AZ-104: Microsoft Azure Administrator Part 3
Question #: 147
Topic #: 1
Your company has an Azure Active Directory (Azure AD) tenant that is configured for hybrid coexistence with the on-premises Active Directory domain.
The on-premise virtual environment consists of virtual machines (VMs) running on Windows Server 2012 R2 Hyper-V host servers.
You have created some PowerShell scripts to automate the configuration of newly created VMs. You plan to create several new VMs.
You need a solution that ensures the scripts are run on the new VMs.
Which of the following is the best solution?
A. Configure a SetupComplete.cmd batch file in the %windir%\setup\scripts directory.
B. Configure a Group Policy Object (GPO) to run the scripts as logon scripts.
C. Configure a Group Policy Object (GPO) to run the scripts as startup scripts.
D. Place the scripts in a new virtual hard disk (VHD).
Selected Answer: A
Question #: 148
Topic #: 5
You have an Azure subscription that contains a virtual network named VNET1. VNET1 contains the subnets shown in the following table.
Each virtual machine uses a static IP address.
You need to create network security groups (NSGs) to meet following requirements:
✑ Allow web requests from the internet to VM3, VM4, VM5, and VM6.
✑ Allow all connections between VM1 and VM2.
✑ Allow Remote Desktop connections to VM1.
✑ Prevent all other network traffic to VNET1.
What is the minimum number of NSGs you should create?
A. 1
B. 3
C. 4
D. 12
Selected Answer: A
Question #: 149
Topic #: 6
You have an Azure web app named App1.
You need to monitor the availability of App1 by using a multi-step web test.
What should you use in Azure Monitor?
A. Azure Service Health
B. Azure Application Insights
C. the Diagnostic settings
D. metrics
Selected Answer: B
Question #: 150
Topic #: 4
Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals. Some question sets might have more than one correct solution, while others might not have a correct solution.
After you answer a question in this section, you will NOT be able to return to it. As a result, these questions will not appear in the review screen.
You have an Azure subscription that contains the resources shown in the following table.
VM1 connects to VNET1.
You need to connect VM1 to VNET2.
Solution: You delete VM1. You recreate VM1, and then you create a new network interface for VM1 and connect it to VNET2.
Does this meet the goal?
A. Yes
B. No
Selected Answer: A
Question #: 152
Topic #: 1
Your company has an Azure Active Directory (Azure AD) tenant that is configured for hybrid coexistence with the on-premises Active Directory domain.
You plan to deploy several new virtual machines (VMs) in Azure. The VMs will have the same operating system and custom software requirements.
You configure a reference VM in the on-premise virtual environment. You then generalize the VM to create an image.
You need to upload the image to Azure to ensure that it is available for selection when you create the new Azure VMs.
Which PowerShell cmdlets should you use?
A. Add-AzVM
B. Add-AzVhd
C. Add-AzImage
D. Add-AzImageDataDisk
Selected Answer: B
Question #: 153
Topic #: 5
You have an Azure subscription that contains the resources shown in the following table.
The Not allowed resource types Azure policy that has policy enforcement enabled is assigned to RG1 and uses the following parameters:
Microsoft.Network/virtualNetworks
Microsoft.Compute/virtualMachines
In RG1, you need to create a new virtual machine named VM2, and then connect VM2 to VNET1.
What should you do first?
A. Remove Microsoft.Compute/virtualMachines from the policy.
B. Create an Azure Resource Manager template
C. Add a subnet to VNET1.
D. Remove Microsoft.Network/virtualNetworks from the policy.
Selected Answer: A
Question #: 154
Topic #: 2
You have an Azure subscription named Subscription1 that contains an Azure Log Analytics workspace named Workspace1.
You need to view the error events from a table named Event.
Which query should you run in Workspace1?
A. Get-Event Event | where {$_.EventType == “error”}
B. search in (Event) “error”
C. select * from Event where EventType == “error”
D. search in (Event) * | where EventType -eq “error”
Selected Answer: B
Question #: 155
Topic #: 4
Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals. Some question sets might have more than one correct solution, while others might not have a correct solution.
