MB-330: Microsoft Dynamics 365 Supply Chain Management

Question #: 52
Topic #: 10
HOTSPOT –
Employee3 needs to schedule deliveries.
How should Employee3 plan for a carrier to deliver goods to Store2? To answer, select the appropriate options in the answer area.
NOTE: Each correct selection is worth one point.
Hot Area:

Suggestion Answer:

Question #: 53
Topic #: 5
A company plans to use the warehouse mobile app for cluster picking.
The system must break the cluster when stocking items.
You need to configure the system.
What should you do?

A. On the Mobile device menu items form, select an option for the Directed by field.
B. On the Cluster profile form, add a value to the Sequence Put-away field.
C. On the Cluster profile form, add a value to the Break cluster at field.
D. On the Mobile device menu items form, add a value for the Work type ג€” Put-away field.

Selected Answer: C

Question #: 54
Topic #: 2
An employee at a company needs to lay out the various component to build custom bicycles.
You need to identify which constraints the employee should use to set up the bicycles.
Which two types of constraints the employee use? Each correct answer presents a complete solution.
NOTE: Each correct selection is worth one point.

A. table constraints that are used generically among product configuration models
B. expression constraints that are used generically among product configuration models
C. expression constraints that are unique to each product configuration model
D. table constraints that are always unique to each product configuration model

Selected Answer: CD

Question #: 55
Topic #: 19
You need to resolve the issue for UserC.
What should you do?

A. Change the inventory status only.
B. Change the inventory status and run the replenishment process.
C. Change the inventory status and complete a movement journal.
D. Create a transfer order and change the inventory status.

Selected Answer: D

Question #: 56
Topic #: 18
You need to identify the cause for the inventory issue reported by customer service representatives.
What is the root cause?

A. Run inventory close process.
B. Ordered reserved box should be checked, this will disable quantities.
C. Turn on automatic reservation.
D. Ordered reserved quantity is due to marking.
E. Turn off automatic reservation.

Selected Answer: D

Question #: 57
Topic #: 13
You need to identify all potential gaps in the master planning solution for Adventure Works’ implementation.
What should you do?

A. Read the release notes and master planning entries in the Microsoft Ideas portal.
B. Finish relevant material requirements planning system configurations and data imports and run a fit analysis.
C. Identify the gaps through the known issues in Lifecycle Services.
D. Upload all task recordings for MRP business processes into Azure DevOps for analysis.

Selected Answer: B

Question #: 58
Topic #: 4
Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals. Some question sets might have more than one correct solution, while others might not have a correct solution.
After you answer a question in this section, you will NOT be able to return to it. As a result, these questions will not appear in the review screen.
A company has an agreement to pay royalties to a third party for use of their logo.
A royalty contract must be setup so that the third party paid monthly. The payment is based on invoiced sales.
You need to create a royalty contract and create monthly Accounts payable to the third party.
Solution: Create a royalty claim in Accounts receivable. Set up the third party as a customer to be paid royalties for use of the logo.
Does the solution meet the goal?

A. Yes
B. No

Selected Answer: B

Question #: 59
Topic #: 1
Your company uses a Dynamics 365 Supply Chain Management system.
You have been tasked with configuring an agreement that gives clients a specified discount per unit if they buy a certain amount of a particular item.
The parameters are as follows:
✑ 51 to 100 `” 10 %/unit
✑ 101 and more `” 15 %/unit
You configure a trade agreement.
Does the action achieve your objective?

A. Yes, it does
B. No, it does not

Selected Answer: B

Question #: 60
Topic #: 7
You need to configure the system to support the pottery line.
What should you do first?

A. Set up a new product with product configuration.
B. Create a new product with tracking dimensions.
C. Create a new product master with pre-defined product variants.
D. Create a new product with storage dimensions.

Selected Answer: C

Question #: 61
Topic #: 6
DRAG DROP –
A manufacturing company is setting up a new warehouse.
The warehouse must store a product that is currently stored in another warehouse.
You need to create new item coverage for the warehouse.
Which four actions should you perform in sequence? To answer, move the appropriate actions from the list of actions to the answer area and arrange them in the correct order.
Select and Place:

Suggestion Answer:

Question #: 62
Topic #: 18
HOTSPOT –
You need to configure the system to meet the item testing requirements.
How should you configure the system? To answer, select the appropriate options in the answer area.
NOTE: Each correct selection is worth one point.
Hot Area:

Suggestion Answer:

Question #: 63
Topic #: 10
HOTSPOT –
You need to configure transport providers for delivering products to the retail stores from Vendor1.
How should you complete the configuration? To answer, select the appropriate options in the answer area.
NOTE: Each correct selection is worth one point.
Hot Area:

