Performance Optimization. Each question includes structured answer options and hint answers to help you identify knowledge gaps quickly, reinforce core HP / HPE concepts, and pass the HPE6-A85 exam on your first attempt.

What you'll learn

  • Connectivity
  • WLAN
  • Security
  • Performance Optimization
  • Switching
  • Network Stack

HPE6-A85

Lectures2
Questions85
Duration30 week
Students17,562

$20.00

Full Free Question Bank (85 Questions)

HPE6-A85: HPE Network Campus Access Associate Exam (HPE6-A85) Practice Questions & Verified Answers

Click any option to test your knowledge, or reveal the verified answer and detailed explanation below each question.

Jump to Section:
Question #1Part 1Connectivity

Which fiber connector is used most commonly for AOS-CX switches?

ASC
BLC/APC
CLC
DST
Question #2Part 1WLAN

How is Equivalent Isotropic Radiated Power (EIRP) computed?

A(power provided by PoE port) – (the cable loss) + (antenna gain)
B(power provided by the radio) – (the cable loss) + (antenna gain)
C(power provided by the radio) – (the cable loss) – (antenna gain)
D(power provided by PoE port) – (the cable loss) – (antenna gain)
Question #3Part 1Security

Which component of the WPA Key Hierarchy is used to encrypt and/or decrypt data?

AKey Confirmation Key (KCK)
BPairwise Temporal Key (PTK)
Cnumber used once (nonce)
DPairwise Master Key (PMK)
Question #4Part 1Performance Optimization

An AP signal strength of 0.0000001 milliwatts is equal to how many dBm?

A–70 dBm
B–60 dBm
C–90 dBm
D–80 dBm
Question #5Part 1WLAN

Which HPE Aruba Networking technology delivers load balancing across radio bands and AP radios?

AHPE Aruba Networking ESP
BHPE Aruba Networking ClientMatch
CHPE Aruba Networking AirWave
DHPE Aruba Networking Central
Question #6Part 1Switching

Which protocol can an AOS-CX switch transmit to provision DSCP and PoE settings to a connected VoIP phone?

ACDP
BLLDP
CLLDP-MED
DLACP
Question #7Part 1WLAN

Which two features characterize HPE Aruba Networking ClientMatch?

AIt helps to move sticky clients to another AP.
BIt is used to locate a client.
CIt is an HPE Aruba Networking patented technology.
DAn algorithm to adjust RF patterns
EIt optimizes channels of an AP.
Question #8Part 1Network Stack

Which address is used by Layer 2 for link-layer addressing?

AIP Address
BManagement Address
CLogical Address
DMAC Address
Question #9Part 1Security

When configuring an AOS firewall role, where can you configure the client’s broadcast domain?

AAccess Control Rules
BWLAN Settings
CRole-based VLAN override
DBandwidth Controls
Question #10Part 1WLAN

Which network advantages result from configuring fewer SSIDs on each radio?

AIt is much less configuration effort.
BThe WLAN throughput will increase.
CA longer beacon-interval helps to make the Wi-Fi connections more stable.
DThe number of beacons will be reduced.
EEach SSID consumes one AP license.
Question #11Part 1WLAN

Which logical construct enables a WLAN to use disparate and geographically dispersed network infrastructure through a common set of services?

AWireless distribution system
BUnderlay network
CBasic Service Set
DOverlay network
Question #12Part 1Routing

When using OSPF dynamic routing on an AOS-CX switch, which setting must match between neighboring devices for them to exchange routes?

AOSPF network type
BOSPF process id
COSPF passive configuration
DOSPF router id
Question #13Part 1Network Stack

Describe what functionality ARP provides.

AARP uses multicast to build the ARP table.
BARP maps MAC addresses to switch ports.
CClients do not have an ARP cache and always ask for the default gateway
DARP maps layer-3 IP addresses to layer-2 MAC addresses.
Question #14Part 1Network Stack

Which layer preserves unique logical source and destination addresses over the entire path between endpoints?

ALayer 5 – Session Layer
BLayer 4 – Transport Layer
CLayer 3 – Network
DLayer 2 – Data Link Layer
Question #15Part 1Network Resiliency and virtualization

You need to create a virtual stack using CX 8400. Choose the correct statement for this scenario with compatible cabling for the VSX ISL.