After you answer a question in this section, you will NOT be able to return to it. As a result, these questions will not appear in the review screen.
You have an Azure subscription that contains the resources shown in the following table.
VM1 connects to VNET1.
You need to connect VM1 to VNET2.
Solution: You turn off VM1, and then you add a new network interface to VM1.
Does this meet the goal?
A. Yes
B. No
Selected Answer: B
Question #: 156
Topic #: 3
You have an Azure subscription named Subscription1.
You have 5 TB of data that you need to transfer to Subscription1.
You plan to use an Azure Import/Export job.
What can you use as the destination of the imported data?
A. a virtual machine
B. an Azure Cosmos DB database
C. Azure File Storage
D. the Azure File Sync Storage Sync Service
Selected Answer: C
Question #: 161
Topic #: 5
Your company has an Azure subscription named Subscription1.
The company also has two on-premises servers named Server1 and Server2 that run Windows Server 2016. Server1 is configured as a DNS server that has a primary DNS zone named adatum.com. Adatum.com contains 1,000 DNS records.
You manage Server1 and Subscription1 from Server2. Server2 has the following tools installed:
✑ The DNS Manager console
✑ Azure PowerShell
✑ Azure CLI 2.0
You need to move the adatum.com zone to an Azure DNS zone in Subscription1. The solution must minimize administrative effort.
What should you use?
A. Azure CLI
B. Azure PowerShell
C. the Azure portal
D. the DNS Manager console
Selected Answer: A
Question #: 162
Topic #: 6
You have a Recovery Services vault named RSV1. RSV1 has a backup policy that retains instant snapshots for five days and daily backup for 14 days.
RSV1 performs daily backups of VM1. VM1 hosts a static website that was updated eight days ago.
You need to recover VM1 to a point eight days ago. The solution must minimize downtime.
What should you do first?
A. Deallocate VM1.
B. Restore VM1 by using the Replace existing restore configuration option.
C. Delete VM1.
D. Restore VM1 by using the Create new restore configuration option.
Selected Answer: B
Question #: 165
Topic #: 1
Note: The question is included in a number of questions that depicts the identical set-up. However, every question has a distinctive result. Establish if the solution satisfies the requirements.
Your company’s Azure subscription includes two Azure networks named VirtualNetworkA and VirtualNetworkB.
VirtualNetworkA includes a VPN gateway that is configured to make use of static routing. Also, a site-to-site VPN connection exists between your company’s on- premises network and VirtualNetworkA.
You have configured a point-to-site VPN connection to VirtualNetworkA from a workstation running Windows 10. After configuring virtual network peering between
VirtualNetworkA and VirtualNetworkB, you confirm that you are able to access VirtualNetworkB from the company’s on-premises network. However, you find that you cannot establish a connection to VirtualNetworkB from the Windows 10 workstation.
You have to make sure that a connection to VirtualNetworkB can be established from the Windows 10 workstation.
Solution: You choose the Allow gateway transit setting on VirtualNetworkA.
Does the solution meet the goal?
A. Yes
B. No
Selected Answer: B
Question #: 166
Topic #: 2
You have an Azure subscription named Subscription1. Subscription1 contains the resource groups in the following table.
RG1 has a web app named WebApp1. WebApp1 is located in West Europe.
You move WebApp1 to RG2.
What is the effect of the move?
A. The App Service plan for WebApp1 remains in West Europe. Policy2 applies to WebApp1.
B. The App Service plan for WebApp1 moves to North Europe. Policy2 applies to WebApp1.
C. The App Service plan for WebApp1 remains in West Europe. Policy1 applies to WebApp1.
D. The App Service plan for WebApp1 moves to North Europe. Policy1 applies to WebApp1.
Selected Answer: A
Question #: 167
Topic #: 5
You have a public load balancer that balances ports 80 and 443 across three virtual machines named VM1, VM2, and VM3.
You need to direct all the Remote Desktop Protocol (RDP) connections to VM3 only.
What should you configure?
A. an inbound NAT rule
B. a new public load balancer for VM3
C. a frontend IP configuration
D. a load balancing rule
Selected Answer: A
Question #: 168
Topic #: 3
You have an Azure Storage account named storage1.
