You have an Active Directory forest that contains 30 servers and 6,000 client computers. You deploy a new DHCP server that runs Windows Server 2016. You need to retrieve the list of the authorized DHCP servers. Which command should you run?

Correct Answer: Netstat-p IP ""s ""a

You have a server named Server1 that runs Windows Server 2016. Server1 is an IP Address Management (IPAM) server that collects DHCP and DNS logs and events for your entire network. You need to get the IP addresses that were assigned to a client computer named Computer1 during the last week. What should you do on Server1?

Correct Answer: Open Event Viewer and click Windows Logs. Filter the Security log for Computer1.

You are deploying a small network that has 30 client computers. The network uses the 192.168.1.0/24 address space. All computers obtain IP configurations from a DHCP server named Server1. You install a server named Server2 that runs Windows Server 2016. Server2 has two network adapters named Internal and Internet. Internet connects to an Internet Service Provider (ISP) and obtains the 131.107.0.10 IP address. Internal connects to the internal network and is configured to use the 192.168.1.250 IP address. You need to provide Internet connectivity for the client computers. What should you do?

Correct Answer: On Server1, stop the DHCP server. On the Internal network adapter on Server2, enable Internet Connection Sharing (ICS).

You have Hyper-V host named Server1. Server1 has a network adapter that has virtual machine queue (VMQ) enabled. The network adapter connects at 10 Gbps and has an IPV4 address. Server1 hosts a virtual machine named VM1. VM1 has a single network adapter and four processors. You need to distribute the network processing load across the VM1 processors. What should you do?

Correct Answer: From Windows PowerShell on VM1, run the Enable-NetAdapterRSS cmdlet.

Your network contains an Active Directory domain named contoso.com. The domain contains a Hyper-V host. You are deploying Software Defined Network (SDN) by using Windows Server 2016. You deploy a virtual machine that runs Windows Server 2016, and you install the Network Controller server role. You need to configure the virtual machine as the network controller. What should you do?

Correct Answer: Run the Install-NetworkControllerCluster cmdlet and set ClientAuthentication to None.

Note: This question is part of a series of questions that use the same or similar answer choices. An answer choice may be correct for more than one question in the series. Each question is independent of the other questions in this series. Information and details provided in a question apply only to that question. Your company has five departments, including a web research department. You have a DHCP server named Server1 and two DNS servers named DNS1 and DNS2. Server1 has an Ipv4 scope named Scope1. All client computers are configured to use DNS1 for name resolution. You need to ensure that users in the web research department use DNS2 for name resolution. What should you do on Server1?

Correct Answer: From the properties of Scope1, configure Name Protection.

You have an IP Address Management (IPAM) server named Server1 that runs Windows Server 2016. You have five DHCP servers. Server1 manages all of the DHCP servers. On Server1, an administrator uses Purge Event Catalog Data to remove all of the events from the last 30 days. You need to view all of these lease requests that were denied during the last two days. What should you do?

Correct Answer: On each DHCP server, review the DHCP Server operational event log.

You have Hyper-V host named Server1. Server1 has a network adapter that has virtual machine queue (VMQ) enabled. The network adapter connects at 10 Gbps and has an IPV4 address. Server1 hosts a virtual machine named VM1. VM1 has a single network adapter and four processors. You need to distribute the network processing load across the VM1 processors. What should you do?

Correct Answer: From Device Manager on VM1, configure Receive Side Scaling.

You have a server named Server1 that runs Windows Server 2016. Server1 is an IP Address Management (IPAM) server that collects DHCP and DNS logs and events for your entire network. You need to get the IP addresses that were assigned to a client computer named Computer1 during the last week. What should you do on Server1?

Correct Answer: From the IPAM node in Server Manager, click Event Catalog, and then review the IP Address Tracking.

Your company has a main office in London and a branch office in Seattle. The offices connect to each other by using a WAN link. In the London office, you have a Distributed File System (DFS) server named FS1 that contains a folder named Folder1. In the Seattle office, you have a DFS server named FS2. All servers run Windows Server 2016. You configure replication of Folder1 to FS2. Users in both offices frequently add files in Folder1. You monitor DFS Replication, and you discover excessive replication over the WAN link during business hours. You need to reduce the amount of bandwidth used for replication during business hours. The solution must ensure that the users can continue to save content to Folder1. What should you do?

Correct Answer: Modify the properties of the replication group.

Your company owns the public Internet IP address range of 131.107.20.0 to 131.107.20.255. You need to create a subnet that supports four hosts. The solution must minimize the number of addresses available to the subnet. Which subnet should you use?

Correct Answer: 131.107.20.0 with subnet mask 255.255.255.224

You have a server named Server1 that runs Windows Server 2016. Server1 has the following routing table. What will occur when Server1 attempts to connect to a host that has an IP address of 172.20.10.50?

Correct Answer: Server1 will silently drop the connection attempt.

You have a server that is configured as a hosted BranchCache server. You discover that a Service Connection Point (SCP) is missing for the BranchCache server. What should you run to register the SCP?