ASFP28 7m DAC
BSFP56 3m DAC
CQSFP28 3m DAC
DSFP 5m DAC
Question #16Part 1WLAN

What does a wireless client dofirstwhen its countdown timer reaches zero and it obtains a Transmit Opportunity (TXOP)?

AIt sends a reassociation request frame to the AP and sends its Data Frames.
BIt immediately sends its Data Frames and receives an ACK from the AP.
CIt sends a CTS-to-self announcement to the AP and all other clients.
DIt sends a CTS-to-self announcement to the ESP gateway.
Question #17Part 1Management and Monitoring

Which device type and group persona are needed to manage a Microbranch environment?

AAOS-8 Branch Gateway Group Persona
BAOS-10 AP Group Persona
CAOS-10 Branch Gateway Group Persona
DAOS-8 AP Group Persona
Question #18Part 1WLAN

Which device in a WLAN is ultimately responsible for deciding to roam to a new AP?

AThe client device
BThe network gateway
CThe wireless controller
DThe access point
Question #19Part 1Switching

Which command can be used to verify that all four 10G links in an LACP-LAG are operating correctly?

Ashow interface lag verbose
Bshow interface lag brief
Cshow lacp
Dshow link-aggregation summary
Question #20Part 1Network Resiliency and virtualization

You are meeting with a customer and are asked to explain the VRRP network-redundancy feature. Which statement about this feature is correct?

Apreempt feature is disabled by default on default VRF
Bpreempt feature improves VRRP failover time for VIDs
Cpreempt feature will resume VRRP primary role on master after a recovery
Dpreempt feature will retain VRRP primary role on standby after a recovery
Question #21Part 1Network Stack

What is the broadcast address of the 10.0.1.0/30 network?

A10.0.1.0
B10.0.1.255
C10.0.1.1
D10.0.1.3
Question #22Part 1Performance Optimization

You must ensure that voice traffic traversing an AOS-CX switch arrives with minimal latency. Which scheduling technology is best for this task?

AQoS shaping
BRate limiting
CStrict queuing
DDWRR queuing
Question #23Part 1Troubleshooting

You have been asked to troubleshoot failed connectivity between a local subnet at the HQ Office, with 490 employees, and a remote subnet at the Branch Office. PC1 cannot ping PC2. Use the provided topology and `show` command output to determine the reason for the failure. ![Question Image](https://cdn.examcademy.com/images/questions/1784704313256-q96qevr6.png) ![Question Image](https://cdn.examcademy.com/images/questions/1784704315664-mdzymxbf.png) ![Question Image](https://cdn.examcademy.com/images/questions/1784704318042-42vp4a0n.png) ![Question Image](https://cdn.examcademy.com/images/questions/1784704320663-bt53s16d.png) ![Question Image](https://cdn.examcademy.com/images/questions/1784704323302-8jpk02cz.png)

AOn Branch Office-L3-SW-2-There is no Layer 3 SVI configured in the correct subnet.
BOn Branch Office-L3-SW-2-The switch does not have a static route to the HQ Office Local Subnet.
COn HQ Office L3-SW-1-The switch does not have a static default route to the internet.
DOn HQ OfficeL3-SW-1-There is no route to the Branch Office.
Question #24Part 1Authentication/AuthorizationSelect 2

Which statements describe HPE Aruba Networking ClearPass OnGuard Software? (Choose two.)

AOnGuard is doing posture checks on client systems.
BIt is used for the self-registration of guest devices.
COnGuard is an agent, running on client systems.
DOnGuard assigns a unique identity to each device.D. It is an intuitive portal for users to securely configure their devices.
Question #25Part 1WLAN

Which statement regarding 20 MHz and 40 MHz Wi-Fi channels is accurate?

A20 MHz channels have the same signal-to-noise ratio as 40 MHz channels but offer lower single-client connection speeds.
B20 MHz channels have a higher signal-to-noise ratio than 40 MHz channels but allow lower single-client connection speeds.
C20 MHz channels have the same signal-to-noise ratio as 40 MHz channels and allow the same single-client connection speeds.
D20 MHz channels have a higher signal-to-noise ratio than 40 MHz channels and allow the same single-client connection speeds.
Question #26Part 1Authentication/Authorization

A network technician has successfully connected to the employee SSID using 802.1X. Which RADIUS message should you look for to confirm a successful connection?