You plan to use AzCopy to copy data to storage1.
You need to identify the storage services in storage1 to which you can copy the data.
Which storage services should you identify?
A. blob, file, table, and queue
B. blob and file only
C. file and table only
D. file only
E. blob, table, and queue only
Selected Answer: B
Question #: 173
Topic #: 1
Note: The question is included in a number of questions that depicts the identical set-up. However, every question has a distinctive result. Establish if the solution satisfies the requirements.
Your company’s Azure subscription includes two Azure networks named VirtualNetworkA and VirtualNetworkB.
VirtualNetworkA includes a VPN gateway that is configured to make use of static routing. Also, a site-to-site VPN connection exists between your company’s on- premises network and VirtualNetworkA.
You have configured a point-to-site VPN connection to VirtualNetworkA from a workstation running Windows 10. After configuring virtual network peering between
VirtualNetworkA and VirtualNetworkB, you confirm that you are able to access VirtualNetworkB from the company’s on-premises network. However, you find that you cannot establish a connection to VirtualNetworkB from the Windows 10 workstation.
You have to make sure that a connection to VirtualNetworkB can be established from the Windows 10 workstation.
Solution: You choose the Allow gateway transit setting on VirtualNetworkB.
Does the solution meet the goal?
A. Yes
B. No
Selected Answer: B
Question #: 174
Topic #: 4
You deploy an Azure Kubernetes Service (AKS) cluster named Cluster1 that uses the IP addresses shown in the following table.
You need to provide internet users with access to the applications that run in Cluster1.
Which IP address should you include in the DNS record for Cluster1?
A. 131.107.2.1
B. 10.0.10.11
C. 172.17.7.1
D. 192.168.10.2
Selected Answer: A
Question #: 177
Topic #: 1
Note: The question is included in a number of questions that depicts the identical set-up. However, every question has a distinctive result. Establish if the solution satisfies the requirements.
Your company’s Azure subscription includes two Azure networks named VirtualNetworkA and VirtualNetworkB.
VirtualNetworkA includes a VPN gateway that is configured to make use of static routing. Also, a site-to-site VPN connection exists between your company’s on- premises network and VirtualNetworkA.
You have configured a point-to-site VPN connection to VirtualNetworkA from a workstation running Windows 10. After configuring virtual network peering between
VirtualNetworkA and VirtualNetworkB, you confirm that you are able to access VirtualNetworkB from the company’s on-premises network. However, you find that you cannot establish a connection to VirtualNetworkB from the Windows 10 workstation.
You have to make sure that a connection to VirtualNetworkB can be established from the Windows 10 workstation.
Solution: You download and re-install the VPN client configuration package on the Windows 10 workstation.
Does the solution meet the goal?
A. Yes
B. No
Selected Answer: A
Question #: 178
Topic #: 2
You have an Azure subscription.
Users access the resources in the subscription from either home or from customer sites. From home, users must establish a point-to-site VPN to access the Azure resources. The users on the customer sites access the Azure resources by using site-to-site VPNs.
You have a line-of-business-app named App1 that runs on several Azure virtual machine. The virtual machines run Windows Server 2016.
You need to ensure that the connections to App1 are spread across all the virtual machines.
What are two possible Azure services that you can use? Each correct answer presents a complete solution.
NOTE: Each correct selection is worth one point.
A. an internal load balancer
B. a public load balancer
C. an Azure Content Delivery Network (CDN)
D. Traffic Manager
E. an Azure Application Gateway
Selected Answer: AB
Question #: 179
Topic #: 4
You have a deployment template named Template1 that is used to deploy 10 Azure web apps.
You need to identify what to deploy before you deploy Template1. The solution must minimize Azure costs.
What should you identify?
A. five Azure Application Gateways
B. one App Service plan
C. 10 App Service plans
D. one Azure Traffic Manager
E. one Azure Application Gateway
Selected Answer: B
Question #: 180
Topic #: 3
You have an Azure subscription that contains an Azure Storage account.
