Welcome to awslagi.com – Sharing AWS, Google Cloud, Microsoft Azure IT Exams. It's free for all!

NSE7-SDW-7-0: Fortinet NSE 7 - SD-WAN 7.0

Master the Fortinet Fortinet NSE 7 - SD-WAN 7.0 (NSE7-SDW-7-0) certification exam with 31 realistic practice questions covering Enterprise Networking, Network Security, SD-WAN.

4.8★★★★★(339 ratings)
21,597 studentsIntermediate
Prepare for the Fortinet Fortinet NSE 7 - SD-WAN 7.0 (NSE7-SDW-7-0) certification with scenario-based practice questions modeled on real exam objectives. You will build practical confidence across key domains including Enterprise Networking, Network Security, SD-WAN. Each question includes structured answer options and hint answers to help you identify knowledge gaps quickly, reinforce core Fortinet concepts, and pass the NSE7-SDW-7-0 exam on your first attempt.

What you'll learn

  • Enterprise Networking
  • Network Security
  • SD-WAN

NSE7-SDW-7-0

Lectures1
Questions31
Duration30 week
Students21,597

$20.00

Full Free Question Bank (31 Questions)

NSE7-SDW-7-0: Fortinet NSE 7 - SD-WAN 7.0 (NSE7-SDW-7-0) Practice Questions & Verified Answers

Click any option to test your knowledge, or reveal the verified answer and detailed explanation below each question.

Question #1Part 1Enterprise Networking

Which diagnostic command can be used to display the member utilization statistics measured by performance SLAs during the last 10 minutes?

Adiagnose sys sdwan intf-sla-log
Bdiagnose sys sdwan health-check
Cdiagnose sys sdwan log
Ddiagnose sys sdwan sla-log
Question #2Part 1Network Security

Which two protocols in the IPsec suite are most commonly used for authentication and encryption?

AEncapsulating Security Payload (ESP)
BSecure Shell (SSH)
CInternet Key Exchange (IKE)
DSecurity Association (SA)
Question #3Part 1Enterprise Networking

Which two settings can be configured to accelerate routing convergence in BGP?

Aupdate-source
Bset-route-tag
Choldtime-timer
Dlink-down-failover
Question #4Part 1SD-WANSelect 2

Which two statements are true when traffic matches the implicit SD-WAN rule? (Choose two.)

AThe sdwan_service_id flag in the session information is 0.
BAll SD-WAN rules have the default setting enabled.
CTraffic does not match any of the entries in the policy route table.
DTraffic is load balanced using the algorithm set for the v4-ecmp-mode setting.
Question #5Part 1SD-WANSelect 2

Which two statements concerning SD-WAN central management are correct? (Choose two.)

AThe objects are saved in the ADOM common object database.
BIt does not support meta fields.
CIt uses templates to configure SD-WAN on managed devices.
DIt supports normalized interfaces for SD-WAN member configuration.
Question #6Part 1SD-WANSelect 2

Refer to the exhibit. ![Question Image](https://cdn.examcademy.com/images/questions/1784454931059-vvzdele5.png) An administrator is troubleshooting SD-WAN on a FortiGate. A device behind branch1_fgt sends traffic to the 10.0.0.0/8 network. The administrator expects this traffic to match SD-WAN rule ID 1 and be routed through T_INET_0_0. Instead, it is routed through T_INET_1_0. Based on the output in the exhibit, which two reasons could cause this behavior? (Choose two.)

AThe traffic matches a regular policy route configured with T_INET_1_0 as the outgoing device.
BT_INET_1_0 has a lower route priority value (higher priority) than T_INET_0_0.
CT_INET_0_0 does not have a valid route to the destination.
DT_INET_1_0 has a higher member configuration priority than T_INET_0_0.
Question #7Part 1Network Security

Refer to the exhibit. ![Question Image](https://cdn.examcademy.com/images/questions/1784454931303-6lt9r72b.png) Which configuration change is necessary if the responder FortiGate uses a dynamic routing protocol to exchange routes over IPsec?

Atype must be set to static.
Bmode-cfg must be enabled.
Cexchange-interface-ip must be enabled.
Dadd-route must be disabled.
Question #8Part 1SD-WAN

Refer to the exhibit. Which algorithm does SD-WAN use to distribute traffic that does not match any SD-WAN rules?

