Welcome to awslagi.com – Sharing AWS, Google Cloud, Microsoft Azure IT Exams. It's free for all!

NSE7-SDW-7-2: Fortinet NSE 7 - SD-WAN 7.2

Master the Fortinet Fortinet NSE 7 - SD-WAN 7.2 (NSE7-SDW-7-2) certification exam with 35 realistic practice questions covering Routing and Sessions, SD-WAN Overlay Design and Best Practices, Monitoring and Troubleshooting, Introduction.

4.8★★★★★(151 ratings)
21,599 studentsIntermediate
Prepare for the Fortinet Fortinet NSE 7 - SD-WAN 7.2 (NSE7-SDW-7-2) certification with scenario-based practice questions modeled on real exam objectives. You will build practical confidence across key domains including Routing and Sessions, SD-WAN Overlay Design and Best Practices, Monitoring and Troubleshooting, Introduction. Each question includes structured answer options and hint answers to help you identify knowledge gaps quickly, reinforce core Fortinet concepts, and pass the NSE7-SDW-7-2 exam on your first attempt.

What you'll learn

  • Routing and Sessions
  • SD-WAN Overlay Design and Best Practices
  • Monitoring and Troubleshooting
  • Introduction
  • Members, Zones, and Performance SLAs
  • Rules

NSE7-SDW-7-2

Lectures1
Questions35
Duration30 week
Students21,599

$20.00

Full Free Question Bank (35 Questions)

NSE7-SDW-7-2: Fortinet NSE 7 - SD-WAN 7.2 (NSE7-SDW-7-2) Practice Questions & Verified Answers

Click any option to test your knowledge, or reveal the verified answer and detailed explanation below each question.

Question #1Part 1Routing and SessionsSelect 3

What are three core routing principles in SD-WAN? (Choose three.)

ABy default. SD-WAN members are skipped if they do not have a valid route to the destination.
BBy default. SD-WAN rules are skipped if the best route to the destination is not an SD-WAN member.
CFortiGate performs route lookups for new sessions only.
DSD-WAN rules have precedence over ISDB routes.
ERegular policy routes have precedence over SD-WAN rules.
Question #2Part 1SD-WAN Overlay Design and Best PracticesSelect 2

What are two benefits of using an IPsec recommended template to configure an IPsec tunnel in a hub-and-spoke topology? (Choose two.)

AIt ensures consistent settings between phase1 and phase2.
BIt guides the administrator to use Fortinet recommended settings.
CThe VPN monitor tool provides additional statistics for tunnels defined with an IPsec recommended template.
DIt automatically install IPsec tunnels to every spoke when they are added to the FortiManager ADOM.
Question #3Part 1SD-WAN Overlay Design and Best PracticesSelect 2

In a hub-and-spoke topology, which two benefits result from enabling ADVPN on the IPsec overlays? (Choose two.)

AIt provides the benefits of a full-mesh topology in a hub-and-spoke network.
BIt enables spokes to establish shortcuts to third-party gateways.
CIt provides direct connectivity between spokes by creating shortcuts.
DIt enables spokes to bypass the hub during shortcut negotiation.
Question #4Part 1Monitoring and Troubleshooting

Which CLI command is used for real-time troubleshooting of ADVPN negotiation?

Aget router info routing-table all
Bget ipsec tunnel list
Cdiagnose vpn tunnel list
Ddiagnose debug application ike
Question #5Part 1Routing and Sessions

Refer to the following exhibit. ![Question Image](https://cdn.examcademy.com/images/questions/1784459428185-rqu30k6g.png)

AFortiGate does not change the routing information on existing sessions that use a valid gateway, after a route change.
BFortiGate always blocks all traffic, after a route change.
CFortiGate performs routing lookups for new sessions only, after a route change.
DFortiGate flushes all routing information from the session table, after a route change.
Question #6Part 1Routing and SessionsSelect 3

Refer to the exhibit. ![Question Image](https://cdn.examcademy.com/images/questions/1784459429266-atz2q8ba.png) The exhibit displays the BGP configuration on the hub of a hub-and-spoke topology. The administrator wants BGP to advertise prefixes from spokes to other spokes across the IPsec overlays, including additional paths. However, the administrator does not see prefixes from other spokes or the additional paths in the spoke routing table. Based on the exhibit, which three settings must the administrator configure within each BGP neighbor group so that spokes can learn other spokes’ prefixes and their additional paths? (Choose three.)