AAuthenticated
BSuccess
CAccess-Accept
DAuthorized
Question #27Part 1Authentication/Authorization

Which EAP method supports “chaining” machine and user authentication with tokens?

AEAP-TEAP
BEAP-TTLS
CEAP-TLS
DPEAP
Question #28Part 1WLAN

What is the preferred mounting location for a typical HPE Aruba Networking indoor AP?

AHorizontal, below a suspended celling
BVertical, at a wall
CHorizontal, above a suspended celling
DUnder an office desk
Question #29Part 1Authentication/Authorization

At what point does the 802.1X authentication process start when connecting to a secured wired Ethernet network?

AAfter firewall policies are applied
BWhen the connection is established
CAfter captive portal authentication
DWhen the Pairwise Master Key is received
Question #30Part 1Management and Monitoring

Which statement concerning ZTP switch provisioning with HPE Aruba Networking Central is accurate?

AZTP requires DHCP but does not require DNS.
BZTP does not require DHCP but does require DNS.
CZTP does not require DHCP and DNS.
DZTP requires DHCP and DNS.
Question #31Part 1Network Resiliency and virtualization

Switch A has a priority of 80 and IP address10.10.10.2/24. Switch B has a priority of 80 and IP address10.10.10.3/24. Both switches are configured with VRRP and VID10.10.10.1. Which switch becomes the master during normal operation?

ASwitch B is the master.
BBoth switches are masters until one switch fails.
CSwitch A is the master.
DThe configuration is invalid. VRRP will not work when two switches have the same priority.
Question #32Part 1Security

Why is WPA3-Personal authentication a more secure choice than WPA2-PSK authentication?

AThe client TPM module generates a unique encryption key for each attempted connection.
BSimultaneous Authentication of ‘Equals’ is used to generate a fresh Pairwise Master Key for each attempted connection.
CWPA3 requires longer, more secure passphrases.
DWPA3 encrypts authentication traffic using TLS.
Question #33Part 1Troubleshooting

You need to troubleshoot a CX 6100 switch that does not boot correctly. Select the option that lets you access the switch and view the boot options available for OS images and ServiceOS.

AUSB-Cconsole port
BVSF member USB-C console port
CUSB-A console port
DVSF conductor mgmt port using SSH
Question #34Part 1Management and Monitoring

Refer to the exhibit. Which server will receive the least amount of data?

A172.17.17.43
B192.168.0.56
C10.99.26.25
D10.100.100.25
Question #35Part 1Switching

Refer to the exhibit. Based on the topology shown, which configuration would be valid on Switch 1 port 1/1/2 to allow traffic to PC3 if an unmanaged switch is connected between PC3 and Switch 1?

Aint 1/1/2, trunk allowed vlan 20
Bint 1/1/2, vlan native 20
Cint 1/1/2, vlan access 20
Dint 1/1/2, untagged vlan 20
Question #36Part 1Troubleshooting

You must troubleshoot a CX 6200 4-node VSF stack switch that does not boot properly. Select the option that lets you access the switch and view the boot options for OS images and ServiceOS.

AConductor mgmt port using SSH
BMember 2 RJ-45 console port
CConductor USB-C console port
DMember 2 switch mgmt port
Question #37Part 1Routing

Describe the purpose of administrative distance.

AThe higher administrative distance is preferred.
BThe administrative distance is used as a trust rating for route entries.
CThe administrative distance for a static route is 10.
DRoutes learned via external BGP have a higher administrative distance than routes learned via OSPF.
Question #38Part 1Switching

What does the “ALFOE” status indicate when you check LACP by usingshow lacp interfaces?

ALACP is working with no problems.
BLACP is not configured on the peer side.
CLACP is a synchronizing process.
DThe interface on the local switch is configured as static-LAG.
Question #39Part 1Management and Monitoring

What does a solid amber radio status LED on an HPE Aruba Networking AP indicate?

