Welcome to awslagi.com – Sharing AWS, Google Cloud, Microsoft Azure IT Exams. It's free for all!

FCP-FMG-AD-7-6: Fortinet NSE 6 - FortiManager 7.6 Administrator

Master the Fortinet Fortinet NSE 6 - FortiManager 7.6 Administrator (FCP-FMG-AD-7-6) certification exam with 31 realistic practice questions covering Centralized management, Rules and routing, SD-WAN troubleshooting, Advanced IPsec.

4.8★★★★★(257 ratings)
14,483 studentsIntermediate
Prepare for the Fortinet Fortinet NSE 6 - FortiManager 7.6 Administrator (FCP-FMG-AD-7-6) certification with scenario-based practice questions modeled on real exam objectives. You will build practical confidence across key domains including Centralized management, Rules and routing, SD-WAN troubleshooting, Advanced IPsec. Each question includes structured answer options and hint answers to help you identify knowledge gaps quickly, reinforce core Fortinet concepts, and pass the FCP-FMG-AD-7-6 exam on your first attempt.

What you'll learn

  • Centralized management
  • Rules and routing
  • SD-WAN troubleshooting
  • Advanced IPsec
  • SD-WAN setup

FCP-FMG-AD-7-6

Lectures1
Questions31
Duration30 week
Students14,483

$20.00

Full Free Question Bank (31 Questions)

FCP-FMG-AD-7-6: Fortinet NSE 6 - FortiManager 7.6 Administrator (FCP-FMG-AD-7-6) Practice Questions & Verified Answers

Click any option to test your knowledge, or reveal the verified answer and detailed explanation below each question.

Question #1Part 1Centralized managementSelect 2

Refer to the exhibit. ![Question Image](https://cdn.examcademy.com/images/questions/1783897480229-pvf380s4.png) An administrator has assigned a new policy package to FortiGate HQ-NGFW-1. In the installation preview, they see settings that they did not change and are uncertain about those changes. Based on the exhibit, which two actions will occur if they proceed with the installation? (Choose two.)

AFortiGate HQ-NGFW-1 can use FortiManager firmware templates to upgrade firmware and ratings.
BFortiGate HQ-NGFW-1 can contact the FortiManager acting as FortiGuard Distribution Server (FDS) to download FortiGuard updates.
CFortiGate HQ-NGFW-1 will use the root_CA3 certificate in firewall address objects or policies.
DFortiManager will install the CA certificate named root_CA3 to authenticate FortiGate-to-FortiManager communication protocol (FGFM) tunnel connections with FortiGate HQ- NGFW-1.
Question #2Part 1Centralized management

Refer to the exhibit. ![Question Image](https://cdn.examcademy.com/images/questions/1783897477713-lrp765ao.png) FortiManager is deployed behind a network address translation (NAT) device, and the administrator configured the FortiManager NATed IP address in the FortiManager system administration settings. What result is expected during discovery?

AFortiManager sets both the 100.65.0.120 IP address and 10.0.13.120 IP address on FortiGate.
BFortiManager sets both the 100.65.0.120 IP address and 100.65.0.101 IP address on FortiGate.
CFortiManager sets the 100.65.0.101 IP address on FortiGate.
DFortiManager sets the 100.65.0.120 IP address on FortiGate.
Question #3Part 1Centralized management

An administrator observes that the policy package status for **HQ-NGFW-1** is **Never Installed**. What can be concluded from this status?

AThe policy package was never imported to the revision history after HQ-NGFW-1 was registered on FortiManager.
BThe policies have not yet been retrieved from the HQ-NGFW-1 device-level database of FortiManager.
CThe firewall policies exist only in the HQ-NGFW-1 device-level database, and no policy package has been assigned to the firewall.
DThe firewall policies were created or changed in the ADOM, and they need to be installed on the managed HQ-NGFW-1 for the first time.
Question #4Part 1Rules and routing

Refer to the exhibit. ![Question Image](https://cdn.examcademy.com/images/questions/1783897462365-0lzbacto.png) What conclusion can be drawn from the downloaded import report?