AEnable soft-reconfiguration
BEnable route-reflector-client
CSet additional-path to send
DSet adv-additional-path to the number of additional paths to advertise
ESet advertisement-interval to the number of additional paths to advertise
Question #7Part 1Routing and SessionsSelect 2

Refer to the exhibit. ![Question Image](https://cdn.examcademy.com/images/questions/1784459430604-0ir3h7ho.png) The exhibit displays output from the `diagnose sys sdwan service` command collected on a FortiGate device. The administrator needs to determine through which interface FortiGate will steer traffic from local users on subnet `10.0.1.0/255.255.255.192` to the Salesforce business application located on HQ server `10.0.0.1`. Based on the exhibits, which two statements are correct? (Choose two.)

AThere is no service defined for the Salesforce application, so FortiGate will use the service rule 3 and steer the traffic through interface T_HQ1.
BFortiGate steers traffic to HQ servers according to service rule 1 and it uses port1 or port2 because both interfaces are selected.
CWhen FortiGate cannot recognize the application of the flow it steers the traffic destined to server 10.0.0.1 according to service rule 3.
DFortiGate steers traffic for business application according to service rule 2 and steers traffic through port2.
Question #8Part 1Routing and SessionsSelect 2

Refer to the exhibit. ![Question Image](https://cdn.examcademy.com/images/questions/1784459431295-vwkp5v76.png) Two hub-and-spoke groups are linked by a site-to-site IPsec VPN between Hub 1 and Hub 2. Which two configuration settings are required for the Toronto and London spokes to establish an ADVPN shortcut? (Choose two.)

AOn the hubs, net-device must be enabled on all IPsec VPNs.
Bauto-discovery-forwarder must be enabled on all IPsec VPNs.
COn the spokes, auto-discovery-receiver must be enabled on the IPsec VPN to the hub.
DOn the hubs, auto-discovery-sender must be enabled on the IPsec VPNs to spokes.
Question #9Part 1IntroductionSelect 2

Which two common use cases apply to remote internet access (RIA)? (Choose two.)

AProvide internet access through the hub.
BCentralize security inspection on the hub.
CProvide thorough inspection on spokes.
DProvide direct internet access on spokes.
Question #10Part 1Members, Zones, and Performance SLAs

Which diagnostic command can be used to display the configured SD-WAN zones and their assigned members?

Adiagnose sys sdwan member
Bdiagnose sys sdwan interface
Cdiagnose sys sdwan zone
Ddiagnose sys sdwan service
Question #11Part 1SD-WAN Overlay Design and Best Practices

Which assertion is correct regarding SD-WAN and ADVPN?

ASD-WAN can steer traffic to ADVPN shortcuts only for rules defined with strategy manual or best quality.
BSD-WAN does not monitor the health and performance of ADVPN shortcuts.
CSD-WAN cannot steer traffic to ADVPN shortcuts established over IPSec overlays if the zone contains physical interfaces.
DSD-WAN can steer traffic to ADVPN shortcuts established over IPsec overlays configured as SD-WAN members.
Question #12Part 1SD-WAN Overlay Design and Best Practices

Which benefit does application steering provide in SD-WAN?

AThe traffic always skips the regular policy routes.
BYou do not need to configure firewall policies that accept the SD-WAN traffic.
CYou steer traffic based on the detected application.
DYou do not need to enable SSL inspection.
Question #13Part 1Members, Zones, and Performance SLAs

Which two statements regarding the SD-WAN members are true?

AInterfaces of type virtual wire pair can be used as SD-WAN members.
BYou can manually define the SD-WAN members sequence number.
CAn SD-WAN member can belong to two or more SD-WAN zones.
DInterfaces of type VLAN can be used as SD-WAN members.
Question #14Part 1Rules

Refer to the exhibit shown. ![Question Image](https://cdn.examcademy.com/images/questions/1784459658846-w6aqpw0p.png) The exhibit displays the SD-WAN rule status and configuration. Based on the exhibit, which change to the measured latency will cause `T_MPLS_0` to become the new preferred member?