You plan to create an Azure container instance named container1 that will use a Docker image named Image1. Image1 contains a Microsoft SQL Server instance that requires persistent storage.
You need to configure a storage service for Container1.
What should you use?
A. Azure Files
B. Azure Blob storage
C. Azure Queue storage
D. Azure Table storage
Selected Answer: A
Question #: 184
Topic #: 1
Your company has virtual machines (VMs) hosted in Microsoft Azure. The VMs are located in a single Azure virtual network named VNet1.
The company has users that work remotely. The remote workers require access to the VMs on VNet1.
You need to provide access for the remote workers.
What should you do?
A. Configure a Site-to-Site (S2S) VPN.
B. Configure a VNet-toVNet VPN.
C. Configure a Point-to-Site (P2S) VPN.
D. Configure DirectAccess on a Windows Server 2012 server VM.
E. Configure a Multi-Site VPN
Selected Answer: C
Question #: 185
Topic #: 2
You have an Azure subscription.
You have 100 Azure virtual machines.
You need to quickly identify underutilized virtual machines that can have their service tier changed to a less expensive offering.
Which blade should you use?
A. Monitor
B. Advisor
C. Metrics
D. Customer insights
Selected Answer: B
Question #: 186
Topic #: 3
You have an app named App1 that runs on two Azure virtual machines named VM1 and VM2.
You plan to implement an Azure Availability Set for App1. The solution must ensure that App1 is available during planned maintenance of the hardware hosting
VM1 and VM2.
What should you include in the Availability Set?
A. one update domain
B. two fault domains
C. one fault domain
D. two update domains
Selected Answer: D
Question #: 188
Topic #: 1
Note: The question is included in a number of questions that depicts the identical set-up. However, every question has a distinctive result. Establish if the solution satisfies the requirements.
Your company has a Microsoft SQL Server Always On availability group configured on their Azure virtual machines (VMs).
You need to configure an Azure internal load balancer as a listener for the availability group.
Solution: You create an HTTP health probe on port 1433.
Does the solution meet the goal?
A. Yes
B. No
Selected Answer: B
Question #: 189
Topic #: 4
You have an Azure subscription that contains a virtual machine named VM1. VM1 hosts a line-of-business application that is available 24 hours a day. VM1 has one network interface and one managed disk. VM1 uses the D4s v3 size.
You plan to make the following changes to VM1:
✑ Change the size to D8s v3.
✑ Add a 500-GB managed disk.
✑ Add the Puppet Agent extension.
✑ Enable Desired State Configuration Management.
Which change will cause downtime for VM1?
A. Enable Desired State Configuration Management
B. Add a 500-GB managed disk
C. Change the size to D8s v3
D. Add the Puppet Agent extension
Selected Answer: C
Question #: 190
Topic #: 6
You have an Azure subscription named Subscription1 that contains two Azure virtual networks named VNet1 and VNet2. VNet1 contains a VPN gateway named
VPNGW1 that uses static routing. There is a site-to-site VPN connection between your on-premises network and VNet1.
On a computer named Client1 that runs Windows 10, you configure a point-to-site VPN connection to VNet1.
You configure virtual network peering between VNet1 and VNet2. You verify that you can connect to VNet2 from the on-premises network. Client1 is unable to connect to VNet2.
You need to ensure that you can connect Client1 to VNet2.
What should you do?
A. Select Use the remote virtual network’s gateway or Route Server on VNet1 to VNet2 peering.
B. Select Use the remote virtual network s gateway or Route Server on VNet2 to VNet1 peering.
C. Download and re-install the VPN client configuration package on Client1.
D. Enable BGP on VPNGW1.
Selected Answer: C
Question #: 191
Topic #: 5
You have an Azure subscription that contains the resources in the following table.
VM1 and VM2 are deployed from the same template and host line-of-business applications.
You configure the network security group (NSG) shown in the exhibit. (Click the Exhibit tab.)
You need to prevent users of VM1 and VM2 from accessing websites on the Internet over TCP port 80.
What should you do?
A. Disassociate the NSG from a network interface
B. Change the Port_80 inbound security rule.
C. Associate the NSG to Subnet1.
D. Change the DenyWebSites outbound security rule.
Selected Answer: C
Question #: 192
Topic #: 3
You have an Azure subscription named Subscription1.
