MB-330: Microsoft Dynamics 365 Supply Chain Management

Question #: 101
Topic #: 4
HOTSPOT –
A company plans to use Dynamics 365 Supply Chain Management to automatically calculate and process royalties.
You need to configure the system.
Which actions should you perform? To answer, select the appropriate options in the answer area.
NOTE: Each correct selection is worth one point.
Hot Area:

Suggestion Answer:

Question #: 102
Topic #: 3
DRAG DROP –
A company implements warehouse locations in Dynamics 365 Supply Chain Management.
You need to configure location directives for inventory movement.
Which configurations should you use? To answer, drag the appropriate strategies to the correct requirements. Each strategy may be used once, more than once, or not at all. You may need to drag the split bar between panes or scroll to view content.
NOTE: Each correct selection is worth one point.
Select and Place:

Suggestion Answer:

Question #: 103
Topic #: 5
HOTSPOT –
A company must set up replenishment of inventory using vendor-owned consignment inventory.
You need to create the replenishment order.
How should you complete the replenishment order? To answer, select the appropriate options in the answer area.
NOTE: Each correct selection is worth one point.
Hot Area:

Suggestion Answer:

Question #: 104
Topic #: 6
DRAG DROP –
A company implements Dynamics 365 Supply Chain Management.
The company needs to improve the reliability of their forecasting data.
You need to implement demand forecasting to meet the requirements.
What should you do? To answer, drag the appropriate actions to the correct requirements. Each action may be used once, more than once, or not at all. You may need to drag the split bar between panes or scroll to view content.
NOTE: Each correct selection is worth one point.
Select and Place:

Suggestion Answer:

Question #: 105
Topic #: 1
You need to consider the underlined segment to establish whether it is accurate.
A quarantine order that a status of Started, means that the item is not yet in the quarantine warehouse.

A. No adjustment required.
B. Created
C. Reported as finished
D. Ended

Selected Answer: B

Question #: 106
Topic #: 2
Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals. Some question sets might have more than one correct solution, while others might not have a correct solution.
After you answer a question in this section, you will NOT be able to return to it. As a result, these questions will not appear in the review screen.
You are the purchasing manager at a manufacturing company that makes audio equipment.
You sign an agreement with a vendor to purchase 5,000 speaker cables, item C0001, at a discounted rate of $3.00 per cable. This agreement expires in exactly one year.
You need to set up pricing information and track the fulfillment of the agreement.
Solution: Create a purchase agreement for the vendor that specifies a product quantity commitment. Include the quantity, the price, and the expiration date.
Does the solution meet the goal?

A. Yes
B. No

Selected Answer: A

Question #: 107
Topic #: 6
DRAG DROP –
A company is implementing Dynamics 365 Supply Chain Management.
You need to determine which planning engine meets each business requirement.
Which planning engine should you use for each requirement? To answer, drag the appropriate planning engines to the correct requirements. Each planning engine may be used once, more than once, or not at all. You may need to drag the split bar between panes or scroll to view content.
NOTE: Each correct selection is worth one point.
Select and Place:

Suggestion Answer:

Question #: 108
Topic #: 3
DRAG DROP –
You are the quality supervisor for a company. You receive 100 units of item C0001.
You find defects in some units. You move the items to quarantine for further inspection. Fifty units fail inspection.
You need to scrap the defective units.
Which four actions should you perform in sequence? To answer, move the appropriate actions from the list of actions to the answer area and arrange them in the correct order.
Select and Place:

Suggestion Answer:

Question #: 109
Topic #: 1
You need to consider the underlined segment to establish whether it is accurate.
Inventory adjustment journals allow for adding cost to an item when you add inventory, and then automatically posts the additional cost to be a specific general ledger account.

A. No adjustment required.
B. Tag counting
C. Movement
D. Transfer

Selected Answer: A

Question #: 110
Topic #: 5
A warehouse picks and ships product.
The warehouse completes work immediately upon automatic release to the warehouse.
You need to configure waves to allow for automatic work creation.
What should you do?