Suggestion Answer:

Question #: 64
Topic #: 5
HOTSPOT –
A company needs to stock inventory in their warehouse. Inbound purchase order materials may need to be placed into more than one location in the warehouse.
You need to configure placement for inventory in the warehouse.
How should you set up location directives? To answer, select the appropriate options in the answer area.
NOTE: Each correct selection is worth one point.
Hot Area:

Suggestion Answer:

Question #: 65
Topic #: 13
HOTSPOT –
You need to implement business processes to address concerns about the wheel inventory.
Which features should you use? To answer, select the appropriate option in the answer area.
NOTE: Each correct selection is worth one point.
Hot Area:

Suggestion Answer:

Question #: 66
Topic #: 2
HOTSPOT –
You are configuring pricing for a new item.
Wholesale customers must pay $10.00 for order quantities of up to 9 units. All other customers receive a static price of $14.00 regardless of quantity.
You need to configure sales trade agreements.
In Trade Agreement Setup, which actions should you perform? To answer, select the appropriate options in the answer area.
NOTE: Each correct selection is worth one point.
Hot Area:

Suggestion Answer:

Question #: 67
Topic #: 4
A company manufactures and sells custom bicycles. Customers can customize some components to create a custom bicycle.
You need to configure sales orders to support the customization allowed for custom bicycle orders.
What are two possible ways to achieve this goal? Each correct answer presents a complete solution.
NOTE: Each correct selection is worth one point.

A. Create a sales order for the bicycle and make configuration selections on the order for the upgraded seat and handlebars. The production order will be automatically generated with the correct seat and handlebars.
B. Create a sales order for the bicycle and add separate line items for the upgraded seat and handlebars.
C. Create a sales order for the bicycle. Modify the production order after it has been reported as finished to delete the standard seat and handlebars and add the upgraded seat and handlebars.
D. Configure the product to allow for the seat and handlebars selection to be defined at order creation, automatically adding an upcharge to the sales price.

Selected Answer: AD

Question #: 68
Topic #: 3
A company is implementing sales order functionality in Dynamics 365 Supply Chain Management.
The company has a business requirement to fulfill sales orders by using direct delivery.
You need to enter a direct delivery sales order so that a purchase order is automatically created.
What should you do after you enter the sales order and lines?

A. Set the ship complete toggle to On and confirm the order on the sales order header.
B. Select automatic and confirm the sales order on the line level setup tab in the reservation field.
C. Change the site to direct delivery and confirm the sales order.
D. Select the direct delivery option under the sales order action pane and complete the form.

Selected Answer: D

Question #: 69
Topic #: 1
Your company recently implemented a Dynamics 365 Supply Chain Management system.
You are currently configuring costing methods for items in inventory. You need to make use of a method normally used for items that have a limited shelf life.
Which of the following is the costing method you should use?

A. Standard
B. FIFO
C. Average
D. Specific

Selected Answer: B

Question #: 70
Topic #: 13
HOTSPOT –
You need to configure the replenishment of the bicycle parts.
Which configurations should you use? To answer, select the appropriate option in the answer area.
NOTE: Each correct selection is worth one point.
Hot Area:

Suggestion Answer:

Question #: 71
Topic #: 5
DRAG DROP –
A company uses the Dynamics 365 Supply Chain Management Warehouse management module.
The company requires production waves to be processed in batch.
You need to configure wave processing.
In which order should you perform the actions? To answer, move all actions from the list of actions to the answer area and arrange them in the correct order.
Select and Place:

Suggestion Answer:

Question #: 72
Topic #: 2
HOTSPOT –
.
An airport uses Dynamics 365 Supply Chain Management. You purchase new baggage-sorting hardware
You must add both the hardware and the service contract for the hardware to the product hierarchy.
You need to configure the category node.
What should you do? To answer, select the appropriate options in the answer area.
NOTE: Each correct selection is worth one point.
Hot Area:

Suggestion Answer:

Question #: 73
Topic #: 4
HOTSPOT –
A company implements Dynamics 365 Sales to manage sales prospects.
A salesperson must create a customer record for a new client in Dynamics 365 Supply Chain Management.
You need to create a sales order from an existing quote.
What should you do? To answer, select the appropriate options in the answer area.
NOTE: Each correct selection is worth one point.
Hot Area:

Suggestion Answer:

Question #: 74
Topic #: 10
You need to complete the shipments.

A. Confirm the load and generate packing slips and bills of lading.
B. Create waves to generate work for shipping loads and send an ASN.
C. Confirm shipments and generate pick/put work.
D. Create work for printing shipping documents and send an ASN.