AWhen T_INET_0_0 has a latency of 250 ms.
BWhen T_MPLS_0 has a latency of 80 ms.
CWhen T_INET_0_0 and T_MPLS_0 have the same latency.
DWhen T_MPLS_0 has a latency of 100 ms.
Question #15Part 1Members, Zones, and Performance SLAsSelect 2

Refer to the exhibit. ![Question Image](https://cdn.examcademy.com/images/questions/1784459661408-ytqajxvm.png) Based on the exhibit, which two statements correctly describe the health of the selected members? (Choose two.)

AAfter FortiGate switches to active mode, the SLA performance rule never fallsback to passive monitoring.
BFortiGate passively monitors the member if TCP traffic is passing through the member.
CFortiGate can offload the traffic that is subject to passive monitoring to hardware.
DDuring passive monitoring, the SLA performance rule cannot detect dead members.
Question #16Part 1Monitoring and TroubleshootingSelect 2

Refer to the exhibit. ![Question Image](https://cdn.examcademy.com/images/questions/1784459663109-7gbjfoqr.png) Based on this output, which two conclusions are true? (Choose two.)

AEntry 1 (id=1) is a regular policy route.
BThere is more than one SD-WAN rule configured.
CThe SD-WAN rules take precedence over regular policy routes.
DThe all_rules rule represents the implicit SD-WAN rule.
Question #17Part 1Monitoring and TroubleshootingSelect 2

Refer to the exhibits. Exhibit

APort1 and port2 do not have a valid route to the destination.
BThe session 3-tuple did not match any of the existing entries in the ISDB application cache.
CFull SSL inspection is not enabled on the matching firewall policy.
DFortiGate did not refresh the routing information on the session after the application was detected.
Question #18Part 1Routing and SessionsSelect 2

Which two statements are correct about using SD-WAN to steer local-out traffic? (Choose two.)

ABy default, FortiGate does not check if the selected member has a valid route to the destination.
BYou must configure each local-out feature individually, to use SD-WAN.
CBy default, local-out traffic does not use SD-WAN.
DFortiGate does not consider the source address of the packet when matching an SD-WAN rule for local-out traffic.
Question #19Part 1Rules

In which SD-WAN template field may you use a metadata variable?

AYou can use metadata variables only to define interface members and the gateway IP.
BAny field identified with a dollar sign (S) in a magnifying glass.
CAny field identified with an "M" in a circle.
DAll SD-WAN template fields support metadata variables.
Question #20Part 1Routing and Sessions

Refer to the exhibit. ![Question Image](https://cdn.examcademy.com/images/questions/1784459675987-9frzkp7q.png) Which statement is true about the ADVPN device's role in handling traffic?

AThis is a spoke that has received an offer from a remote hub.
BTwo spokes, 192.2.0.1 and 10.0.2.101, establish a shortcut.
CThis is a hub that has received an offer from a spoke and has forwarded it to another spoke.
DAn IKE session is established between 10.0.1.101 and 10.0.2.101 in the process of forming a shortcut tunnel.
Question #21Part 1SD-WAN Overlay Design and Best Practices

Among the IPsec tunnel templates available in FortiManager, which template would you use to configure static tunnels in a hub-and-spoke topology?

AHub_IPsec_Recommended
BStatic_IPsec_Recommended
CIPsec Fortinet Recommended
DBranch IPsec Recommended
Question #22Part 1Routing and SessionsSelect 2

Refer to the exhibit. ![Question Image](https://cdn.examcademy.com/images/questions/1784459680099-itfi9wba.png) The device uses IBGP to exchange routes. Which two statements are correct about the IBGP configuration and routing information on the device? (Choose two.)