AThe radio is working the 5 GHz band only.
BThe radio is enabled in monitor or spectrum analysis mode.
CThe radio is working in mesh mode.
DNot enough PoE provided from the switch to power both radios of the AP.
Question #40Part 1Switching

A customer needs two CX 6200F 48G switches connected to one another across a distance of 80 m/252 ft between wiring closets. The switches must retain capacity for VSF expansion with ring topology in each cabinet. What is a valid configuration for a redundant link-aggregation port?

APorts 1/1/1 and 1/1/2 for LAG
BPorts 1/1/49 and 1/1/50 with SFP28 for LAG
CPorts 1/1/51 and 1/1/52 with SFP+ for LAG
DPorts 1/1/47 and 1/1/48 for LAG
Question #41Part 1WLAN

When using an Aruba standalone AP, you selectNative VLANfor Client VLAN Assignment. In which subnet will the client IP addresses reside?

AThe same subnet as the mobility conductor
BThe same subnet as the HPE Aruba Networking ESP gateway
CThe same subnet as the mobility controller
DThe same subnet as the access point
Question #42Part 1Network Resiliency and virtualization

During live firmware upgrades of HPE Aruba Networking APs, which technology divides all APs according to RF-neighborhood data to minimize the impact on clients?

AHPE Aruba Networking AI Insights
BHPE Aruba Networking ESP
CHPE Aruba Networking ClientMatch
DHPE Aruba Networking AirMatch
Question #43Part 1Network Resiliency and virtualization

Which characteristics describe VSF?

AVSF helps to simplify the network design by reducing the number of logical devices.
BVSF forms virtual device by using proprietary stacking cables.
CVSF-Stacks are limited to 7 members.
DVSF forms a virtual device by using standard 10 Gbps/25 Gbps/50 Gbps ports.
EVSF-Stacks are primarily used at the core layer.
Question #44Part 1WLAN

When would you bond multiple 20 MHz-wide 802.11 channels?

ATo decrease the Signal to Noise Ratio (SNR)
BTo provision highly available AP groups
CTo increase throughput between the client and AP
DTo utilize high gain omni-directional antennas
Question #45Part 1Routing

When the OSFP dynamic routing protocol is used on an AOS-CX switch, what must match on neighboring devices for routes to be exchanged?

AOSPF passive configuration
BOSPF area
Crouter-id
Dloopback configuration
Question #46Part 1WLAN

What are the primary characteristics of the 6 GHz band?

ALess RF signal is absorb by objects in a 6 GHz WLAN.
BIn North America, the 6 GHz band offers more 80 MHz channels than there are 40 MHz channels in the 5 GHz band.
CLow Power Devices are allowed for indoor and outdoor usage.
DThe 6 GHz band is fully backward compatible with the existing bands.
Question #47Part 1WLAN

Which HPE Aruba Networking technology enables device-specific passphrases to securely onboard legacy devices onto the WLAN?

AOpportunistic Wireless Encryption (OWE)
BMultiple Pre-Shared Key (MPSK)
CWired Equivalent Privacy (WEP)
DTemporal Key Integrity Protocol (TKIP)
Question #48Part 1Routing

Based on theshow ip routeoutput on a CX 8325, what route type is10.20.0.0/22,vrf default via 10.1.1.1, [110/200]?

Astatic
Blocal
COSPF
Dconnected
Question #49Part 1Network Resiliency and virtualization

You are meeting with a customer and are asked to explain the VRRP network-redundancy feature. Which statement about this feature is correct?

Aprovides HPE Aruba Networking-proprietary IP gateway redundancy
Bprovides standards-based IP gateway redundancy
Cdefault VRF needs to be enabled on AOS-CX switches
Drequires three members to operate for full gateway redundancy
Question #50Part 1Troubleshooting

What is indicated by a Stack-LED that flashes amber slowly?

AA port has a stacking failure. Stacking mode is not selected.
BOne switch has a stacking failure.
CStacking mode selected.
DStacking is synchronizing. Please wait.
Question #51Part 1Routing

On an AOS-CX, which command correctly adds a static route to the Class C network10.2.10.0through a gateway of172.16.1.1?