A. Select the wave template and attribute to automatically process.
B. Release to warehouse and process the work.
C. Automate wave creation and process the wave at release to warehouse.
D. Automate wave creation and automatically process work.

Selected Answer: D

Question #: 111
Topic #: 2
A distribution company wants to set up barcodes in their Dynamics 365 Supply Chain Management system for warehouse scanning.
Barcodes will be entered manually.
You need to minimize the risk of errors on barcode entry.
What should you do?

A. Create a new barcode, enter the value, select the type, and enter the mask.
B. Select an item, select the barcode type, select max length, and enter the value.
C. Select an item and set up security on the barcode field.
D. Create a new barcode, enter the value, select the type, and enter the size and max length.

Selected Answer: A

Question #: 112
Topic #: 4
A client wants to use Dynamics 365 Supply Chain Management to assist processing intercompany trade.
You need to ensure that intercompany sales order payments process correctly when intercompany payable journals are posted.
What should you do?

A. In the intercompany trade parameters for sales order policies, select Post journal automatically
B. In the intercompany trade parameters for purchase order policies, select Post invoice automatically
C. In the intercompany trade parameters for purchase order policies, select Post journal automatically
D. In the intercompany trade parameters for sales order policies, select Allow summary update of documents for original customer

Selected Answer: D

Question #: 113
Topic #: 6
DRAG DROP –
A company uses Dynamics 365 Supply Chain Management with master planning.
The company needs to enable planning optimization functionality to improve master planning processes.
You need to advise which prerequisites the company must fulfill to enable planning optimization.
What must the company do? To answer, drag the appropriate types to the correct prerequisites. Each type may be used once, or not at all. You may need to drag the split bar between panes or scroll to view content.
NOTE: Each correct selection is worth one point.
Select and Place:

Suggestion Answer:

Question #: 114
Topic #: 3
HOTSPOT –
A company sells a new product line. Buyers purchase a large shipment into the distribution center.
The product must be divided among the retail stores equally.
You need to configure buyer push functionality.
Which configuration options should you use? To answer, select the appropriate options in the answer area.
NOTE: Each correct selection is worth one point.
Hot Area:

Suggestion Answer:

Question #: 115
Topic #: 2
DRAG DROP –
A company uses Dynamics 365 Supply Chain Management for purchasing and sales operations across three different sites.
The default order settings for products are configured as shown in the following table.

You need to determine which scenarios allow transactions.
Which transactions are allowed? To answer, drag the appropriate allowed options to the correct scenarios. Each allowed option may be used once, more than once, or not at all. You may need to drag the split bar between panes or scroll to view content.
NOTE: Each correct selection is worth one point.
Select and Place:

Suggestion Answer:

Question #: 116
Topic #: 5
DRAG DROP –
A company plans to implement Dynamics 365 Supply Chain Management mobile device connectivity.
You need to perform a spot cycle count on the mobile device.
Which three actions should you perform in sequence? To answer, move the appropriate actions from the list of actions to the answer area and arrange them in the correct order.
Select and Place:

Suggestion Answer:

Question #: 117
Topic #: 4
You are the customer relations manager at a wholesale company.
You perform promotion planning and must track fund usage.
You need to set up a trade allowance agreement to register and track promotion contracts.
Which two items should you set up prior to creating the agreement? Each correct answer presents part of the solution.
NOTE: Each correct selection is worth one point.

A. Sales category hierarchy
B. Opportunity reasons
C. Customer category hierarchy
D. Trade allowance funds

Selected Answer: CD

Question #: 118
Topic #: 1
Your company makes use of a Dynamics 365 Supply Chain Management system.
You are tasked with amending inventory. Additionally, the existing item posting configuration must be overridden.
You make use of the inventory adjustment journal.
Does the action achieve your objective?