AAll traffic from a source IP to a destination IP is sent to the same interface.
BAll traffic from a source IP is sent to the same interface.
CAll traffic from a source IP is sent to the most used interface.
DAll traffic from a source IP to a destination IP is sent to the least used interface.
Question #9Part 1Enterprise NetworkingSelect 2

Refer to the exhibit. ![Question Image](https://cdn.examcademy.com/images/questions/1784454936848-hyyv3ph3.png) The device is exchanging routes through IBGP. Which two statements are correct about the device's IBGP configuration and routing information? (Choose two.)

AEach BGP route is three hops away from the destination.
Bibgp-multipath is disabled.
Cadditional-path is enabled.
DYou can run the get router info routing-table database command to display the additional paths.
Question #10Part 1SD-WAN

Which CLI command is used to troubleshoot ADVPN negotiation in real time?

Aget router info routing-table all
Bdiagnose debug application ike
Cdiagnose vpn tunnel list
Dget ipsec tunnel list
Question #11Part 1Network Security

Which two advantages does using CLI templates in FortiManager provide?

AYou can reference meta fields.
BYou can configure interfaces as SD-WAN members without having to remove references first.
CYou can configure FortiManager to sync local configuration changes made on the managed device, to the CLI template.
DYou can configure advanced CLI settings.
Question #12Part 1SD-WAN

Which option best describes the SD-WAN traffic-shaping mode that is based on a percentage of the available bandwidth?

AInterface-based shaping mode
BReverse-policy shaping mode
CShared-policy shaping mode
DPer-IP shaping mode
Question #13Part 1SD-WANSelect 3

What are three key routing principles in SD-WAN? (Choose three.)

AFortiGate performs route lookups for new sessions only.
BRegular policy routes have precedence over SD-WAN rules.
CSD-WAN rules have precedence over ISDB routes.
DBy default, SD-WAN members are skipped if they do not have a valid route to the destination.
EBy default, SD-WAN rules are skipped if the best route to the destination is not an SD-WAN member.
Question #14Part 1Network Security

Refer to the exhibit. Based on the exhibit, which two actions does FortiGate take for sessions after a firewall-policy change?

AFortiGate flushes all sessions.
BFortiGate terminates the old sessions.
CFortiGate does not change existing sessions.
DFortiGate evaluates new sessions.
Question #15Part 1SD-WAN

Refer to the exhibits. Exhibit A — ![Question Image](https://cdn.examcademy.com/images/questions/1784454945023-m0ofufyf.png) Exhibit B — ![Question Image](https://cdn.examcademy.com/images/questions/1784454950847-5jq389gp.png) Exhibit A displays the SD-WAN performance SLA, and exhibit B displays the SD-WAN member status, routing table, and performance SLA status. If FortiGate detects that port2 is dead, what behavior is expected?

APort2 becomes alive after three successful probes are detected.
BFortiGate removes all static routes for port2.
CThe administrator manually restores the static routes for port2, if port2 becomes alive.
DHost 8.8.8.8 is reachable through port1 and port2.
Question #16Part 1SD-WAN

Refer to the exhibits. Exhibit A - ![Question Image](https://cdn.examcademy.com/images/questions/1784454946798-lmoo6ksy.png) Exhibit B - ![Question Image](https://cdn.examcademy.com/images/questions/1784454951510-7ai64lxq.png) Exhibit A depicts a site-to-site topology between two FortiGate devices: branch1_fgt and dc1_fgt. Exhibit B displays the system global and system settings configuration on dc1_fgt. When branch1_client establishes a connection to dc1_host, the administrator notices that, on dc1_fgt, reply traffic is routed through T_INET_0_0, although T_INET_1_0 is the preferred member in the matching SD-WAN rule. Based on the information in the exhibits, which configuration change must be made on dc1_fgt to route the reply traffic through T_INET_1_0?

AEnable auxiliary-session under config system settings.
BDisable tсp-session-without-syn under config system settings.
CEnable snat-route-change under config system global.
DDisable allow-subnet-overlap under config system settings.
Question #17Part 1SD-WAN

Refer to the exhibits. Exhibit A - ![Question Image](https://cdn.examcademy.com/images/questions/1784454950145-384kumjz.png) Exhibit B - ![Question Image](https://cdn.examcademy.com/images/questions/1784454955687-qj25kiyh.png) Exhibit A displays the configuration of an SD-WAN rule, and exhibit B displays the corresponding rule status, routing table, and member status. The administrator wants to understand the expected behavior for traffic that matches the SD-WAN rule. Based on the exhibits, what should the administrator expect for traffic matching the SD-WAN rule?