Aip route 10.2.10.0/24 172.16.1.1
Bip route-static 10.2.10.0 255.255.255.0 172.16.1.1
Cip-route 10.2.10.0/24 172.16.1.1
Dip route 10.2.10.0.255.255.255.0 172.16.1.1 description aruba
Question #52Part 1WLAN

You must configure wireless access for several classes of IoT devices, some of which support only 802.11b. Each class needs a unique PSK and a different security policy applied as a role. There will be 15–20 distinct device classes, and performance must be optimized. Which option meets these requirements?

ASingle SSID with MPSK for each IoT class, using 2.4GHz and 5 GHz bands
BIndividual SSIDs with unique PSK for each IoT class, using 2.4GHZ and 5 GHz band
CSingle SSID with MPSK for each IoT class, using 5 GHz and 6 GHz bands
DIndividual SSID with unique PSK for each IoT class, using 5 GHz and 6 GHz bands
Question #53Part 1Switching

What can you do to dynamically set the PoE priority on a switch port when deploying IP cameras, APs, and other PoE devices?

AEnable Quick PoE on the switch modules.
BEnable profiling for device provisioning.
CConfigure PoE power management to Class-based Mode.
DConfigure PoE power management to Dynamic Mode.
Question #54Part 1Security

Which key-management option is the most secure?

ADynamic WEP
BWPA
CWPA3
DWPA2
Question #55Part 1Security

Which certificate in the server’s chain of trust is self-signed?

ASubordinate CA certificate
BRoot CA certificate
CIssuing CA certificate
DIntermediate CA certificate
Question #56Part 1Management and Monitoring

Which statement regarding manual switch provisioning with HPE Aruba Networking Central is accurate?

AManual provisioning does not require DHCP and requires DNS.
BManual provisioning requires DHCP and requires DNS.
CManual provisioning does not require DHCP and does not require DNS.
DManual provisioning requires DHCP and does not require DNS.
Question #57Part 1Troubleshooting

A network technician is troubleshooting a new AP at a branch office that is not receiving its configuration from HPE Aruba Networking Central. The other APs at the branch are functioning as expected. The output of the `show ap debug cloud-server` command shows that “cloud config received” is FALSE. After confirming that the new AP has Internet access, what should be checked next?

AVerify the AP has a license assigned.
BDisable and enable HPE Aruba Networking Central to trigger configuration refresh.
CVerify the AP can ping the device on arubanetworks.com.
DDisable and enable activate to trigger provisioning refresh.
Question #58Part 1Network Resiliency and virtualization

Refer to the exhibit. ![Question Image](https://cdn.examcademy.com/images/questions/1785125878733-gfmvkmpj.png) In this topology, two CX 8325 switches form a VSX stack using the active gateway. What is the nature and behavior of the Virtual IP for the VSX pair when clients connect to the access switch and use VSX as their default gateway?

AVirtual floating IP will failover in case of a failure
BVirtual IP is active on both CX switches
CVirtual IP uses SVI IP address synced with VSX
DVirtual IP is active on the primary VSX switch
Question #59Part 1Network Stack

Which Protocol Data Unit (PDU) corresponds to the data link layer PDU?

APDU3 - Packet
BPDU4 - Segment
CPDU2 - Frame
DPDU1 - Signal
Question #60Part 1WLAN

Which feature can network administrators use to centralize RF planning and optimization services when using an HPE Aruba Networking Mobility Conductor architecture?

AAirWave
BClient Match
CClient Wave
DAirMatch
Question #61Part 2Performance Optimization

When measuring signal strength, dBm is commonly used, and 0 dBm represents 1 mW of power. What does -20 dBm represent?

A.01 mW
B1 mW
C.1 mV
D10 mW
Question #62Part 2Security

What is one benefit of using Layer 2 MAC authentication?

AMAC identifiers are hard to spoof.
BNo setup is required on the client.
CIt matches user names to MAC address.
DMAC allow lists are easily maintained over time.
Question #63Part 2Switching

Which statement is correct for a device whose MAC address is BB-31-B5-80-41-4F?

AThe device OUI is BB-31-B5 and the device NIC serial number is 80-41-4F
BThe device OUI is B8-31 and the device NIC serial number is B5-80-41-4F
CThe device OUI is B8-31-B5 and the device serial number is MD 5 hash is 80-41-4F
DThe device OUI is 80-41-4F and the device NIC serial number is B8-31-B5
Question #64Part 2WLAN

Where are wireless-client roaming decisions made?