You have 5 TB of data that you need to transfer to Subscription1.
You plan to use an Azure Import/Export job.
What can you use as the destination of the imported data?
A. an Azure Cosmos DB database
B. Azure Blob storage
C. Azure Data Lake Store
D. the Azure File Sync Storage Sync Service
Selected Answer: B
Question #: 195
Topic #: 1
Note: The question is included in a number of questions that depicts the identical set-up. However, every question has a distinctive result. Establish if the solution satisfies the requirements.
Your company has a Microsoft SQL Server Always On availability group configured on their Azure virtual machines (VMs).
You need to configure an Azure internal load balancer as a listener for the availability group.
Solution: You set Session persistence to Client IP.
Does the solution meet the goal?
A. Yes
B. No
Selected Answer: B
Question #: 196
Topic #: 5
You have two subscriptions named Subscription1 and Subscription2. Each subscription is associated to a different Azure AD tenant.
Subscription1 contains a virtual network named VNet1. VNet1 contains an Azure virtual machine named VM1 and has an IP address space of 10.0.0.0/16.
Subscription2 contains a virtual network named VNet2. VNet2 contains an Azure virtual machine named VM2 and has an IP address space of 10.10.0.0/24.
You need to connect VNet1 to VNet2.
What should you do first?
A. Move VM1 to Subscription2.
B. Move VNet1 to Subscription2.
C. Modify the IP address space of VNet2.
D. Provision virtual network gateways.
Selected Answer: D
Question #: 197
Topic #: 4
You have an app named App1 that runs on an Azure web app named webapp1.
The developers at your company upload an update of App1 to a Git repository named Git1.
Webapp1 has the deployment slots shown in the following table.
You need to ensure that the App1 update is tested before the update is made available to users.
Which two actions should you perform? Each correct answer presents part of the solution.
NOTE: Each correct selection is worth one point.
A. Swap the slots
B. Deploy the App1 update to webapp1-prod, and then test the update
C. Stop webapp1-prod
D. Deploy the App1 update to webapp1-test, and then test the update
E. Stop webapp1-test
Selected Answer: AD
Question #: 198
Topic #: 2
You have an Azure Active Directory (Azure AD) tenant named contoso.onmicrosoft.com.
The User administrator role is assigned to a user named Admin1.
An external partner has a Microsoft account that uses the user1@outlook.com sign in.
Admin1 attempts to invite the external partner to sign in to the Azure AD tenant and receives the following error message: `Unable to invite user user1@outlook.com `” Generic authorization exception.`
You need to ensure that Admin1 can invite the external partner to sign in to the Azure AD tenant.
What should you do?
A. From the Users settings blade, modify the External collaboration settings.
B. From the Custom domain names blade, add a custom domain.
C. From the Organizational relationships blade, add an identity provider.
D. From the Roles and administrators blade, assign the Security administrator role to Admin1.
Selected Answer: A
Question #: 200
Topic #: 1
Note: The question is included in a number of questions that depicts the identical set-up. However, every question has a distinctive result. Establish if the solution satisfies the requirements.
Your company has a Microsoft SQL Server Always On availability group configured on their Azure virtual machines (VMs).
You need to configure an Azure internal load balancer as a listener for the availability group.
Solution: You enable Floating IP.
Does the solution meet the goal?
A. Yes
B. No
Selected Answer: A
Question #: 201
Topic #: 2
You have an Azure subscription linked to an Azure Active Directory tenant. The tenant includes a user account named User1.
You need to ensure that User1 can assign a policy to the tenant root management group.
What should you do?
A. Assign the Owner role for the Azure Subscription to User1, and then modify the default conditional access policies.
B. Assign the Owner role for the Azure subscription to User1, and then instruct User1 to configure access management for Azure resources.
C. Assign the Global administrator role to User1, and then instruct User1 to configure access management for Azure resources.