AThe traffic will be load balanced across all three overlays.
BThe traffic will be routed over T_INET_0_0.
CThe traffic will be routed over T_MPLS_0.
DThe traffic will be routed over T_INET_1_0.
Question #18Part 1SD-WAN

Refer to the exhibit, which displays the IPsec phase 1 configuration for a spoke. What must be configured in the IPsec phase 1 configuration for ADVPN to operate with SD-WAN?

AYou must set ike-version to 1.
BYou must enable net-device.
CYou must enable auto-discovery-sender.
DYou must disable idle-timeout.
Question #19Part 1SD-WAN

In a hub-and-spoke topology, which two benefits result from enabling ADVPN on the IPsec overlays?

AIt provides the benefits of a full-mesh topology in a hub-and-spoke network.
BIt provides direct connectivity between spokes by creating shortcuts.
CIt enables spokes to bypass the hub during shortcut negotiation.
DIt enables spokes to establish shortcuts to third-party gateways.
Question #20Part 1SD-WAN

What is the route-tag setting in an SD-WAN rule used to indicate?

ATo indicate the routes for health check probes.
BTo indicate the destination of a rule based on learned BGP prefixes.
CTo indicate the routes that can be used for routing SD-WAN traffic.
DTo indicate the members that can be used to route SD-WAN traffic.
Question #21Part 1Enterprise Networking

Which two performance SLA protocols allow you to confirm that a server response contains a particular value?

Ahttp
Bicmp
Ctwamp
Ddns
Question #22Part 1SD-WAN

Refer to the exhibit. ![Question Image](https://cdn.examcademy.com/images/questions/1784455066780-6cztwgx8.png) The exhibit displays the SD-WAN rule status and configuration. Based on the exhibit, which measured-latency change will cause `T_MPLS_0` to become the new preferred member?

AWhen T_INET_0_0 and T_MPLS_0 have the same latency.
BWhen T_MPLS_0 has a latency of 100 ms.
CWhen T_INET_0_0 has a latency of 250 ms.
DWhen T_N1PLS_0 has a latency of 80 ms.
Question #23Part 1SD-WANSelect 2

Refer to the exhibit. ![Question Image](https://cdn.examcademy.com/images/questions/1784455071406-h6akusbt.png) Two hub-and-spoke groups are linked by a site-to-site IPsec VPN between Hub 1 and Hub 2. The administrator has configured ADVPN on both hub-and-spoke groups. Which two results are expected when a user in Toronto sends traffic to London? (Choose two.)

ALondon generates an IKE information message that contains the Toronto public IP address.
BTraffic from Toronto to London triggers the dynamic negotiation of a direct site-to-site VPN.
CToronto needs to establish a site-to-site tunnel with Hub 2 to bypass Hub 1.
DThe first packets from Toronto to London are routed through Hub 1 then to Hub 2.
Question #24Part 1Network Security

Refer to the exhibits. Exhibit A - ![Question Image](https://cdn.examcademy.com/images/questions/1784455065044-kkjxlf1r.png) Exhibit B - ![Question Image](https://cdn.examcademy.com/images/questions/1784455069944-d625ac1l.png) Exhibit A displays the traffic shaping policy, and Exhibit B displays the firewall policy. The administrator wants FortiGate to limit the bandwidth consumed by YouTube. During testing, the administrator finds that FortiGate does not apply traffic shaping to YouTube traffic. Based on the policies shown in the exhibits, which configuration change must be made for FortiGate to perform traffic shaping on YouTube traffic?

ADestination internet service must be enabled on the traffic shaping policy.
BApplication control must be enabled on the firewall policy.
CWeb filtering must be enabled on the firewall policy.
DIndividual SD-WAN members must be selected as the outgoing interface on the traffic shaping policy.
Question #25Part 1Network SecuritySelect 2

Refer to the exhibit shown. ![Question Image](https://cdn.examcademy.com/images/questions/1784455072326-2wkd9vsk.png) Which two statements about traffic matching the traffic shaper are true? (Choose two.)