AEach BGP route is three hops away from the destination.
Bibgp-multipath is disabled.
CYou can run the get router info routing-table database command to display the additional paths.
Dadditional-path is enabled.
Question #23Part 1RulesSelect 2

Refer to the exhibits. Exhibit A - ![Question Image](https://cdn.examcademy.com/images/questions/1784459676652-pt60gqtk.png) Exhibit B - ![Question Image](https://cdn.examcademy.com/images/questions/1784459680676-fyrptsu9.png) Exhibit A displays the packet-duplication rule configuration, the SD-WAN zone-status output, and the sniffer output on a FortiGate device serving as the sender. Exhibit B displays the sniffer output on a FortiGate device serving as the receiver. The administrator configured packet duplication on both FortiGate devices. The sender FortiGate's sniffer output shows that it forwards an ICMP echo-request packet across three overlays, but receives only one reply packet through T_INET_1. Based on the output in the exhibits, which two reasons could cause this behavior? (Choose two.)

AThe ICMP echo request packets sent over T_INET_0 and T_MPLS were dropped along the way.
BOn the receiver FortiGate, packet-de-duplication is enabled.
COn the sender FortiGate, duplication-max-num is set to 3.
DThe sender FortiGate has anti-replay enabled to block duplicate ICMP replies.
Question #24Part 1Monitoring and TroubleshootingSelect 2

Refer to the exhibit showing the output from the `diagnose sys sdwan health-check status` command collected on a FortiGate device. ![Question Image](https://cdn.examcademy.com/images/questions/1784459680969-sv43ruko.png) Which two statements are correct about the health-check status on this FortiGate device? (Choose two.)

AThe interface T_INET_0 missed three SLA targets.
BThe interface T_INET_1 missed one SLA target.
CThere is no SLA criteria configured for the health-check Level3_DNS.
DThe health-check VPN_PING orders the members according to the measured jitter.
Question #25Part 1Members, Zones, and Performance SLAs

Refer to the exhibits. Exhibit A - ![Question Image](https://cdn.examcademy.com/images/questions/1784459677342-uzet87xl.png) Exhibit B - ![Question Image](https://cdn.examcademy.com/images/questions/1784459681231-zjtgea14.png) Exhibit A displays the SD-WAN performance SLA, and exhibit B displays the SD-WAN member status, routing table, and performance SLA status. If FortiGate detects that port2 is dead, what behavior is expected?

AHost 8.3.8.8 is reachable through port1 and port2.
BPort2 becomes alive after three successful probes are detected.
CThe administrator manually restores the static routes for port2, if port2 becomes alive.
DFortiGate disables all static routes for port2.
Question #26Part 1Rules

Refer to the exhibit. ![Question Image](https://cdn.examcademy.com/images/questions/1784459684633-caybqtyo.png) In a dual-hub, hub-and-spoke SD-WAN deployment, what is a benefit of disabling the anti-replay setting on the hubs?

AIt instructs the hub to skip content inspection on TCP traffic, to improve performance.
BIt instructs the hub to not check the ESP sequence numbers on IPsec traffic, to improve performance.
CIt instructs the hub to disable TCP sequence number check, which is required for TCP sessions originated from spokes to fail over back and forth between the hubs.
DIt instructs the hub to disable the reordering of TCP packets on behalf of the receiver, to improve performance.
Question #27Part 1SD-WAN Overlay Design and Best PracticesSelect 3

An administrator uses the FortiManager SD-WAN overlay template to prepare an SD-WAN deployment. Using information supplied through the SD-WAN overlay template wizard, FortiManager creates templates that are ready to install on spoke and hub devices. Select three templates that the SD-WAN overlay template creates for a spoke device. (Choose three.)

AIPsec tunnel template
BBGP template
COverlay template
DSystem template
ECLI template
Question #28Part 1SD-WAN Overlay Design and Best PracticesSelect 2

Which two advantages does forward error correction (FEC) provide in IPsec VPNs? *(Choose two.)*

AFEC can leverage multiple IPsec tunnels for parity packets transmission.
BFEC transmits parity packets that can be used to reconstruct packet loss.
CFEC improves reliability of noisy links.
DFEC supports hardware offloading.
Question #29Part 1SD-WAN Overlay Design and Best PracticesSelect 3

The SD-WAN overlay template helps prepare SD-WAN deployments. To finish the tasks performed by the SD-WAN overlay template, the administrator must complete certain post-run tasks. Which three mandatory post-run tasks must be performed? (Choose three.)