Selected Answer: A

Question #: 75
Topic #: 6
A company operates a chain of retail coffee shops and a distribution center. Each coffee shop and the distribution center are distinct warehouses.
Cups and lids are replenished from a single distribution center.
You need to configure store replenishment for coffee cup lids.
Which three actions should you perform? Each correct answer presents part of the solution.
NOTE: Each correct selection is worth one point.

A. Set the coverage plan by dimension for warehouse on the Storage dimension group.
B. Set the minimum item coverage to the safety stock quantity. Set the maximum to the maximum quantity of stock to reorder above the safety stock quantity.
C. Set the minimum item coverage to the safety stock quantity. Set the maximum item coverage to 0.
D. Create a coverage group assignment for the item.
E. Set the minimum item coverage to 0. Set the maximum item coverage to the number of lids to keep on hand.

Selected Answer: ABD

Question #: 76
Topic #: 3
Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals. Some question sets might have more than one correct solution, while others might not have a correct solution.
After you answer a question in this section, you will NOT be able to return to it. As a result, these questions will not appear in the review screen.
A company is implementing inventory management in Dynamics 365 Supply Chain Management.
The company needs to block inventory and ensure that physical inventory will not be reserved by other outbound transactions.
You need to select the appropriate option to block the inventory in the system.
Solution: Select the full blocking option in the item sampling page.
Does the solution meet the goal?

A. Yes
B. No

Selected Answer: B

Question #: 77
Topic #: 6
HOTSPOT –
A company uses Dynamics 365 Supply Chain Management to sell consumer electronics to retailers across North America.
An inventory manager needs to view purchase orders by different periods of time for all warehouses.
If there are insufficient orders for expected demand, the manager must create new purchase or transfer orders to meet the demand versus the current on-hand inventory that is already allocated for future demand.
The company also needs to keep a surplus of 5 percent of inventory for unexpected demand.
You need to identify a solution to meet these requirements.
Which feature should you use for each requirement? To answer, select the appropriate options in the answer area.
NOTE: Each correct selection is worth one point.
Hot Area:

Suggestion Answer:

Question #: 78
Topic #: 5
DRAG DROP –
You need to implement location directives in Dynamics 365 Supply Chain Management.
Which objects should you use? To answer, drag the appropriate objects to the correct permissions. Each object may be used once, more than once, or not at all.
You may need to drag the split bar between panes or scroll to view content.
NOTE: Each correct selection is worth one point.
Select and Place:

Suggestion Answer:

Question #: 79
Topic #: 13
HOTSPOT –
You need to implement the master planning solution for Adventure Works.
Which solutions should you use? To answer, select the appropriate option in the answer area.
NOTE: Each correct selection is worth one point.
Hot Area:

Suggestion Answer:

Question #: 80
Topic #: 4
A company manufactures and sells surround-sound audio systems. A third-party company manufactures the stereo receivers as part of the Bill of materials (BOM) for complete sound systems.
You need to automatically create a purchase order for the stereo receiver from the production order for a sound system.
Which three actions should you perform? Each correct answer presents part of the solution.
NOTE: Each correct selection is worth one point.

A. Assign the Vendor account to the service item BOM line.
B. Set service item BOM line type to Vendor.
C. Set the service item BOM line type to Pegged supply.
D. Link the service items to the vendor on the costing sheet.
E. Attach the service item to the parent item as a BOM line.

Selected Answer: ABE

Question #: 81
Topic #: 3
Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals. Some question sets might have more than one correct solution, while others might not have a correct solution.
After you answer a question in this section, you will NOT be able to return to it. As a result, these questions will not appear in the review screen.
A company is implementing inventory management in Dynamics 365 Supply Chain Management.
The company needs to block inventory and ensure that physical inventory will not be reserved by other outbound transactions.
You need to select the appropriate option to block the inventory in the system.
Solution: Create a quality order on the quality orders page for the quantity to be blocked.
Does the solution meet the goal?

A. Yes
B. No

Selected Answer: B

Question #: 82
Topic #: 2
A company manufactures and sells speaker boxes. The speaker boxes can be silver or black with a basic or upgraded wiring harness assembly.
The speaker box must be created in the item master so that the variables for colors and harness type can be assigned at order entry.
You need to create a new item that supports multiple variables.
What should you do?

A. Create a new product. Select predefined variant as the configuration technology.
B. Create a new product master. Select constraint-based configuration as the configuration technology.
C. Create a new product. Select constraint-based configuration as the configuration technology.
D. Create a new product master. Select predefined variant as the configuration technology.