AThe traffic shaper drops packets if the bandwidth is less than 2500 KBps.
BThe measured bandwidth is less than 100 KBps.
CThe traffic shaper drops packets if the bandwidth exceeds 6250 KBps.
DThe traffic shaper limits the bandwidth of each source IP to a maximum of 6250 KBps.
Question #26Part 1Network SecuritySelect 2

Refer to the following exhibits. ![Question Image](https://cdn.examcademy.com/images/questions/1784455082650-sq1wn7se.png) ![Question Image](https://cdn.examcademy.com/images/questions/1784455087521-2e0cbdw2.png) Which two statements regarding the IPsec VPN configuration and IPsec VPN tunnel status are true? (Choose two.)

AFortiGate does not install IPsec static routes for remote protected networks in the routing table.
BThe phase 1 configuration supports the network-overlay setting.
CFortiGate facilitated the negotiation of the T_INET_1_0_0 ADVPN shortcut over T_INET_1_0.
DDead peer detection is disabled.
Question #27Part 1SD-WAN

Which two interfaces are regarded as overlay links?

ALAG
BIPsec
CPhysical
DGRE
Question #28Part 1Network Security

Refer to the exhibit. ![Question Image](https://cdn.examcademy.com/images/questions/1784455119014-n78hjerr.png) Which statement about the packet debug flow output is correct?

AThe total number of daily sessions for 10.1.10.1 exceeded the maximum number of concurrent sessions configured in the traffic shaper, and the packet was dropped.
BThe packet size exceeded the outgoing interface MTU.
CThe number of concurrent sessions for 10.1.10.1 exceeded the maximum number of concurrent sessions configured in the traffic shaper, and the packet was dropped.
DThe number of concurrent sessions for 10.1.10.1 exceeded the maximum number of concurrent sessions configured in the firewall policy, and the packet was dropped.
Question #29Part 1SD-WANSelect 2

Refer to the exhibits. Exhibit A ![Question Image](https://cdn.examcademy.com/images/questions/1784455119561-gumhhzhc.png) Exhibit B ![Question Image](https://cdn.examcademy.com/images/questions/1784455124167-wvf1f380.png) Exhibit A displays an SD-WAN event log, and exhibit B displays the member status and the SD-WAN rule configuration. Based on the exhibits, which two statements are correct? (Choose two.)

AFortiGate updated the outgoing interface list on the rule so it prefers port2.
BPort2 has the highest member priority.
CPort2 has a lower latency than port1.
DSD-WAN rule ID 1 is set to lowest cost (SLA) mode.
Question #30Part 1SD-WAN

Which statement is accurate regarding SD-WAN and ADVPN?

ARoutes for ADVPN shortcuts must be manually configured.
BSD-WAN can steer traffic to ADVPN shortcuts, established over IPsec overlays, configured as SD-WAN members.
CSD-WAN does not monitor the health and performance of ADVPN shortcuts.
DYou must use IKEv2 on IPsec tunnels.
Question #31Part 1SD-WANSelect 2

Refer to the exhibits. Exhibit A – ![Question Image](https://cdn.examcademy.com/images/questions/1784455632216-fedot0dy.png) Exhibit B – ![Question Image](https://cdn.examcademy.com/images/questions/1784455637155-h2r4i1vw.png) Exhibit A displays the SD-WAN performance SLA configuration, SD-WAN rule configuration, and the application IDs for Facebook and YouTube. Exhibit B displays the firewall policy configuration and the underlay zone status. Based on the exhibits, which two statements are correct regarding the health and performance of port1 and port2? (Choose two.)

AThe performance is an average of the metrics measured for Facebook and YouTube traffic passing through the member.
BFortiGate is unable to measure jitter and packet loss on Facebook and YouTube traffic.
CFortiGate identifies the member as dead when there is no Facebook and YouTube traffic passing through the member.
DNon-TCP Facebook and YouTube traffic are not used for performance measurement.

📢 Unlock Full Access to Success!

"The content displayed here is a promotional preview and contains only 50% of the actual exam database. To access the complete set of updated questions, please upgrade to the Full Version."

👉 Click the button and follow the instructions to secure your full access immediately!