AHPE Aruba Networking Central
BJoint decision made by the origination and destination APs
CClient device
DVirtual Controller
Question #65Part 2Switching

Which HPE Aruba Networking access-switch model is ideal for cost-effectively connecting200–380clients, printers, and APs per distribution rack?

ACX 6000
BCX 6200
CCX 6300
DCX 6400
Question #66Part 2Management and Monitoring

Which device configuration group types can a user define in HPE Aruba Networking Central when creating a group?

AESP group
BUI group
CTemplate group
DDefault group
Question #67Part 2Authentication/Authorization

The customer needs to create authorization policies for users with Windows 10 clients and must authorize both device and user credentials within a single RADIUS session. Which solution correctly meets this requirement?

AHPE Aruba Networking ClearPass 6.9 with EAP-TLS
BHPE Aruba Networking ClearPass 6.9 with EAP-TTLS
CHPE Aruba Networking ClearPass 6.9 with PEAP
DHPE Aruba Networking ClearPass 6.9 with EAP-TEAP
Question #68Part 2Management and Monitoring

When using HPE Aruba Networking Central, which feature identifies recommended actions for resolving network health issues and lets you share detailed information with support personnel?

AAudit Trail
BAlerts and Events
CAIOps
DOverview Dashboard
Question #69Part 2Troubleshooting

A network technician uses HPE Aruba Networking Central to troubleshoot network issues. Which dashboard can be used to view and acknowledge issues at the start of the troubleshooting process?

Athe Alerts and Events dashboard
Bthe Audit Trail dashboard
Cthe Reports dashboard
Dthe Tools dashboard
Question #70Part 2Network Resiliency and virtualization

What are two benefits of a UXI?

AA UXI can check different applications, such as HTTP, VOIP, or Office 365.
BA UXI helps to calculate the best WiFi channels in a remote location.
CA UXI behaves like a client/user.
DA UXI measures the Wi-Fi coverage of all APs in the given location.
EA UXI can be used without any internet connection.
Question #71Part 2Routing

Which Layer 3 IPv4 packet-header field helps mitigate Layer 3 routing loops?

AChecksum
BProtocol
CTime To Live
DDestination IP
Question #72Part 2WLAN

What occurs when an AP’s signal weakens because it is absorbed while traveling through an object?

AHPE Aruba Networking Central dynamically moves clients to neighboring APs.
BSignal to Noise Ratio (SNR) decreases.
CSignal to Noise Ratio (SNR) increases.
DAPs will use bonded channels to decrease latency to clients.
Question #73Part 2Switching

You need to discard excessive broadcast traffic entering an AOS-CX switch. Which technology is best suited to this task?

ADWRR queuing
BStrict queuing
CRate limiting
DQoS shaping
Question #74Part 2Performance Optimization

The noise floor is measured at .000000001 milliwatts, and the receiver’s signal strength is -65dBm. What is the Signal to Noise Ratio?

A45 dBm
B25 dBm
C15 dBm
D35 dBm
Question #75Part 2Routing

Which command is used to configure a default route to `10.4.5.1` on an AOS-CX switch when in-band management via an SVI is in use?

Aip route 0.0.0.0/0 10.4.5.1 vrf mgmt
Bdefault-gateway 10.4.5.1
Cip route 0.0.0.0/0 10.4.5.1
Dip default-gateway 10.4.5.1
Question #76Part 2Routing

You are configuring a network with a stacked pair of CX 6300M switches for distribution and Layer 3 services. You create a new user VLAN that will be used on multiple downstream CX 6200 access-switch stacks connected to the distribution stack. You will create multiple similar VLANs/subnets that will be used across multiple access stacks. What is the correct way to configure the routable interface for the subnet associated with this VLAN?

ACreate an SVI in the subnet on each downstream switch.
BCreate an SVI in the subnet on the CX 6300M stack.
CCreate an SVI in the subnet on the CX 6300M stack, and assign the management address of each downstream switch stack to a different IP address in the same subnet.
DCreate a physically routed interface in the subnet on the CX 6300M stack for each downstream switch.
Question #77Part 2WLAN

What does WPA3-Personal use as the source for generating a different Pairwise Master Key (PMK) whenever a station connects to the wireless network?