Correct Answer: Enable-BCHostedServer

You have a virtual machine named Server1 that runs Windows Server 2016. You plan to use Server1 as part of a Software Defined Networking (SDN) solution. You need to implement the Border Gateway Protocol (BGP) on Server1. What should you install?

Correct Answer: the Peer Name Resolution Protocol (PNRP) feature

Your company has two main offices. The offices are located in London and Seattle. All servers run Windows Server 2016. In the Seattle office, you have a Distributed File System (DFS) server named FS1. FS1 has a folder named Folder1 that contains large Windows image files. In the London office, you deploy a DFS server named FS2, and you then replicate Folder1 to FS2. After several days, you discover that the replication of certain files failed to complete. You need to ensure that all of the files in Folder1 can replicate to FS2. What should you do?

Correct Answer: Create a quota for Folder1 by using File Server Resource Manager (FSRM).

You are deploying Software Defined Networking (SDN) by using Windows Server 2016. You plan to deploy a three-node Network Controller cluster. You plan to use virtual machines for the network controller and the management client. The virtual machines will NOT be domain-joined. You need to configure authentication for the cluster. Which command should you run?

Correct Answer: Install-NetworkControllerCluster ""Node @{Node1, Node1, Node3} ""ClientAuthentication X509

You implement Software Defined Networking (SDN) by using the Network Controller server role. You have a virtual network named VNET1 that contains servers used by developers. You need to ensure that only devices from the 192.168.0.0/24 subnet can access the virtual machine in VNET1. What should you configure?

Correct Answer: a network security group (NSG)

You have a DNS server named Server1 that runs Windows Server 2016. Server1 has two Active Directory-integrated zones named contoso.com and adatum.com. All client computers run Windows 10. Server1 recently experienced millions of erroneous DNS queries causing a denial of service. You need to reduce the likelihood that a similar attack will cause a denial of service. The solution must ensure that Server1 continues to resolve names for clients. What should you do?

Correct Answer: Configure DNS policies on Server1

Your network contains an Active Directory forest named contoso.com. The forest contains five domains. You manage DNS for the contoso.com domain only. You are not responsible for managing DNS for the child domains. The DNS servers in a child domain named research.contoso.com are reconfigured often. You need to ensure that clients in contoso.com can resolve addresses in research.contoso.com. The solution must minimize zone replication traffic. What should you do?

Correct Answer: Create a delegation for research.contoso.com

You have a server named Server1 that runs Windows Server 2016. Server1 is in a workgroup and has the DNS Server role installed. You need to enable DNS analytical diagnostic logging on Server1. What should you do?

Correct Answer: From Local Group Policy Editor, configure Audit Policy.

Your network contains an Active Directory domain named contoso.com. The domain contains a server named Server1 that runs Windows Server 2016. Server1 has IP Address Management (IPAM) installed. IPAM is configured to use the Group Policy based provisioning method. The prefix for the IPAM Group Policy objects (GPOs) is IP. From Group Policy Management, you manually rename the IPAM GPOs to have a prefix of IPAM. You need to modify the GPO prefix used by IPAM. What should you do?

Correct Answer: Click Provision the IPAM server in Server Manager.

You have a server named Server1 that runs Windows Server 2016. Server1 is a Hyper-V host that hosts a virtual machine named VM1. Server1 has three network adapter cards that are connected to virtual switches named vSwitch1, vSwitch2 and vSwitch3. You configure NIC Teaming on VM1 as shown in the exhibit. (Click the Exhibit button.) You need to ensure that VM1 will retain access to the network if a physical network adapter card fails on Server1. What should you do?

Correct Answer: From Hyper-V Manager on Server1, modify the settings on VM1.

You have an application named App1. App1 is distributed to multiple Hyper-V virtual machines in a multitenant environment. You need to ensure that the traffic is distributed evenly among the virtual machines that host App1. What should you include in the environment?

Correct Answer: an RAS Gateway and Windows Server Software Load Balancing (SLB) nodes

You have an Active Directory domain that contains several Hyper-V hosts that run Windows Server 2016. You plan to deploy network virtualization and to centrally manage Datacenter Firewall policies. Which component must you install for the planned deployment?

Correct Answer: the Canary Network Diagnostics feature

Welcome to awslagi.com – Sharing AWS, Google Cloud, Microsoft Azure IT Exams. It's free for all!

MCSA Networking with Windows Server 2016

Build Windows Server 2016 networking skills for enterprise use.

4.8★★★★★(192 ratings)

19,424 studentsIntermediate

Develop networking knowledge for Windows Server 2016 environments, including connectivity, routing, DNS, DHCP, and remote access. The exam helps you manage the network services that keep enterprise infrastructure connected and resilient. This certification supports infrastructure roles that require reliable network operations. It is especially useful for administrators who maintain the communication backbone of server environments.

What you'll learn

Configure server networking- Manage DNS and DHCP- Support routing- Enable remote access- Troubleshoot connectivity

70-741

Lectures2

Quizzes0

Duration30 week

Students19,424

$20.00

📢 Unlock Full Access to Success!

"The content displayed here is a promotional preview and contains only 50% of the actual exam database. To access the complete set of updated questions, please upgrade to the Full Version."

👉 Click the button and follow the instructions to secure your full access immediately!