AFortiManager does not support per-device mapping for firewall addresses.
BThe administrator will see a new policy package named Remote-FortiGate_root in the FortiManager ADOM database.
CortiManager will change the configuration of REMOTE_SUBNET to match the interface mapping coming in from Remote-FortiGate.
DAs a result of this policy import process, FortiManager will create a new firewall address called REMOTE_SUBNET in the ADOM database.
Question #5Part 1Centralized management

Which output appears immediately after moving the ISFW device from one ADOM to another?

A![](https://cdn.examcademy.com/images/questions/1785602699981-sibyslqr.png)
B![](https://cdn.examcademy.com/images/questions/1785602702025-xbv34vjl.png)
C![](https://cdn.examcademy.com/images/questions/1785602704213-2zgcu6a3.png)
D![](https://cdn.examcademy.com/images/questions/1785602706396-jgczrflz.png)
Question #6Part 1Centralized management

Refer to the exhibit. ![Question Image](https://cdn.examcademy.com/images/questions/1783900374757-oku1wipm.png) How does FortiManager obtain antivirus and IPS updates?

AIt uses all URLs in the list that contain the fds host name.
BIt gets updates from the server with IP address 10.0.1.50.
CIt connects to all servers marked as FortiGuard Distribution Network through Internet (FDNI) sources.
DIt connects to the public FortiGuard servers listed in the configuration.
Question #7Part 1Centralized management

If a secondary FortiManager device fails, what action must be taken to restore FortiManager HA manual mode to an operational state?

AThe FortiManager high availability (HA) state transition is transparent to administrators and does not require any reconfiguration.
BRun a sanity check on the failed device to make sure HA heartbeat packets are using TCP port 5199.
CManually promote one of the working secondary devices to the primary role.
DRemove the peer IP of the failed device on the primary device.
Question #8Part 1Centralized management

An administrator needs to configure and manage multiple objects in the FortiManager database and provide access to other users working in that same database. To retain control over firewall-policy changes made by other team members, the administrator requires a configuration in which every modification passes through a central review before it can be installed. How can the administrator set up this configuration?

AEnable the prompt asking the administrator to accept firewall policies changes before saving.
BEnable the workspace (for all ADOMs) to control all changes made by any administrator.
CEnable device lock and the advanced mode feature in the ADOM.
DEnable workflow mode and the ADOM lock feature.
Question #9Part 1Centralized management

What is recommended when managing a high volume of logs in your network?

AStore logs on FortiManager and use FortiView.
BAdd and manage FortiAnalyzer from FortiManager.
CEnable advanced ADOM mode on FortiManager.
DForward logs from FortiAnalyzer to FortiManager daily.
Question #10Part 1Centralized managementSelect 2

Refer to the exhibit. ![Question Image](https://cdn.examcademy.com/images/questions/1783897471806-rx1r5kgg.png) Which two outcomes result from the configuration shown in the exhibit? (Choose two.)

AUngraceful closed sessions will keep the ADOM in a locked state until the administrator session times out.
BThe administrator can lock policy blocks and FortiManager global ADOM.
CThe same administrator can lock more than one ADOM at the same time.
DThe administrator must have access to the ADOM to approve changes.
Question #11Part 1SD-WAN troubleshooting

Refer to the exhibits. ![Question Image](https://cdn.examcademy.com/images/questions/1784038313940-g0fipj89.png) ![Question Image](https://cdn.examcademy.com/images/questions/1784038320186-p7bfiv33.png) An administrator ran the Install Wizard and chose to install both the policy package and device settings. Why is the administrator unable to install the policy package on HQ-NGFW-1?