D. Create a new management group and delegate User1 as the owner of the new management group.
Selected Answer: C
Question #: 202
Topic #: 4
You have an Azure subscription named Subscription1 that has the following providers registered:
✑ Authorization
✑ Automation
✑ Resources
✑ Compute
✑ KeyVault
✑ Network
✑ Storage
✑ Billing
✑ Web
Subscription1 contains an Azure virtual machine named VM1 that has the following configurations:
✑ Private IP address: 10.0.0.4 (dynamic)
✑ Network security group (NSG): NSG1
✑ Public IP address: None
✑ Availability set: AVSet
✑ Subnet: 10.0.0.0/24
✑ Managed disks: No
✑ Location: East US
You need to record all the successful and failed connection attempts to VM1.
Which three actions should you perform? Each correct answer presents part of the solution.
NOTE: Each correct selection is worth one point.
A. Enable Azure Network Watcher in the East US Azure region.
B. Add an Azure Network Watcher connection monitor.
C. Register the MicrosoftLogAnalytics provider.
D. Create an Azure Storage account.
E. Register the Microsoft.Insights resource provider.
F. Enable Azure Network Watcher flow logs.
Selected Answer: DEF
Question #: 203
Topic #: 6
You have an Azure Active Directory (Azure AD) tenant that is linked to 10 Azure subscriptions.
You need to centrally monitor user activity across all the subscriptions.
What should you use?
A. Azure Application Insights Profiler
B. access reviews
C. Activity log filters
D. a Log Analytics workspace
Selected Answer: D
Question #: 204
Topic #: 5
You plan to create an Azure virtual machine named VM1 that will be configured as shown in the following exhibit.
The planned disk configurations for VM1 are shown in the following exhibit.
You need to ensure that VM1 can be created in an Availability Zone.
Which two settings should you modify? Each correct answer presents part of the solution.
NOTE: Each correct selection is worth one point.
A. Use managed disks
B. OS disk type
C. Availability options
D. Size
E. Image
Selected Answer: AC
Question #: 209
Topic #: 1
Your company has two on-premises servers named SRV01 and SRV02. Developers have created an application that runs on SRV01. The application calls a service on SRV02 by IP address.
You plan to migrate the application on Azure virtual machines (VMs). You have configured two VMs on a single subnet in an Azure virtual network.
You need to configure the two VMs with static internal IP addresses.
What should you do?
A. Run the New-AzureRMVMConfig PowerShell cmdlet.
B. Run the Set-AzureSubnet PowerShell cmdlet.
C. Modify the VM properties in the Azure Management Portal.
D. Modify the IP properties in Windows Network and Sharing Center.
E. Run the Set-AzureStaticVNetIP PowerShell cmdlet.
Selected Answer: E
Question #: 210
Topic #: 4
You need to deploy an Azure virtual machine scale set that contains five instances as quickly as possible.
What should you do?
A. Deploy five virtual machines. Modify the Availability Zones settings for each virtual machine.
B. Deploy five virtual machines. Modify the Size setting for each virtual machine.
C. Deploy one virtual machine scale set that is set to VM (virtual machines) orchestration mode.
D. Deploy one virtual machine scale set that is set to ScaleSetVM orchestration mode.
Selected Answer: D
Question #: 214
Topic #: 1
Your company has an Azure Active Directory (Azure AD) subscription.
You need to deploy five virtual machines (VMs) to your company’s virtual network subnet.
The VMs will each have both a public and private IP address. Inbound and outbound security rules for all of these virtual machines must be identical.
Which of the following is the least amount of network interfaces needed for this configuration?
A. 5
B. 10
C. 20
D. 40
Selected Answer: A
Question #: 215
Topic #: 6
You have a subnet named Subnet1 that contains Azure virtual machines. A network security group (NSG) named NSG1 is associated to Subnet1. NSG1 only contains the default rules.
You need to create a rule in NSG1 to prevent the hosts on Subnet1 form connecting to the Azure portal. The hosts must be able to connect to other internet hosts.
To what should you set Destination in the rule?
A. Application security group
B. IP Addresses
C. Service Tag
D. Any
Selected Answer: C
Question #: 216
Topic #: 4
You plan to create the Azure web apps shown in the following table.