A. Yes, it does
B. No, it does not

Selected Answer: B

Question #: 119
Topic #: 4
DRAG DROP –
A company wants to expand their purchasing power by enhancing their current procurement catalog in Dynamics 365 Supply Chain Management.
The company wants to redirect to external websites to help build their purchase requisitions.
You need to set up an external catalog.
Which three actions should you perform in sequence? To answer, move the appropriate actions from the list of actions to the answer area and arrange them in the correct order.
Select and Place:

Suggestion Answer:

Question #: 120
Topic #: 6
DRAG DROP –
A manufacturing company uses Dynamics 365 Supply Chain Management.
You must update the safety stock level for raw materials.
You need to calculate and process minimum coverage proposals based on data from historical transactions.
Which three actions should you perform in sequence? To answer, move the appropriate actions from the list of actions to the answer area and arrange them in the correct order.
Select and Place:

Suggestion Answer:

Question #: 121
Topic #: 5
DRAG DROP –
A company uses Dynamics 365 Supply Chain Management with basic warehouse processes. Mobile devices are not used in the two warehouses. Warehouse items that have an A classification are counted weekly through automatic cycle count journals that are created per warehouse.
Items that are in both warehouses appear only in one journal for counting. Counts are inaccurate because picking is posted against items that are being counted.
You need to resolve the cycle count issues. To answer, drag the appropriate configurations to the correct requirements. Each configuration may be used once, more than once, or not at all. You may need to drag the split bar between panes or scroll to view content.
NOTE: Each correct selection is worth one point.
Select and Place:

Suggestion Answer:

Question #: 122
Topic #: 3
DRAG DROP –
You are implementing Dynamics 365 Supply Chain Management.
A user reports that some of the quarantine statuses appear to mean the same thing.
You need to explain the status of quarantine orders by the location of the item.
What is the status of the orders based on the location of the item? To answer, drag the appropriate statuses to the correct steps. Each status may be used once, more than once, or not at all. You may need to drag the split bar between panes or scroll to view content.
NOTE: Each correct selection is worth one point.
Select and Place:

Suggestion Answer:

Question #: 123
Topic #: 1
Your company makes use of a Dynamics 365 Supply Chain Management system.
You are tasked with amending inventory. Additionally, the existing item posting configuration must be overridden.
You make use of the counting journal.
Does the action achieve your objective?

A. Yes, it does
B. No, it does not

Selected Answer: B

Question #: 124
Topic #: 2
A company sells jars of sliced or whole pickles. The company produces jars of various sizes.
You need to set up the item to ensure that pickles have a single item number for all container sizes.
What are two possible ways to achieve this goal? Each correct answer presents a complete solution.
NOTE: Each correct selection is worth one point.

A. Setup the size, color, and style in each legal entity. Go to the products form, create a new product and assign it to each dimension.
B. Create a new product master with predefined variant configuration technology and release to the legal entities. Use the product dimensions to define the size, color, and style.
C. Create and release a product to the legal entities. Use the storage dimensions to define the size, color, and style.
D. Create a new product master with dimension-based configuration technology and release to the legal entities. Use the configuration to define the size, color, and style.

Selected Answer: BD

Question #: 125
Topic #: 6
HOTSPOT –
A company implements Dynamics 365 Supply Chain Management.
You complete the prerequisites to implement the master planning optimization.
You need to configure the planning optimization feature.
What should you do? To answer, select the appropriate options in the answer area.
NOTE: Each correct selection is worth one point.
Hot Area:

Suggestion Answer:

Question #: 126
Topic #: 4
DRAG DROP –
A company uses Dynamics 365 Supply Chain Management.
You must implement commission groups to match commission rates to products.
You need to configure commission tracking.
Which three actions should you perform in sequence? To answer, move the appropriate actions from the list of actions to the answer area and arrange them in the correct order.
NOTE: More than one order of answer choices is correct. You will receive credit for any of the correct orders you select.
Select and Place:

Suggestion Answer:

Question #: 127
Topic #: 5
You are implementing warehousing in Dynamics 365 Supply Chain Management.
You need to configure and approve one warehouse that can be used to create additional warehouses.
What should you use?