AThe administrator must change the Install on column from Installation Targets to HQ-NGFW-1.
BThe administrator must replace the interface Port6 with port6.
CThe administrator must use the admin user to install the policy package.
DThe administrator must remove the policy block assigned to HQ-NFFW-1.
Question #12Part 1Centralized management

Refer to the exhibits. ![Question Image](https://cdn.examcademy.com/images/questions/1783897456059-ki5dlm00.png) ![Question Image](https://cdn.examcademy.com/images/questions/1783897460436-xdjksvyg.png) An administrator had to restore every configuration associated with the user, Support. Those configurations were saved in configuration revision ID 9. The administrator reverted the configuration through the Configuration Revision History window and received the CLI output displayed in the exhibit. What can be concluded from this CLI output?

AThe administrator set the flag to 0 to prevent configuration overrides.
BThe administrator reinstalled the policy package.
CThe administrator needs to retrieve the device to correctly detect the FortiGate firmware version.
DThe administrator installed only the device-level configuration.
Question #13Part 1SD-WAN troubleshootingSelect 2

An administrator finds that CLI scripts are failing on certain FortiGate devices because the devices run different FortiOS versions. Which two actions should the administrator take to resolve the failing CLI scripts? *(Choose two.)*

ACreate separate ADOMs for each FortiOS version.
BDisable CLI scripts for devices using older firmware.
CModify the CLI scripts to include conditional commands based on FortiOS version.
DCreate version-specific CLI script groups and assign them to the appropriate devices.
Question #14Part 1Centralized management

Refer to the exhibits. ![Question Image](https://cdn.examcademy.com/images/questions/1783899741360-jkkh576d.png) ![Question Image](https://cdn.examcademy.com/images/questions/1783899745846-z6kw6uh8.png) An administrator added BR1-FGT-1 to FortiManager and began importing the policy package. During the process, the administrator saw that values must be selected from either FortiGate or FortiManager. Which conclusion is best supported by the exhibits?

ABR1-FGT-1 does not support the SSL/SSH profile with HTTPS on port 443.
BThe administrator must match the FortiOS firmware version with the FortiManager ADOM firmware version to resolve the conflict status.
CThe default Firewall Profile-Protocol-Options object is the only profile that does not significantly affect any configuration changes on either FortiManager or FortiGate.
DFortiManager has a different FortiGuard database compared to FortiGate BR1-FGT-1 for the QUIC protocol.
Question #15Part 1Centralized management

An administrator has a FortiGate-HQ device with the root, HR, and Facilities VDOMs, currently managed in FortiManager ADOM—Site1. The administrator attempts to move the HR VDOM to FortiManager ADOM—Site2, but the attempt fails. Why can the administrator not move the FortiGate-HQ HR VDOM to FortiManager ADOM—Site2?

AThe FortiGate-HQ must be managed under the FortiManager ADOM—root to allow moving its VDOMs to different ADOMs.
BThe administrator must have full access in the device layer of FortiGate-HQ VDOM-root before they can VDOMs to different ADOMs.
CFortiManager must be in ADOM normal mode, which does not allow VDOMs to be managed separately.
DThe administrator must delete the FortiGate-HQ device from FortiManager and add it again using the Add Device wizard before moving the VDOM.
Question #16Part 1Centralized managementSelect 2

What are two results of ADOM revisions? (Choose two.)

AADOM revisions can save the current state of the entire ADOM.
BADOM revisions do not increase the size of configuration backups.
CADOM revisions can save the current state of all policy packages and objects for an ADOM.
DADOM revisions appear in the Install Policy & Package Settings section of the install wizard.
Question #17Part 1Centralized management

Refer to the exhibits. ![Question Image](https://cdn.examcademy.com/images/questions/1783897461491-tc8ny9cu.png) ![Question Image](https://cdn.examcademy.com/images/questions/1783897465224-wtrw3bz0.png) An administrator runs the reload-failure command `diagnose test deploymanager reloadconf 262` on FortiManager. Why does the administrator get an error message?