AAssign an sdwan_id metadata variable to each device (branch and hub).
BAssign a branch_id metadata variable to each branch device.
CCreate policy packages for branch devices.
DConfigure SD-WAN rules.
EConfigure routing through overlay tunnels created by the SD-WAN overlay template.
Question #30Part 1RulesSelect 2

Which two statements are accurate when traffic matches the implicit SD-WAN rule? (Choose two.)

AThe session information output displays no SD-WAN-specific details.
BAll SD-WAN rules have the default and gateway setting enabled.
CTraffic does not match any of the entries in the policy route table.
DTraffic is load balanced using the algorithm set for the v4-ecmp-mode setting.
Question #31Part 1Routing and Sessions

Refer to the exhibit. Based on the exhibit, which two actions does FortiGate take for sessions after a firewall-policy change?

AFortiGate terminates the old sessions.
BFortiGate evaluates new sessions.
CFortiGate does not change existing sessions.
DFortiGate flushes all sessions.
Question #32Part 1Monitoring and TroubleshootingSelect 2

Refer to the exhibit. ![Question Image](https://cdn.examcademy.com/images/questions/1784459824800-24v9c4xg.png) An administrator is troubleshooting SD-WAN on a FortiGate device. A device behind `branch1_fgt` generates traffic to the `10.0.0.0/8` network. The administrator expects this traffic to match SD-WAN rule ID 1 and be routed through `T_INET_0`. However, it is routed through `T_INET_1`. Based on the output in the exhibit, which two reasons could cause this behavior? (Choose two.)

AT_INET_1 has a lower route priority value (higher priority) than T_INET_0.
BThe traffic matches a regular policy route configured with T_INET_1 as the outgoing device.
CT_INET_1 has a higher member configuration priority than T_INET_0.
DT_INET_0 does not have a valid route to the destination.
Question #33Part 1Members, Zones, and Performance SLAs

Refer to the exhibit, which displays an SD-WAN zone configuration in the FortiGate GUI. Based on the exhibit, which statement is correct?

AYou can move port1 from the underlay zone to the overlay zone.
BYou can delete the virtual-wan-link zone because it contains no member.
CThe corporate zone contains no member.
DThe overlay zone contains four members.
Question #34Part 1Routing and SessionsSelect 2

Refer to the exhibit. ![Question Image](https://cdn.examcademy.com/images/questions/1784459827278-goul7tmn.png) The exhibit displays session details and the index numbers for several relevant interfaces on a FortiGate appliance that supports hardware offloading. Based on the information shown in the exhibits, which two statements about the session are correct? (Choose two.)

AThe main session cannot be offloaded to hardware.
BThe original direction of the symmetric traffic flows from port3 to port2.
CThe reply direction of the asymmetric traffic flows from port2 to port3.
DThe auxiliary session can be offloaded to hardware.
Question #35Part 1Rules

Refer to the exhibits. Exhibit A - ![Question Image](https://cdn.examcademy.com/images/questions/1784459833297-a9h3z9qg.png) Exhibit B - ![Question Image](https://cdn.examcademy.com/images/questions/1784459837525-7va54q0o.png) Exhibit A displays a policy package definition. Exhibit B displays the install log the administrator received when attempting to install the policy package on FortiGate devices. Based on the output shown in the exhibits, what can the administrator do to resolve the issue?

ACreate dynamic mapping for the LAN interface for all devices in the installation target list.
BPolicies can refer to only one LAN source interface. Keep only the D-LAN, which is the dynamic LAN interface.
CDynamic mapping should be done automatically. Review the LAN interface configuration for branch2_fgt.
DUse a metadata variable instead of a dynamic interface to define the firewall policy.

📢 Unlock Full Access to Success!

"The content displayed here is a promotional preview and contains only 50% of the actual exam database. To access the complete set of updated questions, please upgrade to the Full Version."

👉 Click the button and follow the instructions to secure your full access immediately!