A. inventory and warehouse management parameter setup
B. warehouse management parameter setup only
C. warehouse work template
D. warehouse configuration template

Selected Answer: D

Question #: 128
Topic #: 2
A company manufactures street, mountain, and racing bicycles.
The company wants to use product variants to control bicycle configuration.
You need to configure the bicycles in the system.
What should you do?

A. Create mountain, street, and racing bicycles as separate configuration models.
B. Use one item number for all types of bicycles. Use a separate configuration number for each type of bicycle.
C. Use different item numbers for mountain, street, and racing bicycles.

Selected Answer: B

Question #: 129
Topic #: 1
Your company makes use of a Dynamics 365 Supply Chain Management system.
You are tasked with amending inventory. Additionally, the existing item posting configuration must be overridden.
You make use of the movement journal.
Does the action achieve your objective?

A. Yes, it does
B. No, it does not

Selected Answer: A

Question #: 130
Topic #: 3
A company runs out of inventory in warehouse 22 but has overstock in warehouse 11. The warehouses are linked to the same site.
The inventory must be moved from warehouse 11 to warehouse 22. The company must retain ownership of the inventory financially and be able to generate reports as to where the inventory value resides at all times.
You need to create an order to move the stock.
What should you do?

A. Create a transfer order from the transit warehouse to warehouse 22.
B. Create a transfer order from warehouse 11 to the transit warehouse.
C. Create a transfer order from warehouse 11 to warehouse 22.
D. Create a sales order for warehouse 11 and a purchase order for warehouse 22.

Selected Answer: B

Question #: 131
Topic #: 5
DRAG DROP –
A client uses Dynamics 365 Supply Chain Management.
You need to configure automatic freight reconciliation.
Which configuration options should you use? To answer, drag the appropriate configuration options to the correct requirements. Each configuration option may be used once, more than once, or not at all. You may need to drag the split bar between panes or scroll to view content.
NOTE: Each correct selection is worth one point.
Select and Place:

Suggestion Answer:

Question #: 132
Topic #: 4
HOTSPOT –
A company hires four sales representatives for a region named Midwest.
You must configure commission calculations for the sales representatives in the Midwest region. The calculations must meet the following requirements:
✑ Calculate commissions for all items sold to customers at a rate of 10 percent of total revenue earned on a sales order.
✑ Apply commissions for all customers in the Midwest Customer group for commission.
✑ Split commissions equally between the representatives.
You need to configure a commission calculation that meets these requirements.
How should you configure the calculation? To answer, select the appropriate options in the answer area.
NOTE: Each correct selection is worth one point.
Hot Area:

Suggestion Answer:

Question #: 133
Topic #: 6
HOTSPOT –
A company that has three legal entities is implementing Dynamics 365 Supply Chain Management.
One legal entity supplies the other two legal entities as customers with inventory. Intercompany master planning must be set up and run in the least amount of time.
You need to configure the system to meet the requirements.
What should you configure? To answer, select the appropriate options in the answer area.
NOTE: Each correct selection is worth one point.
Hot Area:

Suggestion Answer:

Question #: 134
Topic #: 3
HOTSPOT –
A company must ship product from one warehouse, receive it in another, and account for the inventory. It will take two days for the shipment to travel between locations.
You need to set up and process the transfer between the two warehouses.
How should you complete the setup? To answer, select the appropriate options in the answer area.
NOTE: Each correct selection is worth one point.
Hot Area:

Suggestion Answer:

Question #: 135
Topic #: 2
A company implements the Dynamics 365 Supply Chain Management procurement module.
During testing, you observe that no transactions are posted to the product receipt journal when an item is received.
You need to configure the system to show the appropriate transactions in the product receipt journal.
Which two actions should you perform? Each correct answer presents part of the solution.
NOTE: Each correct selection is worth one point.