Selected Answer: D

Question #: 83
Topic #: 1
During testing of your company’s new implementation of the Dynamics 365 Supply Chain Management procurement module, you notice that, when an item is received, transactions aren’t posted to the product receipt journal.
You need to resolve this issue.
Which of the following actions should you take on the Item model group setup form?

A. You should consider un-checking the Include physical value checkbox.
B. You should consider checking the Include physical value checkbox.
C. You should consider un-checking the Accrue liability on product receipt checkbox.
D. You should consider checking the Accrue liability on product receipt checkbox.

Selected Answer: D

Question #: 84
Topic #: 5
DRAG DROP –
A company plans to use warehouse management and dock appointment scheduling in Dynamics 365 Supply Chain Management.
You need to configure the system.
Which configuration options should you use? To answer, drag the appropriate configuration options to the correct requirements. Each configuration option may be used once, more than once, or not at all. You may need to drag the split bar between panes or scroll to view content.
NOTE: Each correct selection is worth one point.
Select and Place:

Suggestion Answer:

Question #: 85
Topic #: 4
HOTSPOT –
A primary vendor tells you that their purchase order (PO) items will be delivered seven days later than expected. You find another vendor that carries the product and can deliver it the next day.
You need the purchases from both vendors, but only one PO exists in the system.
You need to ensure that the system correctly reflects the inbound products from both vendors.
How should you complete the setup? To answer, select the appropriate options in the answer area.
NOTE: Each correct selection is worth one point.
Hot Area:

Suggestion Answer:

Question #: 86
Topic #: 1
A manufacturing establishment makes use of a Dynamics 365 Supply Chain Management system.
To accelerate setup, they use bill of materials (BOM) templates.
Which of the following is TRUE with regards to template BOMs? (Choose all that apply.)

A. You can only apply a single template BOM to a service object.
B. You can apply many template BOMs to a service object.
C. You can modify or delete lines in a BOM template regardless of whether the template has been associated to a service object, or not.
D. You can modify or delete lines in a BOM template as long as the template has not been associated to a service object.

Selected Answer: AD

Question #: 87
Topic #: 6
A company uses planning optimization in Dynamics 365 Supply Chain Management. Automatic firming is enabled.
Some of the planned purchase orders are not being firmed as expected. The inventory planners therefore need to manually process planned purchase orders.
You need to include the planned purchase orders in automatic firming.
What are two possible configurations you can use? Each correct answer presents a complete solution.
NOTE: Each correct selection is worth one point.

A. Lead Time
B. Automatic firming time fence (days)
C. Requirements Date
D. Freeze time fence on master plan

Selected Answer: AB

Question #: 88
Topic #: 2
A company has items in inventory with two costing methods: FIFO and Standard.
The company needs to calculate the cost of all items at month end and provide a total inventory value to the finance department.
You need to determine the total value of inventory.
Which costing method requires running the inventory close?

A. FIFO and Standard Cost items
B. FIFO items only
C. LIFO, Moving Average, and Date Weighted Average items
D. Standard Cost items only

Selected Answer: B

Question #: 89
Topic #: 3
Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals. Some question sets might have more than one correct solution, while others might not have a correct solution.
After you answer a question in this section, you will NOT be able to return to it. As a result, these questions will not appear in the review screen.
A company is implementing inventory management in Dynamics 365 Supply Chain Management.
The company needs to block inventory and ensure that physical inventory will not be reserved by other outbound transactions.
You need to select the appropriate option to block the inventory in the system.
Solution: Manually create a transaction on the inventory blocking page.
Does the solution meet the goal?

A. Yes
B. No

Selected Answer: B

Question #: 90
Topic #: 4
HOTSPOT –
A company has several vendors who require 1099s.
You need to set up the vendors so that year-end reports can be correctly generated.
What should you do? To answer, select the appropriate options in the answer area.
NOTE: Each correct selection is worth one point.
Hot Area:

Suggestion Answer:

Question #: 91
Topic #: 5
HOTSPOT –
A company creates loads to ship sales orders.
Loads must be shipped by using the lowest freight rates possible.
You need to use the load planning workbench to create a load for sales order shipments.
Which configuration options should you use? To answer, select the appropriate options in the answer area.
NOTE: Each correct selection is worth one point.
Hot Area:

Suggestion Answer:

Question #: 92
Topic #: 3
HOTSPOT –
Inventory in a warehouse is assigned to an inventory status of available.
You need to set up an inventory status for damaged items so that they are not sold to customers.
Which values should you use? To answer, select the appropriate options in the answer area.
NOTE: Each correct selection is worth one point.
Hot Area:

Suggestion Answer:

Question #: 93
Topic #: 1
Your company makes use of a Dynamics 365 Supply Chain Management system.
After implementing warehouse locations, you are tasked with configuring location directives for inventory movement.
You need to make use of a location directive that allows for the identification of similar items in the warehouse.
Which of the following is the strategy you should use?

