In R80.10, which policy manages the IPS Blade?
The IPS Blade is part of Check Point Threat Prevention and is managed through the Threat Prevention policy.
Master the Check Point Check Point Certified Security Expert Update - R80 (156-91580) certification exam with 25 realistic practice questions covering CCSE Update.
156-91580
$20.00
Click any option to test your knowledge, or reveal the verified answer and detailed explanation below each question.
The IPS Blade is part of Check Point Threat Prevention and is managed through the Threat Prevention policy.
IP spoofing falsifies a packet’s source IP address so the packet appears to have originated from an authorized IP address.
Gaia Clish configures the inactivity timeout withset inactivity-timeout <Timeout>. The timeout is specified in minutes for the Gaia command-line shell.
ClusterXL Full Sync transfers Security Gateway kernel-table information when a member initially joins or resynchronizes with a cluster. Thefwddaemon performs this operation through an encrypted TCP connection on port 256; UDP port 8116 is for Delta Sync.
Check Point MultiQueue mode 9 enables both Dynamic Dispatcher and Priority Queues together, distributing traffic more effectively across available processing resources and helping reduce packet drops caused by saturated CPU cores.
SecureXL accelerates traffic by handling established connections outside the normal firewall inspection path. Consequently, a standardfw monitorcapture can show only the initial packet of an accelerated stream. Check Point documentation notes that accelerated connections have limited visibility in FW Monitor, such as only the TCP SYN packet at the pre-inbound inspection point.
A unified Access Control policy that combines Firewall, Application Control & URL Filtering, Data Awareness, and Mobile Access requires an R80.10-or-later gateway. R77.x gateways use the legacy Mobile Access policy rather than the unified policy.
Delaying synchronization for short-lived HTTP connections reduces synchronization-interface load because connections that end before the delay are never synchronized, while longer-lived connections still retain state synchronization for failover. Check Point documents delayed synchronization for short-duration services such as HTTP, with a configurable delay range beginning at 2 seconds.
SOLR supports full-text indexing and search, including powerful query and matching capabilities.
Wire Mode bypasses firewall enforcement for traffic between trusted interfaces in a Wire Mode-enabled VPN community. Stateful inspection is therefore not enforced, allowing the VPN connection to continue without state tracking.
Session Rate Acceleration creates an acceleration template that omits (masks) the source-port tuple. New connections can therefore match the template despite a different source port, while the other relevant tuple attributes are still evaluated.
The Central Deployment Tool supports remote deployment of upgrade packages and hotfix packages to managed Security Gateways and Cluster Members. It can perform version upgrades, including automated cluster upgrade workflows, so its capability is not restricted to a specified release or only to hotfix packages.
SecureXL accelerates supported firewall processing and VPN encryption/decryption traffic paths, improving throughput for both non-encrypted firewall traffic and encrypted VPN traffic.
Thecpconfigutility provides the Check Point CoreXL configuration menu, including the configured number of CoreXL Firewall instances. CoreXL replicates the Firewall kernel into instances that run in parallel on CPU cores.
CoreXL Dynamic Dispatcher distributes new connections among Firewall instances based on CPU utilization, but VoIP traffic is not dynamically load-balanced and remains handled by the same CoreXL Firewall instance.
$FWDIR/conf/fwauthd.confdefines the Security Server user-space processes. Each entry includes the port on which the Security Server process listens, so it supplies the Security Server list together with port numbers.
Priority Delta is subtracted from the VRRP virtual router’s priority when a monitored interface fails, lowering its effective priority so another member with a higher effective priority can take over.Check Point Gaia Administration Guide: Configuring Advanced VRRP
Check Point QoS global properties configure rule weight, the unit used to display transmission rates, and authenticated-QoS timeout values. Schedules are configured for individual QoS rules, not as a global QoS property.
Suspicious Activity Monitoring (SAM) rules block connections to or from specified IP addresses and can be configured with a timeout that sets how long the block is enforced.
In R80.10, dbedit relies on CPMI, while the newer automation architecture uses the Management API throughmgmt_cli. CPMI remains available for some tables, but Access Control and Threat Prevention policies do not have a CPMI representation and must be managed withmgmt_cli; consequently, dbedit scripts are being replaced bymgmt_cli.
Check Point SmartEvent uses the SmartEvent Server and SmartEvent Correlation Unit components, which work with Log Servers. There is no SmartEvent blade or component named “SmartEvent Unit.”
Thecpinfoutility collects diagnostic information from a Check Point system into a support-information file, enabling Check Point Support to analyze the setup remotely.
The SmartEvent Correlation Unit analyzes log entries from Log Servers, identifies patterns according to the installed Event Policy, and generates events for detected security threats. [Check Point: Event Analysis](https://sc1.checkpoint.com/documents/R82/WebAdminGuides/EN/CP_R82_LoggingAndMonitoring_AdminGuide/Content/Topics-LMG/Event-Analysis.htm)
With Check Point CoreXL, each replicated Firewall-kernel instance runs on a CPU core and processes traffic concurrently, while all instances apply the same security policy.Check Point CoreXL documentation
In an Active-Active ClusterXL deployment, the Sticky Decision Function ensures that a connection continues to be processed by the same cluster member in both directions. This prevents asymmetric routing, in which the forward and return traffic could otherwise traverse different members.
Explore related CHECKPOINT exam dumps and free practice question banks.
"The content displayed here is a promotional preview and contains only 50% of the actual exam database. To access the complete set of updated questions, please upgrade to the Full Version."
👉 Click the button and follow the instructions to secure your full access immediately!