A. On the Item group setup form, enter account information in the Purchase, accrual and Purchase expenditure, un-invoiced account fields.
B. On the Item model group setup form, select Include physical value.
C. On the Item group setup form, enter account information in the Purchase, accrual and Purchase expenditure for product fields.
D. On the Item model group setup form, select Accrue liability on product receipt.

Selected Answer: AD

Question #: 136
Topic #: 1
Your company uses Dynamics 365 Supply Chain Management to manage its warehouse.
Users report that the inventory for several items in the warehouse is inaccurate.
You are required to ensure that users in the warehouse can verify and rectify the on-hand inventory.
Which of the following actions should you take?

A. You should implement the production input journal type.
B. You should implement the movement journal type.
C. You should implement the counting journal type.
D. You should implement the item arrival journal type.

Selected Answer: C

Question #: 137
Topic #: 6
HOTSPOT –
You are configuring the period templates that are used for inventory inquiries. Today’s date is November 3, 2020.
The period templates configuration is shown in the following graphic. You set the value for the Direction field to backward.

Use the drop-down menus to select the answer choice that answers each question based on the information presented in the graphic.
NOTE: Each correct selection is worth one point.
Hot Area:

Suggestion Answer:

Question #: 138
Topic #: 5
A company has several warehouse locations. The company acquires a new warehouse.
You must design a new warehouse process workflow for the new warehouse.
You need to configure the workflow.
Which three options should you configure? Each correct answer presents part of the solution.
NOTE: Each correct selection is worth one point.

A. work pools
B. cluster picking
C. outbound wave processing
D. work templates
E. wave templates

Selected Answer: CDE

Question #: 139
Topic #: 1
A corporation has two subsidiary businesses, set up as separate legal entities. The one business will be purchasing a new item from the other, and has negotiated for a discount for the first six months of the deal.
You are required to make sure that system will apply the discount for the time stipulated.
Which of the following is the type of agreement you should configure?

A. Sale Agreement.
B. Service Agreement.
C. Purchase Agreement.
D. Trade Agreement.

Selected Answer: D

Question #: 140
Topic #: 4
A company uses Dynamics 365 Supply Chain Management and implements procurement categories.
Purchase requisitions are required for the purchase of procurement category goods.
You need to ensure that the company purchases office supplies only from one specific vendor.
Which two actions should you perform? Each correct answer presents part of the solution.
NOTE: Each correct selection is worth one point.

A. Add the preferred vendor to the office supplies procurement category setup
B. Create a preferred trade agreement for the office supplies vendor
C. In purchasing policies, configure a specific category policy for office supplies
D. In purchasing policies, create a Purchase requisition control rule
E. Configure the purchase requisition workflow to specify the office supplies vendor

Selected Answer: AC

Question #: 141
Topic #: 3
Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals. Some question sets might have more than one correct solution, while others might not have a correct solution.
After you answer a question in this section, you will NOT be able to return to it. As a result, these questions will not appear in the review screen.
A company is implementing inventory management in Dynamics 365 Supply Chain Management.
The company needs to block inventory and ensure that physical inventory will not be reserved by other outbound transactions.
You need to select the appropriate option to block the inventory in the system.
Solution: Configure a blocking cause in the inventory setup configuration.
Does the solution meet the goal?