A. Match packing quantity
B. Location aging FIFO
C. Location aging LIFO
D. Consolidate

Selected Answer: D

Question #: 94
Topic #: 6
A company uses Dynamics 365 Supply Chain Management.
The company is consistently short on inventory for a group of produced finished good items. This creates customer service issues.
You need to ensure that production orders are automatically created when inventory is low.
Which two actions should you perform? Each answer represents a partial solution.
NOTE: Each correct selection is worth one point.

A. Update the item maximum.
B. Update the item minimum.
C. Set Capable to Promise.
D. Create a safety stock journal.
E. Create a transfer journal.

Selected Answer: BD

Question #: 95
Topic #: 2
Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals. Some question sets might have more than one correct solution, while others might not have a correct solution.
After you answer a question in this section, you will NOT be able to return to it. As a result, these questions will not appear in the review screen.
You are the purchasing manager at a manufacturing company that makes audio equipment.
You sign an agreement with a vendor to purchase 5,000 speaker cables, item C0001, at a discounted rate of $3.00 per cable. This agreement expires in exactly one year.
You need to set up pricing information and track the fulfillment of the agreement.
Solution:
✑ Create a purchase agreement of type Product value commitment.
✑ Add a line for item C0001.
✑ Enter a product value of $15,000 and enter an expiration date of one year.
Does the solution meet the goal?

A. Yes
B. No

Selected Answer: B

Question #: 96
Topic #: 3
HOTSPOT –
A company plans to stock new items and value those items by using FIFO principle. The company has multiple sites set up. There are multiple warehouses for each site.
You must be able to view the value and quantity of these items at each warehouse.
You need to apply FIFO costing per warehouse.
How should you complete the costing setup? To answer, select the appropriate options in the answer area.
NOTE: Each correct selection is worth one point.
Hot Area:

Suggestion Answer:

Question #: 97
Topic #: 5
You are the logistics manager at a distribution company.
Your primary carrier service provides rates for transportation between New York City and Colorado. These rates are a flat rate depending on the city or general area of pickup as follows:
✑ New York City = $500
✑ Colorado = $450
You need to set up Transportation Management to calculate the rate from New York City to Colorado.
What should you do?

A. Use a Point-to-Point engine based on weight and miles. Assign rates from New York City as the starting location and Colorado as the ending location and break the rates out based on the weight of the package.
B. Use a mileage-based rate engine to configure a rate master that calculates the rate based on the miles from New York City to Colorado.
C. Create hubs for both locations. Add a route plan from New York City to Colorado and assign the two charges as spot rates.
D. Set up zones in the Zone Master for New York City and Colorado. Assign rates to each zone in the Zone Master by starting and ending location.

Selected Answer: D

Question #: 98
Topic #: 4
A company uses Dynamics 365 Supply Chain Management.
A customer returns a product that is defective for a replacement.
You need to process the return order.
Which three actions should you perform? Each correct answer presents part of the solution.
NOTE: Each correct selection is worth one point.

A. Create a return of type Credit Only
B. Set the deadline date according to the company policy
C. Create a credit note for the replaced product
D. Set the delivery address to the customer’s address in the return order
E. Create a return of type Physical Return
F. Set the deadline date to the date the customer returns the defective product
G. Set the delivery address to the company warehouse in the return order

Selected Answer: BEG

Question #: 99
Topic #: 2
Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals. Some question sets might have more than one correct solution, while others might not have a correct solution.
After you answer a question in this section, you will NOT be able to return to it. As a result, these questions will not appear in the review screen.
You are the purchasing manager at a manufacturing company that makes audio equipment.
You sign an agreement with a vendor to purchase 5,000 speaker cables, item C0001, at a discounted rate of $3.00 per cable. This agreement expires in exactly one year.
You need to set up pricing information and track the fulfillment of the agreement.
Solution: On the released product, set a price of $3.00. Add the vendor to the vendor account field on the Purchase fast tab.
Does the solution meet the goal?

A. Yes
B. No

Selected Answer: B

Question #: 100
Topic #: 6
A company uses planning optimization in Dynamics 365 Supply Chain Management.
A planning optimization job is triggered by mistake from the user interface. The planning optimization job is running with incorrect runtime filters.
You need to resolve the issue.
What should you do?

A. Cancel the job from the plan history.
B. Cancel the job from the dialog box.
C. Disable the environment add-in.
D. Cancel the planning optimization fit analysis.

Selected Answer: B