What is the minimum number of App Service plans you should create for the web apps?
A. 1
B. 2
C. 3
D. 4
Selected Answer: B
Question #: 219
Topic #: 2
Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals. Some question sets might have more than one correct solution, while others might not have a correct solution.
After you answer a question in this section, you will NOT be able to return to it. As a result, these questions will not appear in the review screen.
You need to ensure that an Azure Active Directory (Azure AD) user named Admin1 is assigned the required role to enable Traffic Analytics for an Azure subscription.
Solution: You assign the Network Contributor role at the subscription level to Admin1.
Does this meet the goal?
A. Yes
B. No
Selected Answer: B
Question #: 220
Topic #: 1
Your company has an Azure Active Directory (Azure AD) subscription.
You need to deploy five virtual machines (VMs) to your company’s virtual network subnet.
The VMs will each have both a public and private IP address. Inbound and outbound security rules for all of these virtual machines must be identical.
Which of the following is the least amount of security groups needed for this configuration?
A. 4
B. 3
C. 2
D. 1
Selected Answer: D
Question #: 221
Topic #: 6
You have an Azure subscription named Subscription1 that contains an Azure Log Analytics workspace named Workspace1.
You need to view the error events from a table named Event.
Which query should you run in Workspace1?
A. search in (Event) “error”
B. Event | where EventType is “error”
C. select * from Event where EventType == “error”
D. Get-Event Event | where {$_.EventType == “error”}
Selected Answer: A
Question #: 222
Topic #: 5
Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals. Some question sets might have more than one correct solution, while others might not have a correct solution.
After you answer a question in this section, you will NOT be able to return to it. As a result, these questions will not appear in the review screen.
You have a computer named Computer1 that has a point-to-site VPN connection to an Azure virtual network named VNet1. The point-to-site connection uses a self-signed certificate.
From Azure, you download and install the VPN client configuration package on a computer named Computer2.
You need to ensure that you can establish a point-to-site VPN connection to VNet1 from Computer2.
Solution: You modify the Azure Active Directory (Azure AD) authentication policies.
Does this meet the goal?
A. Yes
B. No
Selected Answer: B
Question #: 223
Topic #: 1
Your company’s Azure subscription includes Azure virtual machines (VMs) that run Windows Server 2016.
One of the VMs is backed up every day using Azure Backup Instant Restore.
When the VM becomes infected with data encrypting ransomware, you decide to recover the VM’s files.
Which of the following is TRUE in this scenario?
A. You can only recover the files to the infected VM.
B. You can recover the files to any VM within the company’s subscription.
C. You can only recover the files to a new VM.
D. You will not be able to recover the files.
Selected Answer: B
Question #: 224
Topic #: 2
Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals. Some question sets might have more than one correct solution, while others might not have a correct solution.
After you answer a question in this section, you will NOT be able to return to it. As a result, these questions will not appear in the review screen.
You need to ensure that an Azure Active Directory (Azure AD) user named Admin1 is assigned the required role to enable Traffic Analytics for an Azure subscription.
Solution: You assign the Owner role at the subscription level to Admin1.
Does this meet the goal?
A. Yes
B. No
Selected Answer: A
Question #: 225
Topic #: 3
You have two Azure virtual machines named VM1 and VM2. You have two Recovery Services vaults named RSV1 and RSV2.
VM2 is backed up to RSV1.
You need to back up VM2 to RSV2.
What should you do first?
A. From the RSV1 blade, click Backup items and stop the VM2 backup
B. From the RSV2 blade, click Backup. From the Backup blade, select the backup for the virtual machine, and then click Backup
C. From the VM2 blade, click Disaster recovery, click Replication settings, and then select RSV2 as the Recovery Services vault
D. From the RSV1 blade, click Backup Jobs and export the VM2 job
Selected Answer: A
Question #: 226
Topic #: 6
You have an Azure App Service web app named App1.
You need to collect performance traces for App1.
What should you use?
A. Azure Application Insights Profiler
B. the Activity log
C. the Deployment center
D. the Diagnose and solve problems settings
Selected Answer: A
Question #: 227
Topic #: 5
Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals. Some question sets might have more than one correct solution, while others might not have a correct solution.