A. Yes
B. No

Selected Answer: B

Question #: 142
Topic #: 3
DRAG DROP –
A company uses Dynamics 365 Supply Chain Management.
You need to perform month-end close processes.
At which process steps should you perform the actions? To answer, drag the appropriate process steps to the appropriate actions. Each process step may be used once, more than once, or not at all. You may need to drag the split bar between panes or scroll to view content.
NOTE: Each correct selection is worth one point.
Select and Place:

Suggestion Answer:

Question #: 143
Topic #: 5
DRAG DROP –
A company uses Dynamics 365 Supply Chain Management. The company plans to streamline their receiving process for shipments that arrive daily.
You need to set up inbound shipment processing.
In which order should you perform the actions? To answer, move the appropriate actions from the list of actions to the answer area and arrange them in the correct order.
NOTE: More than one order of answer choices is correct. You will receive credit for any of the correct orders you select.
Select and Place:

Suggestion Answer:

Question #: 144
Topic #: 6
HOTSPOT –
A client uses master planning in Dynamics 365 Supply Chain Management.
The client wants to make sure that the item coverage groups are configured properly.
You need to validate the configurations.
Which configurations should you validate for each scenario? To answer, select the appropriate options in the answer area.
NOTE: Each correct selection is worth one point.
Hot Area:

Suggestion Answer:

Question #: 145
Topic #: 1
Your company makes use of a Dynamics 365 Supply Chain Management system.
You are in the process of configuring royalty agreement. You are currently identifying the royalty agreement ledger accounts.
Which two of the following ledger accounts should be identified?

A. Accounts receivable
B. Accrual
C. Inventory
D. Expense

Selected Answer: BD

Question #: 146
Topic #: 4
Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals. Some question sets might have more than one correct solution, while others might not have a correct solution.
After you answer a question in this section, you will NOT be able to return to it. As a result, these questions will not appear in the review screen.
A vendor is offering a rebate program on bottles of wine that have purchase orders placed within a month. There is a $5.00 rebate on the purchase of 10-100 bottles and a $6.00 rebate for the purchase of 101-200 bottles. Customers can purchase wine by the bottle or by the case. Discounts apply to all varieties of wine sold by the vendor.
You need to create a vendor rebate agreement to ensure that the correct rebate amount is claimed at the end of the month.
Solution: On the rebate agreement, specify each item group assigned to wine. Add a rebate line break of quantity 10-100 and a second rebate line break of quantity 101-200.
Does the solution meet the goal?

A. Yes
B. No

Selected Answer: B

Question #: 147
Topic #: 6
HOTSPOT –
A company uses Dynamics 365 Supply Chain Management for master planning in manufacturing processes.
Master planning runs have increased in processing time over the past month.
You need to identify the impact of configuration changes on performance from a single location.
Which objects should you use? To answer, select the appropriate options in the answer area.
NOTE: Each correct selection is worth one point.
Hot Area:

Suggestion Answer:

Question #: 148
Topic #: 4
Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals. Some question sets might have more than one correct solution, while others might not have a correct solution.
After you answer a question in this section, you will NOT be able to return to it. As a result, these questions will not appear in the review screen.
A vendor is offering a rebate program on bottles of wine that have purchase orders placed within a month. There is a $5.00 rebate on the purchase of 10-100 bottles and a $6.00 rebate for the purchase of 101-200 bottles. Customers can purchase wine by the bottle or by the case. Discounts apply to all varieties of wine sold by the vendor.
You need to create a vendor rebate agreement to ensure that the correct rebate amount is claimed at the end of the month.
Solution: On the rebate agreement, set the calculation date type field to created.
Does the solution meet the goal?

A. Yes
B. No

Selected Answer: B

Question #: 149
Topic #: 3
A company uses Dynamics 365 Supply Chain Management.
An employee notices a discrepancy in inventory.
You need to create the inventory blocking transaction.
What are two possible ways to achieve the goal? Each correct answer presents a complete solution.
NOTE: Each correct selection is worth one point.

A. inventory status
B. quality order
C. batch disposition code
D. manual inventory blocking

Selected Answer: BD

Question #: 150
Topic #: 1
Your company makes use of a Dynamics 365 Supply Chain Management system.
You are in the process of configuring royalty agreement. You need to make sure that royalty claim is generated every time a sales order is fulfilled.
Which two of the following is the option you should choose for the Cumulate sales by field?

A. Invoice
B. Fulfilled
C. Active
D. Shipped

Selected Answer: A