AThe administrator must use the FortiGate name instead of the ID number.
BThe administrator just recently added FortiGate HQ-NGFW as a model device.
CFortiManager requires the FortiGate serial number instead of the ID number.
DFortiManager does not support FortiOS version 7.0.
Question #18Part 1Advanced IPsec

The administrator uses FortiManager to push a CLI script through the **Remote FortiGate Directly (via CLI)** option to configure an IPsec VPN. However, while executing the script, the administrator receives this error: `config vpn ipsec phase2-interface [parameter(s) invalid. detail: object mismatch]` What must the administrator do to resolve the script error and successfully apply the IPsec configuration?

AAdd the end command after finishing the IPsec phase 1-interface configuration block.
BUse IPsec templates to deploy provisioning templates.
CAdd a second config vpn ipsec phase2-interface block without linking it to phase1.
DRun the script using the policy package or ADOM database method.
Question #19Part 1Centralized managementSelect 2

Refer to the exhibit. ![Question Image](https://cdn.examcademy.com/images/questions/1783897474188-yvjcop6j.png) Which two statements regarding the output are true? (Choose two.)

AThe latest revision history for the managed FortiGate does not match the device-level database.
BConfiguration changes have been installed on FortiGate, updating policy and device-level database.
CThe latest revision history for the managed FortiGate does match the FortiManager policy database.
DThe system template default will override device-level database configurations.
Question #20Part 1SD-WAN troubleshooting

Refer to the exhibit. What conclusion can be drawn from the failed installation log shown?

APolicy ID 2 is installed in the disabled state.
BPolicy ID 2 will not be installed.
CPolicy ID 2 is installed without a source address.
DPolicy ID 2 is installed without the remote user student.
Question #21Part 1Centralized management

An administrator upgrades FortiManager to the latest version with workspace mode enabled per ADOM, but observes that the ADOM versions remain unchanged. Why were the ADOMs not upgraded?

AThe administrator did not run the database integrity check before performing the upgrade.
BFortiManager does not automatically upgrade ADOMs after a firmware upgrade.
CA FortiManager process task is stuck and blocking the ADOM upgrade, so the administrator must fix it.
DA user had all ADOMs locked before the upgrade, which stopped them from being upgraded.
Question #22Part 1Advanced IPsecSelect 2

What two outcomes are expected when both FortiManager and FortiGate are located behind network address translation (NAT) devices? (Choose two.)

ADuring discovery, the FortiManager NATed IP address is not set by default on FortiGate.
BFortiGate is discovered by FortiManager through the FortiGate NATed IP address.
CIf the FortiGate-FortiManager communication protocol (FGFM) tunnel is torn down, FortiManager will try to reestablish the FGFM tunnel.
DFortiGate can announce itself to FortiManager only if the FortiManager non-NATed IP address is configured on FortiGate under central management.
Question #23Part 1Centralized management

Refer to the exhibit. An administrator created a firewall address object that is used in multiple policy packages for several FortiGate devices in an ADOM. After the installation operation is complete, which IP/netmask is installed for the LAN firewall address object on Remote-Firewall [VDOM1]?

A21.21.2.5/255.255.255.255
B172.16.5.20/255.255.255.255
C172.16.5.0/255.255.255.0
D10.10.10.5/255.255.255.255
Question #24Part 1Centralized managementSelect 2

Push updates are failing on a FortiGate device that is located behind a network address translation (NAT) device. Which two settings should the administrator verify to resolve this issue? (Choose two.)

AMake sure the NAT device IP address and the correct ports are configured on FortiManager.
BMake sure FortiGuard updates and web service are enabled on the FortiGuard service interface.
CMake sure the virtual IP address and the correct ports are configured on the NAT device.
DMake sure the Bind to IP address option on the FortiGuard service interface is set to the virtual IP address from the NAT device.
Question #25Part 1Centralized managementSelect 2

Refer to the exhibit. ![Question Image](https://cdn.examcademy.com/images/questions/1783900380771-s56086yl.png) Which two actions occur when you run the script with the **Remote FortiGate Directly (via CLI)** option? *(Choose two.)*

AFortiManager will provide a preview of CLI commands before executing this script on a managed FortiGate.
BFortiManager will create a new revision history.
CFortiGate will auto-updated the FortiManager device-level database.
DYou will have to install these changes using the Install Wizard.
Question #26Part 1Centralized management

What enables FortiManager to execute CLI scripts on FortiGate devices without requesting SSH authentication every time?