After you answer a question in this section, you will NOT be able to return to it. As a result, these questions will not appear in the review screen.
You have a computer named Computer1 that has a point-to-site VPN connection to an Azure virtual network named VNet1. The point-to-site connection uses a self-signed certificate.
From Azure, you download and install the VPN client configuration package on a computer named Computer2.
You need to ensure that you can establish a point-to-site VPN connection to VNet1 from Computer2.
Solution: You join Computer2 to Azure Active Directory (Azure AD).
Does this meet the goal?
A. Yes
B. No
Selected Answer: B
Question #: 228
Topic #: 4
Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals. Some question sets might have more than one correct solution, while others might not have a correct solution.
After you answer a question in this section, you will NOT be able to return to it. As a result, these questions will not appear in the review screen.
You have an Azure subscription named Subscription1. Subscription1 contains a resource group named RG1. RG1 contains resources that were deployed by using templates.
You need to view the date and time when the resources were created in RG1.
Solution: From the Subscriptions blade, you select the subscription, and then click Programmatic deployment.
Does this meet the goal?
A. Yes
B. No
Selected Answer: B
Question #: 229
Topic #: 1
Your company’s Azure subscription includes Azure virtual machines (VMs) that run Windows Server 2016.
One of the VMs is backed up every day using Azure Backup Instant Restore.
When the VM becomes infected with data encrypting ransomware, you are required to restore the VM.
Which of the following actions should you take?
A. You should restore the VM after deleting the infected VM.
B. You should restore the VM to any VM within the company’s subscription.
C. You should restore the VM to a new Azure VM.
D. You should restore the VM to an on-premise Windows device.
Selected Answer: C
Question #: 230
Topic #: 2
Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals. Some question sets might have more than one correct solution, while others might not have a correct solution.
After you answer a question in this section, you will NOT be able to return to it. As a result, these questions will not appear in the review screen.
You need to ensure that an Azure Active Directory (Azure AD) user named Admin1 is assigned the required role to enable Traffic Analytics for an Azure subscription.
Solution: You assign the Reader role at the subscription level to Admin1.
Does this meet the goal?
A. Yes
B. No
Selected Answer: A
Question #: 231
Topic #: 4
Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals. Some question sets might have more than one correct solution, while others might not have a correct solution.
After you answer a question in this section, you will NOT be able to return to it. As a result, these questions will not appear in the review screen.
You have an Azure subscription that contains the resources shown in the following table.
VM1 connects to VNET1.
You need to connect VM1 to VNET2.
Solution: You create a new network interface, and then you add the network interface to VM1.
Does this meet the goal?
A. Yes
B. No
Selected Answer: B
Question #: 232
Topic #: 6
You have an Azure subscription that contains the storage accounts shown in the following table.
You deploy a web app named App1 to the West US Azure region.
You need to back up App1. The solution must minimize costs.
Which storage account should you use as the target for the backup?
A. storage1
B. storage2
C. storage3
D. storage4
Selected Answer: B
Question #: 233
Topic #: 5
Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals. Some question sets might have more than one correct solution, while others might not have a correct solution.
After you answer a question in this section, you will NOT be able to return to it. As a result, these questions will not appear in the review screen.
You have an Azure subscription that contains 10 virtual networks. The virtual networks are hosted in separate resource groups.
Another administrator plans to create several network security groups (NSGs) in the subscription.
You need to ensure that when an NSG is created, it automatically blocks TCP port 8080 between the virtual networks.
Solution: You create a resource lock, and then you assign the lock to the subscription.
Does this meet the goal?
A. Yes
B. No
Selected Answer: B
Question #: 234
Topic #: 3
You have a general-purpose v1 Azure Storage account named storage1 that uses locally-redundant storage (LRS).
You need to ensure that the data in the storage account is protected if a zone fails. The solution must minimize costs and administrative effort.
What should you do first?
A. Create a new storage account.
B. Configure object replication rules.
C. Upgrade the account to general-purpose v2.
D. Modify the Replication setting of storage1.
Selected Answer: C