ASession-specific information (MACs and nonces)
BOpportunistic Wireless Encryption (OWE)
CSimultaneous Authentication of Equals (SAE)
DKey Encryption Key (KEK)
Question #78Part 2Switching

A hospital relies on extensive mobile equipment to diagnose patients and document patient data. Which access switch is ideal for this large hospital, whose distribution racks have more than 400 ports in a single VSF stack?

ACX 6400
BCX 6100
CCX 6300
DCX 6200
Question #79Part 2Network Resiliency and virtualization

Which VSF topologies are recommended?

AFull mesh plus MAD
BFull mesh
CStar
DRing
EDaisy chain plus MAD
Question #80Part 2Authentication/Authorization

A customer with 1,860 employees has just deployed user and device certificates through a company-wide Group Policy Object (GPO). When authenticating to the network, which EAP method chains user and machine authentication in a single RADIUS session?

AEAP-TEAP
BEAP-TTLS
CEAP-TLS
DPEAP
Question #81Part 2Security

What weakness is introduced into a WLAN environment when WPA2-Personal is used for security?

AThe Pairwise Mater Key (PMK) is shared by all users.
BIt does not use the WPA 4-Way Handshake.
CThe Pairwise Temporal Key (PTK) is specific to each session.
DIt uses X.509 certificates generated by a Certification Authority.
Question #82Part 2Authentication/Authorization

What type of authentication does HPE Aruba Networking’s Captive Portal use?

AMAC authentication
BLayer 3 authentication
CLayer 2 authentication
D802.1X authentication
Question #83Part 2Switching

You have been asked to onboard a new CX 6300M in a customer deployment. You are working remotely instead of on-site. A colleague is installing the switch and has provided a remote console session to configure the edge switch. You have been asked to configure a link aggregation back to the cores using interfaces 1/1/51 and 1/1/52. The project Senior Engineer has asked you to configure the switch and .1Q uplink according to these guidelines: 1. Add VLAN 20 to the local VLAN database with the name Mgmt. 2. Add an L3 SVI on VLAN 20 for Management using address .10 in the 10.1.1.0/24 subnet. 3. Add LAG 1 using LACP mode active for the uplink. 4. Use VLAN 20 as the native VLAN on the LAG. 5. Ensure all interfaces are ON. Which configuration script will accomplish the task?

A![](https://cdn.examcademy.com/images/questions/1785604437164-94asc1lx.png)
B![](https://cdn.examcademy.com/images/questions/1785604439590-pbztm5l3.png)
C![](https://cdn.examcademy.com/images/questions/1785604443223-dpc6b00n.png)
D![](https://cdn.examcademy.com/images/questions/1785604446382-7bxzce3o.png)
Question #84Part 2Troubleshooting

After configuring the edge-switch uplink as requested, your colleague reports that they cannot ping the core. You ask them to confirm that the connection is plugged in and that the switch is powered on; they confirm both. You ping the core switch and verify that the ping also fails. Knowing the nature of this deployment, which commands could you use to troubleshoot the issue?

A![](https://cdn.examcademy.com/images/questions/1785604437980-nwhiqma9.png)
B![](https://cdn.examcademy.com/images/questions/1785604441604-e5xamyrd.png)
C![](https://cdn.examcademy.com/images/questions/1785604445202-4jpgkigh.png)
D![](https://cdn.examcademy.com/images/questions/1785604448064-qbrjcl5m.png)
Question #85Part 2Routing

Review the following configuration. ![Question Image](https://cdn.examcademy.com/images/questions/1785126040755-zj217rkp.png) Why would OSPF be configured to use the IP address `10.1.200.1` as its router ID?

AThe IP address associated with the loopback interface is non-routable and prevents loops.
BThe loopback interface state is dependent on the management interface state and reduces routing updates.
CThe IP address associated with the loopback interface is routable and prevents loops.
DThe loopback interface state is independent of any physical interface and reduces routing updates.

📢 Unlock Full Access to Success!

"The content displayed here is a promotional preview and contains only 50% of the actual exam database. To access the complete set of updated questions, please upgrade to the Full Version."

👉 Click the button and follow the instructions to secure your full access immediately!