AFortiGate devices using the legacy login method.
BThe secure management tunnel between FortiManager and FortiGate devices.
CThe script using the Remote FortiGate Directly (via CLI) option.
DThe script on the FortiManager device database.
Question #27Part 1Centralized management

An administrator created a new ADOM named Training for FortiGate devices only. The administrator then added the root FortiGate device of a Security Fabric group to the Training ADOM. Which statement correctly describes the expected result for the downstream devices in the Security Fabric, based on the administrator's actions?

AThe downstream devices are automatically authorized.
BThe downstream devices will appear in the Managed FortiGate section of the root ADOM.
CThe downstream devices show as unauthorized in the root ADOM.
DThe downstream devices must be added using the Add Device wizard.
Question #28Part 1Centralized managementSelect 2

Refer to the exhibit. ![Question Image](https://cdn.examcademy.com/images/questions/1784038321236-dlwm2t5u.png) What two results occur from the configuration displayed in the exhibit? (Choose two.)

AThe same administrator can lock more than one ADOM at the same time.
BMultiple administrators can lock and work on separate AOMs at the same time.
CAll changes must be approved before they can be installed on a device.
DConcurrent read-write access to an ADOM is disabled.
Question #29Part 1Centralized management

A FortiManager administrator has moved a FortiGate device into a new ADOM but cannot view that FortiGate’s policy or object configurations. What should the administrator do to view the policy or object configurations?

AUse ADOM shared objects to restore all missing data.
BReset the device and add it to the new ADOM again.
CImport the policy package manually using the Import Configuration wizard.
DUse ADOM sync to restore the missing configurations.
Question #30Part 1Centralized management

Refer to the exhibits. ![Question Image](https://cdn.examcademy.com/images/questions/1783897479651-8kmd7mg9.png) ![Question Image](https://cdn.examcademy.com/images/questions/1783897483241-mfaea8f7.png) An administrator has been asked to install the same policies from a central policy package onto the BR1-FGT-1 firewall. The administrator added BR1-FGT-1 as a target for the central policy package installation. What should the administrator do when reinstalling the central policy package on the BR1-FGT-1 firewall?

AAssign only one policy package to the firewall because FortiManager does not allow more than one policy package assigned per device at the same time.
BImport the policy package to change the unknown status and synchronize the policy package.
CUse the install wizard to install the central policy package on the BR1-FGT-1 firewall.
DFirst resolve the modified status in the configuration and provisioning templates to allow a smooth installation.
Question #31Part 1Centralized management

Refer to the exhibits. ![Question Image](https://cdn.examcademy.com/images/questions/1783900373649-wzeilll6.png) ![Question Image](https://cdn.examcademy.com/images/questions/1783900378479-szps9ivd.png) ![Question Image](https://cdn.examcademy.com/images/questions/1783900381943-r2qypdev.png) An administrator needs to replace the source **LAN** interface in policy ID 2 on their FortiGateRugged-70F. However, when attempting to install the policy package, they receive the error displayed in the exhibit. What should the administrator do to resolve the error?

AUse the API to assign a system template interface forFortiGateRugged-70F model.
BUse a metadata variable to dynamically assign an interface when this error occurs.
CCreate a per0device mapping for the LAN interface.
DReplace LAN with lan1, which is supported by FortiGateRugged-70F models.

📢 Unlock Full Access to Success!

"The content displayed here is a promotional preview and contains only 50% of the actual exam database. To access the complete set of updated questions, please upgrade to the Full Version."

👉 Click the button and follow the instructions to secure your full access immediately!